Commonwealth Of Kentucky - Office Of The Controller- KY
Trailers
Bid Close Date:
Lot 1: GVWR: Approximately 48, 800 lbs. PAYLOAD CAPACITY RATING: Minimum 40, 000 lbs. DECK LENGTH: Minimum 20' flat deck length. DECK HEIGHT: Unit shall have an empty deck height of 36" OVERALL LENGTH: Maximum 32' OVERALL WIDTH: Approximately 102" with wide track axles. DOUBLE- BREAK BEAVERTAIL: Unit shall be fabricated with a 5' double- break beavertail, self- cleaning with angle turned upright. RAMPS: Two ( 2) each 21" x 60" minimum, adjustable bi- directional spring assist ramps with self- cleaning angle, turned upright, and tapered tread- plate ends. Ramps preferred to have a 15- degree approach to double break beavertail and fabricated in such a manner for individual ease of operation. Ramps shall fold over securely on beaver- tail when in transport. AXLES: Unit shall be equipped with dual Dana or Dexter 22, 500 lb. capacity axles, oil bath hubs with Stemco seals or equal. BRAKES: Air operated both axles, cam type brakes meeting the requirements of FMVSS121. Unit shall have a two- line system consisting of a service/control and emergency/supply line with a breakaway feature and Full ABS Modulation, conforming to DOT specifications. System shall include all necessary tubing, glad hand connectors with weather tight covers, air reservoirs, emergency valve, drain cocks, automatic slack adjusters and glad hand protectors. PARKING BRAKES: Unit shall have a spring applied/air release braking system and shall be installed on both axles. WHEELS: Trailer shall have eight ( 8) each 215/75R x 17. 5 H tubeless radials mounted on steel wheels. DECKING: Minimum 2" hardwood deck lumber. TIE- DOWNS: Unit shall have minimum ten ( 10) D- Rings, four ( 4) each located on left and right sides of trailer, and two ( 2) each located at front. D- Rings to have a minimum 5/8" diameter cross- section. HITCH: Unit shall have four ( 4) position adjustable pintle hitch. JACK: Minimum 25, 000- pound 2 speed, crank style jack. SAFETY CHAINS: Two ( 2) high tensile safety chains with " diameter cross section and locking hooks shall be provided
Lot 1: GVWR: Approximately 48, 800 lbs. PAYLOAD CAPACITY RATING: Minimum 40, 000 lbs. DECK LENGTH: Minimum 20' flat deck length. DECK HEIGHT: Unit shall have an empty deck height of 36" OVERALL LENGTH: Maximum 32' OVERALL WIDTH: Approximately 102" with wide track axles. DOUBLE- BREAK BEAVERTAIL: Unit shall be fabricated with a 5' double- break beavertail, self- cleaning with angle turned upright. RAMPS: Two ( 2) each 21" x 60" minimum, adjustable bi- directional spring assist ramps with self- cleaning angle, turned upright, and tapered tread- plate ends. Ramps preferred to have a 15- degree approach to double break beavertail and fabricated in such a manner for individual ease of operation. Ramps shall fold over securely on beaver- tail when in transport. AXLES: Unit shall be equipped with dual Dana or Dexter 22, 500 lb. capacity axles, oil bath hubs with Stemco seals or equal. BRAKES: Air operated both axles, cam type brakes meeting the requirements of FMVSS121. Unit shall have a two- line system consisting of a service/control and emergency/supply line with a breakaway feature and Full ABS Modulation, conforming to DOT specifications. System shall include all necessary tubing, glad hand connectors with weather tight covers, air reservoirs, emergency valve, drain cocks, automatic slack adjusters and glad hand protectors. PARKING BRAKES: Unit shall have a spring applied/air release braking system and shall be installed on both axles. WHEELS: Trailer shall have eight ( 8) each 215/75R x 17. 5 H tubeless radials mounted on steel wheels. DECKING: Minimum 2" hardwood deck lumber. TIE- DOWNS: Unit shall have minimum ten ( 10) D- Rings, four ( 4) each located on left and right sides of trailer, and two ( 2) each located at front. D- Rings to have a minimum 5/8" diameter cross- section. HITCH: Unit shall have four ( 4) position adjustable pintle hitch. JACK: Minimum 25, 000- pound 2 speed, crank style jack. SAFETY CHAINS: Two ( 2) high tensile safety chains with " diameter cross section and locking hooks shall be provided
