BidHits uses cookies to provide an individualized service and care for the privacy and protection of shared data.
By browsing this site, we understand that you agree to the terms of our Privacy Policy.
Thickness Gauge Government Bids & RFPs
Government bid alerts, regional filters, and fast access to documents
See also
90% recommend BidHits (1093 real users, 09/04/2026).Methodology
USA | DC | DISTRICT OF COLUMBIA COUNTY | WASHINGTON
Two water flowmeters with associated thickness gauges for the Zones, Texas - This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Part 12. This announcement constitutes only the solicitation. Quotations are being requested and a separate written solicitation
AI helper
The Texas NRCs is requesting quotations for two water flowmeters with associated thickness gauges. The contractor must deliver the equipment to designated locations by September 30, 2026. The acquisition is set aside for small business concerns. Compliance with OSHA and EPA regulations is required.
The contractor will complete the requirements listed in the contractors responsibilities section by September 30, 2026. the contractor will complete the requirements listed in the contractors responsibilities section byseptember 30, 2026.
The contractor will provide an itemized packing slip with serial numbers and warranty information where applicable for each location. The contractor will provide an itemized packing slip with serial numbers and warranty information where applicable for each location.
Mowing deck - 15ft - Mowing Attachment Lower Deck Thickness - 0. 17 in. Side Skirt Thickness - 3. 0 gauge Lower Deck Thickness - 7. 0 gauge Upper Deck Thickness - 11. 0 gauge Transport Width ( At Wing Wheels) - 8. 0 ft Side Skirt Thickness - 0. 24 in. Upper Deck Thickness
Mowing attachment 15ft mowing attachment, full double deck mower
AI helper
The procurement is for a 15ft mowing attachment with various specifications including deck thickness, side skirt thickness, and blade tip speeds. The gearbox has a 5-year warranty. The machine must be serviceable by the manufacturer within 50 miles of Fort Bragg.
The gearbox warranty is 5 years. gearbox warranty 5 years
North Fork French Creek Pipe Arch Materials - Amendment **** - The purpose of this amendment is to extend the delivery date from 09/30/2026 to 12/31/2026 to allow additional time for delivery of materials. The offer due date remains 8/7 **** ( MT). There are no other changes.
Steel structural plate pipe arch One steel structural plate pipe arch, complete purchase and delivery. Minimum 16 ft span x 10 ft rise x 60 ft long. Minimum thickness of 8 gauge including all hardware and plans for assembly.
AI helper
Procurement of one steel structural plate pipe arch for the North Fork French Creek crossing. Delivery is FOB destination to Laramie, WY, with a required advance notification of 14 days. The delivery date has been extended to 12/31/2026. Inspection will occur upon delivery. Standard manufacturer warranty applies. This is a total small business set aside acquisition.
The delivery date has been extended to 12/31/2026. The purpose of this amendment is to extend the delivery date from 09/30/2026 to 12/31/2026 to allow additional time for delivery of materials.
Standard manufacturer warranty applies. Standard manufacturer warranty.
This acquisition is set aside for small business concerns. This acquisition is set aside for small business concerns.
Traffic Signs and Posts Polk County is seeking the supply of Traffic Signs and Posts. Please take note of the added langauge in Part III Specifations regardging the thickness of Traffic Signs- Traffic signs to meet current Manual on Uniform Traffic Control Devices ( MUTCD) requirements. All traffic control signs shall be ****- inch ( 3. 2mm) thick aluminum panel faced with Type 3 High Intensity Prismatic ( HIP) retro- reflective sheeting.
traffic signs and posts Traffic signs ( ****- inch thick aluminum panel with type 3 high intensity prismatic retro- reflective sheeting), Telespar or equivalent sign posts ( steel, galvanized, square tube, 12 gauge or 14 gauge, with pre- punched holes), Steel rivets. Specific sign types include: stop ahead, advisory speed plaques ( ****), speed limit signs ( ****), chevrons, double arrow, deer crossing, left curve, left object marker, neighborhood, no passing zone, right object marker, right reverse curve, stop signs. Post sizes include: 2x2 ( 12 ga and 14 ga), **** ( 12 ga), **** ( 14 ga).
AI helper
Polk County is seeking bids for traffic signs and posts. Bids are due August 6, 2026, at 2:00 PM CST and must be submitted electronically via BidNet Direct. Traffic signs must meet MUTCD requirements, be 0. 125-inch thick aluminum with type 3 high-intensity prismatic retro-reflective sheeting. Sign posts are specified as Telespar or equivalent steel posts with specific gauge, finish, and hole dimensions. A preference will be given to Iowa-based products and labor. Payment terms are standard, with potential delays until the next fiscal year. The county reserves the right to reject any or all bids.
Bids are due by 2:00 PM CST on August 6, 2026. bids will be allowed until 2:00 p. m. cst, thursday, august 6, 2026.
