Cargo Cover Biddings - Procurement Opportunities

Lot 1: 20- foot box trailer - SPECIFICATIONS- Gross Vehicle Weight Rating ( GVWR): Minimum 14, 000 pounds. Size: Interior Net Height ( including beam width and lighting width): Minimum 7 feet, 4 inches ( 88 inches). Trailer Width: 8. 5 feet. Length: 20- foot box Both the 20- foot box and 24- foot box trailers to be built to work and look the same. Frame: Frame Type: Rectangular Tube. Frame Material: Aluminum ( Minimum 11 gauge for frame). Frame Configuration ( Spacing on Center): 12 inches of spacing. Nose Type: Flat. Tongue Option: A- Frame ( Extended). Front Jack Options: Electric. Ball Coupler: 2 5/16 inches. Wiring: Wire tubing around wires along the inside of frame. Roof: Rounded Aluminum with no seams. Seam: Aluminum ( Seamless). Vent: Minimum two ( 2) Vents Centered Vents must be hood covered and evenly distributed on center. Walls, Flooring, and Doors: Attachment Method: Screwless. Insulated walls, ceiling, and roof. Under Flooring Corrosion- Inhibiting Moisture Barrier. Rubber Tread Plate ( RTP) on interior floor and wheel wells. Skin Thickness: 0. 05 inches. Street Side Door: Minimum 36 inches X 78 inches - forward placement. Rear Door Type: Heavy Duty Ramp Door with flap and extension Prefer gapless continuous hinge. Flooring Material: Aluminum. Axle, Suspension, Brake, and Tire: Number of Axles: Two ( 2) ( tandem) - 7, 000 pounds per axle. Type of Axles: Torsion. Brake System: Electric Tire Size: Must be ST235/80R16 Radial Tire Load Range: Minimum E- 10 ply rated. Spare tire and wheel must be included and the same as what on the trailer Cargo and Interior Area: E- Track t: Must be attached to frame by weld. Wall Locations: Three ( 3) recessed tracks the length of the entire wall - On center at 15 inches, 44 inches, 64 inches. Floor Locations: Three ( 3) recessed tracks - Entire length of floor - Placed on both outer edges and one on center. D- Rings: Attached to frame by weld. Floor Locations: Minimum six ( 6) recessed, 5, 000 pounds each, D- Ring anchors ( 2 - Front, 2 - On Center, 2 - Rear). Lighting: In
Lot 2: 24- foot box trailer - SPECIFICATIONS- Gross Vehicle Weight Rating ( GVWR): Minimum 14, 000 pounds. Size: Interior Net Height ( including beam width and lighting width): Minimum 7 feet, 4 inches ( 88 inches). Trailer Width: 8. 5 feet. Length: 24- foot box Both the 20- foot box and 24- foot box trailers to be built to work and look the same. Frame: Frame Type: Rectangular Tube. Frame Material: Aluminum ( Minimum 11 gauge for frame). Frame Configuration ( Spacing on Center): 12 inches of spacing. Nose Type: Flat. Tongue Option: A- Frame ( Extended). Front Jack Options: Electric. Ball Coupler: 2 5/16 inches. Wiring: Wire tubing around wires along the inside of frame. Roof: Rounded Aluminum with no seams. Seam: Aluminum ( Seamless). Vent: Minimum two ( 2) Vents Centered Vents must be hood covered and evenly distributed on center. Walls, Flooring, and Doors: Attachment Method: Screwless. Insulated walls, ceiling, and roof. Under Flooring Corrosion- Inhibiting Moisture Barrier. Rubber Tread Plate ( RTP) on interior floor and wheel wells. Skin Thickness: 0. 05 inches. Street Side Door: Minimum 36 inches X 78 inches - forward placement. Rear Door Type: Heavy Duty Ramp Door with flap and extension Prefer gapless continuous hinge. Flooring Material: Aluminum. Axle, Suspension, Brake, and Tire: Number of Axles: Two ( 2) ( tandem) - 7, 000 pounds per axle. Type of Axles: Torsion. Brake System: Electric Tire Size: Must be ST235/80R16 Radial Tire Load Range: Minimum E- 10 ply rated. Spare tire and wheel must be included and the same as what on the trailer Cargo and Interior Area: E- Track: Must be attached to frame by weld. Wall Locations: Three ( 3) recessed tracks the length of the entire wall - On center at 15 inches, 44 inches, 64 inches. Floor Locations: Three ( 3) recessed tracks - Entire length of floor - Placed on both outer edges and one on center. D- Rings: Attached to frame by weld. Floor Locations: Minimum six ( 6) recessed, 5, 000 pounds each, D- Ring anchors ( 2 - Front, 2 - On Center, 2 - Rear). Lighting: Inte

Offerors must submit proposals to the contracting office email addresses: ***@***. *. * and ***@***. *. * no later than Monday, 12 May 2025 at 12:00 CET (Central European Time). Offerors must be registered in the System for Award Management (SAM) and, if not US offerors, in the Joint Contingency Contracting System (JCCS). Questions regarding the RFP are due by 09 May 2025 at 2:00 CET. Proposals must be in English and US Dollars. Offerors agree to hold pricing for 30 calendar days. Proposals will be evaluated on technical acceptability, past performance, and price. The government reserves the right to further negotiate with offerors. The solicitation is issued in accordance with FAR 13. 103. The performance work statement (PWS) covers transportation services for the African Maritime Forces Summit (AMFS) 2025 in Mauritius, including airport shuttles, shuttle services between hotels, 24-hour on-call transportation, and transportation of personnel and equipment. Drivers must be qualified, licensed, insured, and familiar with the local area. Vehicles must be in good condition and meet safety standards. In case of vehicle breakdown, an equitable replacement vehicle must be provided within one hour. The technical point of contact (TPOC) will provide the conference program and schedule at least one week prior to the event. Flight information for all travelers will be captured during the registration process. The contract period is from 19 June to 02 July 2025.

The Naval Air Warfare Center Aircraft Division (NAWCAD) intends to negotiate and award a sole-source contract for specialized aircraft maintenance and repair shop equipment. Boeing is the original equipment designer and developer, and Industrial Automation is the only authorized vendor. Responses to this notice must be submitted by June 15, 2024. All responsible sources may submit a capability statement, proposal, or quotation. A determination not to compete this requirement is within the discretion of the government.

The Defense Logistics Agency (DLA) Land and Maritime is soliciting supplies on a non-full and open competition basis. The acquisition is for 46 units of amc cover, vehicular comp (part ****), specifically the ****, trk cgo item. The sole source justification is based on Mcclarin Plastics, LLC being the only known source with the necessary data for manufacturing. A sources sought posting was made on SAM. gov for 5 business days, with no responses. A market survey was also conducted, with only Mcclarin Plastics, LLC and JGils LLC responding. A price analysis will be conducted using historical pricing, the producer price index (PPI), and learning curve analysis. Cost or pricing data will be requested if the offer exceeds the $2M threshold. The anticipated cost to the government is deemed fair and reasonable.

Quotes are requested for retrofitting two Ford Transit vans. The quotes are due May 7, 2025, at 11:00 AM PDT. Offerors must submit a completed vendor information and price schedule, a detailed item breakdown price list, a capability statement, and a van design with their quote. The solicitation incorporates FAR clauses by reference. The period of performance is from **** to 08132025. The acquisition is a 100% small business set-aside.