Lot 2: Tongue/Drawbar - 6' Continuation of Mainframe - 3" Eye 4 Position One Piece Frame. Pintle Hitch Setting - 32" Adjustable. Landing Gear Twin - Two Speed - 50, 000 Lbs. Toolbox In Gooseneck - Tool Tray in Tongue/Gooseneck. Safety Chains - Standard. Main Deck - One Piece Main Frame 14" Wide X 26# A572 Grade 50 Steel High Tensile. Cross Members 6" IBeams X 3. 7 Lbs. Per Ft. Side Rails C8" X 11. 5 Lbs. Per Ft 1 1/2" Nominal Apitong Decking, Flat Deck Design with Beavertail and Ramp Off the Rear. Loaded Deck Height - 33". Deck Length - 24'. Deck Width - 8' 6" Wide. Main Deck Flooring - Covered 1 1/2" Nominal Apitong. Dovetail - 5' Self Cleaning - Double Break. Rear Loading Ramps - Spring Assisted 72" X 24" Lay Flat Self Cleaning. Axles - ( 3) 22, 500 Lb Capacity, Air Brakes, Auto Slack, ABS. Axle Spacing - 49". Suspension - Spring with Front Air Lift. Brakes - 12 1/4" X 7 1/2" Spring Brakes - 2 Axle. Tires - ( 12) 215/75R17. 5. Wheels - ( 12) Steel Disc Wheels. Electrical - Fully Sealed Wiring Harness with LED Lights, Marker Lights and Mid- Turn Signals, ( 3) Oval Stop, Tail and Turn Lights Per Side on Rear. Strobe - No Amber Strobes. Metal Prep - White Blasted and Cleaned Prior To Painting. Primer - PPG 2- Part Primer. Paint - 2- Part PPG Black Acrylic Urethane. Load Securement - 12 Bent D' Rings, 2 Extra Welded Front Top of Deck. Spare Tire and Mount - None. Sidestep - Drivers Side.
Lot 3: Additional deck length in 1' increments to trailer described in Commodity Lines 1 and 2.
Lot 4: Increase the axle to 25, 000 lbs. per axle in lieu of 20, 000 lbs. per axle of unit described in Commodity Lines 1 and 2. Cross members will be increased 6" and springs to be upgraded.
Lot 5: 25- foot deck plus 5- foot dovetail Pressure Treated Lumber Deck 95- 115 inches overall width Two heavy duty flip down ramps with spring assist GVWR of 22, 000# to 26, 000# Payload of 17, 000# to 22, 000# Tandem Dual axles with electric over hydraulic oil bath brakes Heavy Duty Jack/Landing Gear Heavy Duty Rub Rail Stake Pockets Pipe Chain Spools between Stake Pockets Break- A- Way System with Charger 2- Full Size Mounted Spare Tire & wheels Powder coated frame Features: - Front Tool Box - 12, 000lb Warn Winch Mounted in Front Tool Box - Large 12v Battery mounted in Front Tool Box - Two Under Mount Tool Boxes - Minimum of 24" of length - Mounted under trailer deck - Steps at the front of trailer on both sides - Handrails mounted to neck upright of trailer near steps - Mud Flaps - DOT Reflective Tape Electrical: - LED trailer lights including brake, turn signal, reverse, and side marker lights - 24- 48" LED Light bar mounted to neck backwards to light up trailer deck - 7- way round plug
Lot 6: Length: 25' flat with 5' dovetail; Width: 102" Dual Tandem ( 8 wheels) 2 Axles: Minimum 12, 000lb Oil Bath with Electric Brakes GVWR: At least 24, 900 pounds, not to exceed 26, 000lbs Mainframe & Neck: Minimum 12" x 19# I- Beam Minimum 25, 000lb coupler with 2- 5/16" ball Min. 3" Crossmembers 2 heavy duty Flip- over 5' dovetail ramps with spring assist Radial Tires, Min. 16", Load range E Safety steps on each side with handles Deck height
Commonwealth Of Kentucky - Office Of The Controller- KY
Trailers
Bid Close Date:
Lot 1: GVWR: Approximately 48, 800 lbs. PAYLOAD CAPACITY RATING: Minimum 40, 000 lbs. DECK LENGTH: Minimum 20' flat deck length. DECK HEIGHT: Unit shall have an empty deck height of 36" OVERALL LENGTH: Maximum 32' OVERALL WIDTH: Approximately 102" with wide track axles. DOUBLE- BREAK BEAVERTAIL: Unit shall be fabricated with a 5' double- break beavertail, self- cleaning with angle turned upright. RAMPS: Two ( 2) each 21" x 60" minimum, adjustable bi- directional spring assist ramps with self- cleaning angle, turned upright, and tapered tread- plate ends. Ramps preferred to have a 15- degree approach to double break beavertail and fabricated in such a manner for individual ease of operation. Ramps shall fold over securely on beaver- tail when in transport. AXLES: