BidHits™ uses cookies to provide an individualized service and care for the privacy and protection of shared data.
By browsing this site, we understand that you agree to the terms of our Privacy Policy.
Lens Blocking Equipment and installation for the Optical Fabrication Lab - The contractor shall provide the equipment and the qualified technician services to install Lens Blocking Equipment for the Optical Fabrication Lab, U. S. Army Medical Materiel Center- Korea, the U. S. Army Medical Materiel Center- Korea ( USAMMC- K). t
The contractor must provide equipment and qualified technician services to install lens blocking equipment for the optical fabrication lab at USAMMC-Korea. Installation must begin after contract award and be coordinated with the government POC. The vendor must provide written confirmation within 30 days of installation completion that equipment is ready for use, along with training. All installation must adhere to industry standards and OSHA regulations. Delivery is required on or before 30 Sep 2026.
Delivery must be on or before 30 Sep 2026. delivery on or before delivery date 30 sep 2026
Award will be made using the lowest price technically acceptable lpta process. award will be made using the lowest price technically acceptable lpta process
Installers must be certified by the manufacturing company of the equipment. installers shall be certified by the manufacturing company of the equipment
Industrial Lens Blocker - This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12. 6 and FAR Part 13 Simplified Acquisition Procedures, as supplemented with additional information included in this notice. This a
This is a Request for Quote (RFQ) for industrial lens blockers (Visionix C6). Offers must be submitted via email to ***@***. *. * by August 21, 2026, at 06:00 am CST. The delivery deadline is on or before September 30, 2026. The procurement is a small business set aside. Technical capability and fair and reasonable pricing will be used for evaluation. Questions must be submitted by August 19, 2026.
The estimated delivery date is on or before 30 September 2026. delivery on or beforedelivery date 30 sep 2026
The government will issue an award. . . to the responsible contractor whose quote meets or exceeds the minimum technical requirements of the solicitation and provides fair and reasonable pricing. the government will issue an award resulting from this solicitation to the responsible contractor whose quote meets or exceeds the minimum technical requirements of the solicitation and provides fair and reasonable pricing.
Offerors must be properly registered in the system for awardmanagement sam. to be eligible for award, offerors must be properly registered in the system for awardmanagement sam.
An unacceptable rating will be assessed on any offeror that demonstrates any of the following: failure to meet the salient characteristics set forth in the solicitation. an unacceptable rating will be assessed on any offeror that demonstrates any of the following: failure to meet the salient characteristics set forth in the solicitation.
C6 Industrial Blocker - This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12. 6 and FAR Part 13 Simplified Acquisition Procedures, as supplemented with additional information included in this notice. This a
This is a Request for Quote (RFQ) for Visionix USA Weco C6 Industrial Blocker and related items. Offers must be submitted electronically via email to Mr. Efren Ramirez by August 17, 2026, at 06:00 am CST. Questions must be submitted by August 13, 2026. The procurement is a small business set-aside. Technical capability and fair and reasonable pricing will be used for evaluation. Delivery is required on or before September 30, 2026.
Delivery must be on or before September 30, 2026. delivery on or before delivery date 30 sep 2026
The award will be based on an acceptable technical capability rating and fair and reasonable pricing.
Offerors must be properly registered in the system for awardmanagement sam.
An unacceptable rating will be assessed on any offeror that failure to meet the salient characteristics set forth in the solicitation.
The evaluation will consider technical capability and price.
Optical Fabrication Lab Equipment Maintenance - The Contractor shall provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and other items and non- personal services necessary to perform preventative maintenance and remote technical support for th
Optical Fabrication Lab Equipment Maintenance Preventative maintenance and remote technical support for optical fabrication equipment, including specific models such as Satisloh HC6, Magnaspin, Art Deblocker M, Art Blocker M, Toroflex, and VFT Marco. The contract includes options for multiple years of service.
AI helper
This is a Request for Quotation (RFQ) for optical fabrication lab equipment maintenance. The contractor will provide preventative maintenance and remote technical support for specific Satisloh equipment. The offer due date is August 6, 2026. The contract includes a base year and four option years. The acquisition is unrestricted and set aside for small businesses. The NAICS code is 811210. The contracting office is Medical Readiness Contr Office West. Contact is Wayne Shavers at **** or wayne. shavers. civ@health. mil.
The period of performance for the base year is from September 1, 2026, to August 31, 2027. Option years extend the performance period annually through August 31, 2031.
Invoicing and payment shall be executed through the Procurement Integrated Enterprise Environment (PIEE) utilizing Wide Area Workflow (WAWF) in accordance with DFARS 252. 2327006. The contractor shall submit invoices matching the established contract line item numbers (CLINs) for base maintenance, flexible emergency hours, and separately billed parts.
Offers will be evaluated on their price. All quotes will be evaluated on their price. Failure to provide a fully compliant offer, and/or fair and reasonable price as determined by the contracting officer, will render the quote ineligible for award.
