Lot 5: - DuMor # 441- **** OUTDOOR PLANTERS- OR APPROVED EQUAL- SPECIFICATIONS: - Outdoor planters should be approximately twenty ( 20) to thirty ( 30) inches in height. - Expansion anchors should be provided. - All products must be 100% BLEACH cleanable to reduce the spread of infectious diseases. - Materials that needs to be used for the outdoor furniture is as follows: wood- grain recycled plastic slats, steel tubing, steel sheets, stainless steel, cast aluminum, steel plate, carbon steel flat bars, and steel expansion anchors. - All finished powder- coated parts should comply with the following ASTM methods for coating and coating method: ASTM- D- 523, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- B- 117, and ASSTM- D- ****- Minimum twenty ( 20)- year limited warranty on structural failure of frame, a ten ( 10)- year limited warranty on structural failure of recycled plastic, a five ( 5) year limited warranty against finish failure on all powder- coated products, and a one ( 1)- year limited warranty on all other items. SHIPPING IS TO BE INCLUDED IN BID OFFER. Bidders who propose alternate brands/specifications should enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non- responsive bid. If the brands are not changed, the contract will be written accordingly and the successful bidder shall be required to deliver the brand/specification stated in the solicitation.
Lot 1: - DuMor # 502- 32TX- BT Exterior Trash cans- OR APPROVED EQUAL- SPECIFICATIONS: - Trash cans should have a receptacle body and cover. - The liner should have at least a thirty- two ( 32)- gallon capacity. - Expansion anchors should be provided. - All products must be 100% BLEACH cleanable to reduce the spread of infectious diseases. - Materials that needs to be used for the outdoor furniture is as follows: wood- grain recycled plastic slats, steel tubing, steel sheets, stainless steel, cast aluminum, steel plate, carbon steel flat bars, and steel expansion anchors. - All finished powder- coated parts should comply with the following ASTM methods for coating and coating method: ASTM- D- 523, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- B- 117, and ASSTM- D- ****- Minimum twenty ( 20)- year limited warranty on structural failure of frame, a ten ( 10)- year limited warranty on structural failure of recycled plastic, a five ( 5) year limited warranty against finish failure on all powder- coated products, and a one ( 1)- year limited warranty on all other items. SHIPPING IS TO BE INCLUDED IN BID OFFER. Bidders who propose alternate brands/specifications should enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non- responsive bid. If the brands are not changed, the contract will be written accordingly and the successful bidder shall be required to deliver the brand/specification stated in the solicitation.
Lot 2: - DuMor # 505- 60TX OUTDOOR BENCHES- OR APPROVED EQUAL- SPECIFICATIONS: - The seat height for outdoor benches should be approximately eighteen ( 18) inches. - Benches should be approximately seventy- five ( 75) inches wide, twenty- six ( 26) inches deep, and thirty- five ( 35) inches in height. - Benches should bear a weight capacity of seven hundred fifty ( 750) pounds. - All products must be 100% BLEACH cleanable to reduce the spread of infectious diseases. - Materials that needs to be used for the outdoor furniture is as follows: wood- grain recycled plastic slats, steel tubing, steel sheets, stainless steel, cast aluminum, steel plate, carbon steel flat bars, and steel expansion anchors. - All finished powder- coated parts should comply with the following ASTM methods for coating and coating method: ASTM- D- 523, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- B- 117, and ASSTM- D- ****- Minimum twenty ( 20)- year limited warranty on structural failure of frame, a ten ( 10)- year limited warranty on structural failure of recycled plastic, a five ( 5) year limited warranty against finish failure on all powder- coated products, and a one ( 1)- year limited warranty on all other items. SHIPPING IS TO BE INCLUDED IN BID OFFER. Bidders who propose alternate brands/specifications should enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non- responsive bid. If the brands are not changed, the contract will be written accordingly and the successful bidder shall be required to deliver the brand/specification stated in the solicitation.