Unit shall be equipped with dual Dana or Dexter 22, 500 lb. capacity axles, oil bath hubs with Stemco seals or equal. BRAKES: Air operated both axles, cam type brakes meeting the requirements of FMVSS121. Unit shall have a two- line system consisting of a service/control and emergency/supply line with a breakaway feature and Full ABS Modulation, conforming to DOT specifications. System shall include all necessary tubing, glad hand connectors with weather tight covers, air reservoirs, emergency valve, drain cocks, automatic slack adjusters and glad hand protectors. PARKING BRAKES: Unit shall have a spring applied/air release braking system and shall be installed on both axles. WHEELS: Trailer shall have eight ( 8) each 215/75R x 17. 5 H tubeless radials mounted on steel wheels. DECKING: Minimum 2" hardwood deck lumber. TIE- DOWNS: Unit shall have minimum ten ( 10) D- Rings, four ( 4) each located on left and right sides of trailer, and two ( 2) each located at front. D- Rings to have a minimum 5/8" diameter cross- section. HITCH: Unit shall have four ( 4) position adjustable pintle hitch. JACK: Minimum 25, 000- pound 2 speed, crank style jack. SAFETY CHAINS: Two ( 2) high tensile safety chains with " diameter cross section and locking hooks shall be provided
Lot 1: GVWR: Approximately 48, 800 lbs. PAYLOAD CAPACITY RATING: Minimum 40, 000 lbs. DECK LENGTH: Minimum 20' flat deck length. DECK HEIGHT: Unit shall have an empty deck height of 36" OVERALL LENGTH: Maximum 32' OVERALL WIDTH: Approximately 102" with wide track axles. DOUBLE- BREAK BEAVERTAIL: Unit shall be fabricated with a 5' double- break beavertail, self- cleaning with angle turned upright. RAMPS: Two ( 2) each 21" x 60" minimum, adjustable bi- directional spring assist ramps with self- cleaning angle, turned upright, and tapered tread- plate ends. Ramps preferred to have a 15- degree approach to double break beavertail and fabricated in such a manner for individual ease of operation. Ramps shall fold over securely on beaver- tail when in transport. AXLES: Unit shall be equipped with dual Dana or Dexter 22, 500 lb. capacity axles, oil bath hubs with Stemco seals or equal. BRAKES: Air operated both axles, cam type brakes meeting the requirements of FMVSS121. Unit shall have a two- line system consisting of a service/control and emergency/supply line with a breakaway feature and Full ABS Modulation, conforming to DOT specifications. System shall include all necessary tubing, glad hand connectors with weather tight covers, air reservoirs, emergency valve, drain cocks, automatic slack adjusters and glad hand protectors. PARKING BRAKES: Unit shall have a spring applied/air release braking system and shall be installed on both axles. WHEELS: Trailer shall have eight ( 8) each 215/75R x 17. 5 H tubeless radials mounted on steel wheels. DECKING: Minimum 2" hardwood deck lumber. TIE- DOWNS: Unit shall have minimum ten ( 10) D- Rings, four ( 4) each located on left and right sides of trailer, and two ( 2) each located at front. D- Rings to have a minimum 5/8" diameter cross- section. HITCH: Unit shall have four ( 4) position adjustable pintle hitch. JACK: Minimum 25, 000- pound 2 speed, crank style jack. SAFETY CHAINS: Two ( 2) high tensile safety chains with " diameter cross section and locking hooks shall be provided
Lot 2: Tongue/Drawbar - 6' Continuation of Mainframe - 3" Eye 4 Position One Piece Frame. Pintle Hitch Setting - 32" Adjustable. Landing Gear Twin - Two Speed - 50, 000 Lbs. Toolbox In Gooseneck - Tool Tray in Tongue/Gooseneck. Safety Chains - Standard. Main Deck - One Piece Main Frame 14" Wide X 26# A572 Grade 50 Steel High Tensile. Cross Members 6" IBeams X 3. 7 Lbs. Per Ft. Side Rails C8" X 11. 5 Lbs. Per Ft 1 1/2" Nominal Apitong Decking, Flat Deck Design with Beavertail and Ramp Off the Rear. Loaded Deck Height - 33". Deck Length - 24'. Deck Width - 8' 6" Wide. Main Deck Flooring - Covered 1 1/2" Nominal Apitong. Dovetail - 5' Self Cleaning - Double Break. Rear Loading Ramps - Spring Assisted 72" X 24" Lay Flat Self Cleaning. Axles - ( 3) 22, 500 Lb Capacity, Air Brakes, Auto Slack, ABS. Axle Spacing - 49". Suspension - Spring with Front Air Lift. Brakes - 12 1/4" X 7 1/2" Spring Brakes - 2 Axle. Tires - ( 12) 215/75R17. 