Contractors must ensure that all technicians performing work are original equipment manufacturer (OEM) certified or possess documented equivalent training and certification to perform maintenance, calibration, and repairs on the specified optical fabrication equipment.
Failure to provide a fully compliant offer, and/or a fair and reasonable price as determined by the contracting officer, will render the quote ineligible for award.
Cylindrical Twin Under Door Draft stoppers - The 410th CSB, Regional Contracting Office is requesting prices to procure 800ea Cylindrical Twin Under Door Draft stopper and 800ea Self- adhesive Vinyl Door Sweep. ( for more product details refer to the two attachments provided).
Door draft stoppers and door sweeps Lot 1: 800 units cylindrical twin under door draft stopper ( up to 38 inches adjustable design, maximum gap fill 1. 7 inches, foam tubes, slide under door, durable polyester fabric cover or similar, noise reduction, dustproof, bugs blocker, waterproof, block out light, wind proof, color black or gray). Lot 2: 800 units self- adhesive vinyl door sweep ( vinyl, single fin sweep type, minimum thickness/depth of 0. 13 inches for mounting strip, 1. 8 inches width and 1. 5 inches height, 36 in. L, seals gap up to 1. 0 inch, installs without hardware using 3M adhesive, seals against drafts, moisture, dust, insects, saves energy, color brown and black).
AI helper
Request for pricing for 800 units of cylindrical twin under door draft stoppers and 800 units of self-adhesive vinyl door sweeps. Product details are available in attachments. Questions regarding this solicitation must be submitted by July 27, 2026.
We selected the most helpful reviews from real users. Order may change periodically.
Very good and accurate information about the tenders: consistent and precise.
G. R. Ortiz
Excellent information. Just what I was looking for.
L. H. Borrelli
It helps me identify areas of opportunity and find bids related to my work area.
I. J. R. Beltran
The idea of ​​using a keyword and sending the information by email is very good.
U. Solutions
I consistently received notifications about bids within the specific segment I chose to monitor. The system simplifies processes that used to be complex, offering a navigation experience that is easy, fast, and modern.
G. P. da S. E. Guimaraes
All bids related to our product are captured by you and sent to us. In my opinion, it’s perfect—broad coverage and easy searches across the bid documents.
R. M. Ferreira
I like the way they provide information with the greatest possible accuracy. I love that.
M. A. Neil
I liked the way they search for bids and provide us with the link to view them.
C. J. P. Perez
The filtering is well done, and I also receive the bids I can participate in directly in my email.
E. B. Da Fonseca
It encompasses all portals in one place.
G. Ferrea
Very efficient: I receive the bids quickly.
J. P. R. Rivera
Efficiency in search times.
R. Chavez
The website features a comprehensive list of bids, and I can find all bids for the desired subject matter.
BidHits is a government bid search engine that monitors official portals and brings relevant federal, state and local opportunities into one place. You can search on the site and receive scheduled email alerts.
Enter your email and activate the trial. For 14 days you can use the main features, including alerts and access to results. When it ends, if you do not subscribe at /subscription.php, the bid list becomes limited and you will not be charged automatically.
1) Add keywords that describe what you sell. 2) Start the trial. 3) Adjust regions, delivery times and email style after signup.
Whenever possible, yes. Some official portals require login or block direct links; in those cases we point you to the official process page so you can download the documents.
Yes. You can filter by region, procurement method, dates and value ranges. You can also save preferences for future alerts and searches.
Yes. In the dashboard you can see bids on a map and use it to plan follow-up by location.
It can happen. Smart Search uses your keywords to find related opportunities, not only exact matches. Add specific terms and remove off-topic results to improve future alerts.
Yes. You can query bids via API. Documentation at /api_integration.php. Ideal for CRM, BI and automations.
In Settings you can pause alerts or adjust delivery times. If you want to delete your account, just contact us. During the free trial there is no auto-charge.
We monitor major official sources every day at the federal, state and local levels. New bid notices are added as soon as they are captured from the source portal.
Plans start at $ 43.00 per month, with options for different business needs and billing terms. Start with a free trial and evaluate the results before subscribing, with no automatic billing.
Add what you sell, get scheduled alerts, open documents or the official page, and use filters by region and method.
Transcript
Welcome to BidHits.
Finding public tenders and bids is important. But what really matters is quickly identifying the opportunities that match what your company sells.
To get started, enter a few keywords that describe your products or services. BidHits shows relevant opportunities, highlights your keywords, and organizes everything by date.
Smart search is already enabled and uses artificial intelligence to expand your results, even when the tender uses different words from the ones you searched for.
For each opportunity, you can view a summary, access documents, mark it as a favorite, add private notes, remove what is not relevant, or view it on the map.
You can also use filters, run searches, and explore the day's opportunities directly on the map.
Start using BidHits now. It's fast, practical, and you can try it for free.
AI Assistant
Ask me about the bid...
Loading summary...
Methodology
Unaided survey with 1098 active users, conducted through 09/23/2026.
Single question: "Would you recommend our services to a friend or colleague?" - 90% answered "yes".
™