Lot 3: - DuMor # 481- 20TX OUTDOOR CHAIRS- OR APPROVED EQUAL- SPECIFICATIONS: - The seat height for outdoor chairs should be approximately seventeen ( 17) inches. - The chairs should be approximately twenty- seven ( 27) inches wide and twenty- five ( 25) inches deep. - Chairs should bear a weight capacity of three hundred fifty ( 350) pounds. - All products must be 100% BLEACH cleanable to reduce the spread of infectious diseases. - Materials that needs to be used for the outdoor furniture is as follows: wood- grain recycled plastic slats, steel tubing, steel sheets, stainless steel, cast aluminum, steel plate, carbon steel flat bars, and steel expansion anchors. - All finished powder- coated parts should comply with the following ASTM methods for coating and coating method: ASTM- D- 523, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- B- 117, and ASSTM- D- ****- Minimum twenty ( 20)- year limited warranty on structural failure of frame, a ten ( 10)- year limited warranty on structural failure of recycled plastic, a five ( 5) year limited warranty against finish failure on all powder- coated products, and a one ( 1)- year limited warranty on all other items. SHIPPING IS TO BE INCLUDED IN BID OFFER. Bidders who propose alternate brands/specifications should enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non- responsive bid. If the brands are not changed, the contract will be written accordingly and the successful bidder shall be required to deliver the brand/specification stated in the solicitation.
Lot 4: - DuMor # 6B- 519TX- UMB OUTDOOR TABLES- OR APPROVED EQUAL- SPECIFICATIONS: - Outdoor tables should be approximately forty- eight ( 48) inches in diameter and thirty ( 30) inches in height. - Tables should have an umbrella hole in the center. - Expansion anchors should be provided. - All products must be 100% BLEACH cleanable to reduce the spread of infectious diseases. - Materials that needs to be used for the outdoor furniture is as follows: wood- grain recycled plastic slats, steel tubing, steel sheets, stainless steel, cast aluminum, steel plate, carbon steel flat bars, and steel expansion anchors. - All finished powder- coated parts should comply with the following ASTM methods for coating and coating method: ASTM- D- 523, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- B- 117, and ASSTM- D- ****- Minimum twenty ( 20)- year limited warranty on structural failure of frame, a ten ( 10)- year limited warranty on structural failure of recycled plastic, a five ( 5) year limited warranty against finish failure on all powder- coated products, and a one ( 1)- year limited warranty on all other items. SHIPPING IS TO BE INCLUDED IN BID OFFER. Bidders who propose alternate brands/specifications should enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non- responsive bid. If the brands are not changed, the contract will be written accordingly and the successful bidder shall be required to deliver the brand/specification stated in the solicitation.
Lot 5: - DuMor # 441- **** OUTDOOR PLANTERS- OR APPROVED EQUAL- SPECIFICATIONS: - Outdoor planters should be approximately twenty ( 20) to thirty ( 30) inches in height. - Expansion anchors should be provided. - All products must be 100% BLEACH cleanable to reduce the spread of infectious diseases. - Materials that needs to be used for the outdoor furniture is as follows: wood- grain recycled plastic slats, steel tubing, steel sheets, stainless steel, cast aluminum, steel plate, carbon steel flat bars, and steel expansion anchors. - All finished powder- coated parts should comply with the following ASTM methods for coating and coating method: ASTM- D- 523, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- B- 117, and ASSTM- D- ****- Minimum twenty ( 20)- year limited warranty on structural failure of frame, a ten ( 10)- year limited warranty on structural failure of recycled plastic, a five ( 5) year limited warranty against finish failure on all powder- coated products, and a one ( 1)- year limited warranty on all other items. SHIPPING IS TO BE INCLUDED IN BID OFFER. Bidders who propose alternate brands/specifications should enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non- responsive bid. If the brands are not changed, the contract will be written accordingly and the successful bidder shall be required to deliver the brand/specification stated in the solicitation.