5. Wheels - ( 12) Steel Disc Wheels. Electrical - Fully Sealed Wiring Harness with LED Lights, Marker Lights and Mid- Turn Signals, ( 3) Oval Stop, Tail and Turn Lights Per Side on Rear. Strobe - No Amber Strobes. Metal Prep - White Blasted and Cleaned Prior To Painting. Primer - PPG 2- Part Primer. Paint - 2- Part PPG Black Acrylic Urethane. Load Securement - 12 Bent D' Rings, 2 Extra Welded Front Top of Deck. Spare Tire and Mount - None. Sidestep - Drivers Side.
Lot 3: Additional deck length in 1' increments to trailer described in Commodity Lines 1 and 2.
Lot 4: Increase the axle to 25, 000 lbs. per axle in lieu of 20, 000 lbs. per axle of unit described in Commodity Lines 1 and 2. Cross members will be increased 6" and springs to be upgraded.
Lot 5: 25- foot deck plus 5- foot dovetail Pressure Treated Lumber Deck 95- 115 inches overall width Two heavy duty flip down ramps with spring assist GVWR of 22, 000# to 26, 000# Payload of 17, 000# to 22, 000# Tandem Dual axles with electric over hydraulic oil bath brakes Heavy Duty Jack/Landing Gear Heavy Duty Rub Rail Stake Pockets Pipe Chain Spools between Stake Pockets Break- A- Way System with Charger 2- Full Size Mounted Spare Tire & wheels Powder coated frame Features: - Front Tool Box - 12, 000lb Warn Winch Mounted in Front Tool Box - Large 12v Battery mounted in Front Tool Box - Two Under Mount Tool Boxes - Minimum of 24" of length - Mounted under trailer deck - Steps at the front of trailer on both sides - Handrails mounted to neck upright of trailer near steps - Mud Flaps - DOT Reflective Tape Electrical: - LED trailer lights including brake, turn signal, reverse, and side marker lights - 24- 48" LED Light bar mounted to neck backwards to light up trailer deck - 7- way round plug
Lot 6: Length: 25' flat with 5' dovetail; Width: 102" Dual Tandem ( 8 wheels) 2 Axles: Minimum 12, 000lb Oil Bath with Electric Brakes GVWR: At least 24, 900 pounds, not to exceed 26, 000lbs Mainframe & Neck: Minimum 12" x 19# I- Beam Minimum 25, 000lb coupler with 2- 5/16" ball Min. 3" Crossmembers 2 heavy duty Flip- over 5' dovetail ramps with spring assist Radial Tires, Min. 16", Load range E Safety steps on each side with handles Deck height
Dept Of Defense- Defense Logistics Agency- Dla Aviation- Dla Av Richmond- Dla Aviation
Chain, Stud Link, [ WSDC: EXN] End Item: Los Angeles Class SSN ( 688) PR: ****; NSN: ****- **** - This solicitation will contain one NSN for a Chain Stud Link, [ WSDC: EXN] End Item: FMS- KIDD CLASS DDG . The NSN and quantity are as follows: NSN ****- **** with a quantity of 90 SO. The requirement will contain a Contractor First
**** chain and wire rope chain and wire rope chain and wire rope, with attachments or terminations will be classified in this class when they are for general use. a. chain is a series of flexible links and or rings fitted into one another used for supporting, lifting, restraining, dragging, or transmitting power. b. wire rope is formed from strands of twisted wire. this solicitation will contain one nsn for a chain stud link, wsdc: exn end item: fms kidd class ddg . the nsn and quantity are as follows: nsn **** **** with a quantity of 90 so. the requirement will contain a contractor first article test fat of 01 unit at 45 days aro. the total production delivery schedule is 219 days aro, fob: origin inspection acceptance: origin. the final contract award decision may be based upon a combination of price, past performance, and other evaluation factors as described in the solicitation. the solicitation issue date is on or about april 29, 2025, in accordance with **** a 2 hubzone small business set aside
Bid Close Date:
Interior, Department Of The- Bureau Of Land Management- Colorado State Office
Hub Rings
Y-- BLM- CO SLVFO ZAPATA FALLS CAMPGROUND IMPROVEMENTS - BLM- CO SLVFO ZAPATA FALLS CAMPGROUND IMPROVEMENTS PHASE 1This amendment it to remove Southway Pit maps ( 2), change project location to North and East of Alamosa, attaching updated SOW and Bid Schedule, and to extend the period of performanc