Polk County cannot make prepayments. Payments for services may be withheld until the beginning of the fiscal year (July 1st, 2026), with no interest allowed for such delays. pending polk county fiscal year current budget status, payment for services rendered may need withheld until beginning of fiscal year 2026 july 1st, 2026, at which point payment will be issued in full for all past due invoicing. interest payment will not be allowed in this scenario.
Protests must be submitted in writing to the procurement supervisor within three days of receiving the intent to award notification. if a bidder feels that an intent to award has been made unfairly or improperly, the bidder has the right to protest that intent to award within three 3 days of receiving the notification of award.
North Fork French Creek Pipe Arch Materials - This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Part 12. This announcement constitutes the only solicitation. Quotes are being requested and a separate written solicitation wi
Steel structural plate pipe arch One steel structural plate pipe arch, complete purchase and delivery. Minimum 16 ft span x 10 ft rise x 60 ft long. Minimum thickness of 8 gauge including all hardware and plans for assembly.
AI helper
Purchase and delivery of one steel structural plate pipe arch (16 ft span x 10 ft rise x 60 ft long, min 8 gauge thickness) to Laramie, WY. Delivery must be arranged 14 days in advance. Inspection upon delivery. Standard manufacturer warranty applies. This is a total small business set aside acquisition. Offer due date: July 31st, 2026, **** MT.
Deliveries must be arranged 14 days in advance. The offer due date is July 31st, 2026, at **** MT.
The product comes with a Standard manufacturer warranty.
This acquisition is set aside for small business concerns. The applicable NAICS code is ****, with a small business size standard of 1,000 employees. All responsible sources may submit a quotation.
We selected the most helpful reviews from real users. Order may change periodically.
I like the way they provide information with the greatest possible accuracy. I love that.
M. A. Neil
The search engine that finds what I'm looking for just by entering keywords
J. P. L. Construccion
The idea of ​​using a keyword and sending the information by email is very good.
U. Solutions
I consistently received notifications about bids within the specific segment I chose to monitor. The system simplifies processes that used to be complex, offering a navigation experience that is easy, fast, and modern.
G. P. da S. E. Guimaraes
All bids related to our product are captured by you and sent to us. In my opinion, it’s perfect—broad coverage and easy searches across the bid documents.
R. M. Ferreira
The information helps me submit my bids on time for bids, and I also have readily available information on upcoming bids. So far, I am very satisfied with what I have received.
M. A. Z. Armenta
Excellent information. Just what I was looking for.
L. H. Borrelli
It encompasses all portals in one place.
G. Ferrea
It gives me information on bids that interest me. It's easy to find bids.
A. Armenta
Great recommendations appear. Having the bid process link right in the email body helps a lot and saves time.
V. Kafka
You see a lot of tenders; you get emails with the alerts.
M. Camarasa
The bids appear appropriately based on my interests.
BidHits is a government bid search engine that monitors official portals and brings relevant federal, state and local opportunities into one place. You can search on the site and receive scheduled email alerts.
Enter your email and activate the trial. For 14 days you can use the main features, including alerts and access to results. When it ends, if you do not subscribe at /subscription.php, the bid list becomes limited and you will not be charged automatically.
1) Add keywords that describe what you sell. 2) Start the trial. 3) Adjust regions, delivery times and email style after signup.
Whenever possible, yes. Some official portals require login or block direct links; in those cases we point you to the official process page so you can download the documents.
Yes. You can filter by region, procurement method, dates and value ranges. You can also save preferences for future alerts and searches.
Yes. In the dashboard you can see bids on a map and use it to plan follow-up by location.
It can happen. Smart Search uses your keywords to find related opportunities, not only exact matches. Add specific terms and remove off-topic results to improve future alerts.
Yes. You can query bids via API. Documentation at /api_integration.php. Ideal for CRM, BI and automations.
In Settings you can pause alerts or adjust delivery times. If you want to delete your account, just contact us. During the free trial there is no auto-charge.
We monitor major official sources every day at the federal, state and local levels. New bid notices are added as soon as they are captured from the source portal.
Plans start at $ 43.00 per month, with options for different business needs and billing terms. Start with a free trial and evaluate the results before subscribing, with no automatic billing.
Add what you sell, get scheduled alerts, open documents or the official page, and use filters by region and method.
Transcript
Welcome to BidHits.
Finding public tenders and bids is important. But what really matters is quickly identifying the opportunities that match what your company sells.
To get started, enter a few keywords that describe your products or services. BidHits shows relevant opportunities, highlights your keywords, and organizes everything by date.
Smart search is already enabled and uses artificial intelligence to expand your results, even when the tender uses different words from the ones you searched for.
For each opportunity, you can view a summary, access documents, mark it as a favorite, add private notes, remove what is not relevant, or view it on the map.
You can also use filters, run searches, and explore the day's opportunities directly on the map.
Start using BidHits now. It's fast, practical, and you can try it for free.
AI Assistant
Ask me about the bid...
Loading summary...
Methodology
Unaided survey with 1093 active users, conducted through 09/04/2026.
Single question: "Would you recommend our services to a friend or colleague?" - 90% answered "yes".