Construction of other non- building facilities - BLM CO SLVFO Zapata Falls Campground Improvements Phase 1 furnishing labor, equipment, supplies, and materials, to convert existing day use picnic sites at zapata falls campground into full campgrounds with mostly back in parking spaces. work includes excavation and placement of earthen materials, placement of rock retention walls, demolition of existing day use areas, installation of tables and fire rings, installation of bear proof trash cans, scarifying existing disturbed areas, and importing and placing aggregate surfacing material.
Bid Close Date:
Interior, Department Of The- Bureau Of Land Management- Colorado State Office
Hub Rings
BLM- CO SLVFO ZAPATA FALLS CAMPGROUND IMPROVEMENTS - BLM- CO SLVFO ZAPATA FALLS CAMPGROUND IMPROVEMENTS PHASE 1This is a solicitation announcement for a campground expansion project located within the Bureau of Land Management Zapata Falls Recreation Site, located in Alamosa County, Colorado.
Construction of other non- building facilities - BLM CO SLVFO Zapata Falls Campground Improvements Phase 1 furnishing labor, equipment, supplies, and materials, to convert existing day use picnic sites at zapata falls campground into full campgrounds with mostly back in parking spaces. work includes excavation and placement of earthen materials, placement of rock retention walls, demolition of existing day use areas, installation of tables and fire rings, installation of bear proof trash cans, scarifying existing disturbed areas, and importing and placing aggregate surfacing material.
Bid Close Date:
Search government bids & RFPs
See also
Benefits of BidHits for government bidding
-
AI that understands your business
Expands your search so you don't miss relevant opportunities.
-
Email alerts, documents, and map view
Get opportunities by email; open bid documents or the official posting; view them on the map.
-
Advanced tools
Filter by region, method, and value; favorite items and add notes to organize opportunities.
For teams and integrations
Set it and forget it: enable government bid alerts in 3 steps
-
Choose the keywords
Add words related to your products or services. Our AI broadens the search so you don't miss opportunities.
-
Sign up and receive by email
Start the 14-day free trial and receive alerts with links to bid documents or the official posting.
-
Adjust if needed
Add or edit keywords, set regions, choose your email delivery schedule and email style. Map view available in the dashboard.
User testimonials
Practicality, speed, trust, and credibility—that’s what the work conveys. The information is precise and sharply targeted.
The system is very practical. It’s helped increase my monthly revenue.
I’m absolutely delighted with the system’s performance so far. This software has exceeded all my expectations, ensuring that no crucial keyword, such as “cathodic protection” and others related, goes unnoticed. Its precision and efficiency are remarkable, providing extra peace of mind in our operations. I’m truly impressed by its effectiveness.
I’ve used another platform before, and after discovering this one, I can see it’s much better. I find my bid opportunities faster, which speeds up my work.
Not only is the service excellent, but the support when I have questions is great too—the site has really impressed me.
I get exactly what I asked for—quickly, daily, and simply. The search arrives pre-filtered, so there’s no time wasted digging through countless websites, and it’s always up to date!
I don’t look for tenders—they find me!
Organized delivery of bids, easy to review.
I quickly find the bids that interest me.
Speed: ongoing bids are posted in a timely manner.
Easy to find the bids.
Service and support are excellent. Benefits: time savings and convenience.
Frequently asked questions
See how it works
Explore a term, enable AI email alerts, access bid documents or the official posting, and filter by region and method.