BidHits™ uses cookies to provide an individualized service and care for the privacy and protection of shared data.
By browsing this site, we understand that you agree to the terms of our Privacy Policy.
Water Based Fire Protection/ Fire Protection Inspection
H312-- Fire Alarm Maintenance Service Contract FY27 - NEW Base + Four - 583 - The Richard L Roudebush VA Medical Center has a requirement to inspect, maintain and provide minor repairs to both the electrical and mechanical portions of the fire alarm and suppression systems located in the main hospital building and several out-
Fire alarm and suppression systems inspection, testing, maintenance and minor repair services Base year and four option years of fire alarm testing and maintenance contract; inspection, testing, maintenance and minor repair of fire alarm, signaling and water based fire protection systems at Richard L Roudebush VA Medical Center and Cold Springs Road remote site
AI helper
Fire alarm and suppression systems inspection, testing, maintenance and minor repair at Richard L Roudebush VA Medical Center, Indianapolis, IN and Cold Springs Road site. Base year plus four option years. Quotes due by email to contract specialist by 10:00 EDT on 09/28/2026. Contractor must have 5 years experience, NICET certifications, comply with NFPA standards, submit reports, coordinate with site POC. Set aside for service-disabled veteran-owned small businesses.
Quotes must be received no later than the daytime specified in block 8: 10:00 EDT on 09/28/2026. quotes must be received no later than the daytime specified in block 8
Invoices shall be submitted electronically in accordance with VAAR clause **** shall be submitted electronically in accordance with vaar clause **** electronic submission of payment requests
The contractor warrants that items delivered are merchantable and fit for use. the contractor warrants and implies that the items delivered under this contract are merchantable and fit for use for the particular purpose described in this contract
Contractor must have minimum 5 years experience and NICET level III or higher certifications. have a minimum of five 5 years documented experience performing inspection, testing, maintenance, and repair services
Reports containing unexplained differences, blank results, duplicated devices, or devices without a final disposition may be rejected as incomplete. reports containing unexplained differences, blank results, duplicated devices, or devices without a final disposition may be rejected as incomplete
SEAL Pro D w/Productively Pack - Amendment 1 The purpose of this admendment is to extend RFQ closing time from 25 September 2026 **** PST to 25 September 2026 **** PST to allow for competition. Request for Quote ( RFQ): S
Wideformat production roll laminator system fully loaded configuration with turnkey delivery, installation, training, 3- year extended maintenance agreement, and deinstallation/disposal Wideformat production roll laminator 61 inch fully loaded configuration with infeed table, outfeed slitters, and multifan cooling array; baseline manufacturer warranty package ( 2- year parts, 1- year roller defect, 1- year labor); inside delivery, rigging, assembly, leveling, and factory calibration; comprehensive on- site operator technical staff training ( minimum 4 hours); 3- year extended maintenance agreement ( EMA) without roller protection; deinstallation, removal, and ecofriendly disposal of legacy laminator
AI helper
Procurement of a commercial-grade heavy-duty wideformat roll laminator (61-inch) fully loaded with infeed table, outfeed slitters, and multifan cooling array. Includes turnkey inside delivery, installation, training (min 4 hours for up to 6 operators), 3-year extended maintenance agreement, and deinstallation/disposal of legacy unit. 100% small business set-aside. Award based on comparative evaluation of technical capability, past performance, and price. Offers due 25 September 2026 at **** PST. Delivery to Edwards AFB.
Offers are due by 25 September 2026 at **** PST. The amendment states: extend rfq closing time from 25 september 2026 @**** pst to 25 september 2026 @**** pst to allow for competition.
The equipment must include a factory baseline warranty with 2 year parts, 1 year roller defect, and 1 year labor coverage plus a 3-year extended maintenance agreement.
The government will award based on best value using a comparative evaluation of technical capability, past performance, and price. The agency will rank quotations by price and evaluate the three lowest priced quotations for technical acceptability.
This acquisition is set aside for small business concerns. Offerors must demonstrate their proposed equipment meets or exceeds all stated requirements.
Offerors must submit specification sheet compliance crossreference and fully loaded configuration verification documentation. Failure to demonstrate compliance with all salient characteristics may result in technical unacceptability.
BID 2026- 65 Bear Creek Culvert and Molalla Ave Shoulders Project
Bear Creek Culvert and Molalla Ave Shoulders Project - highway construction culvert replacement, shoulder widening, drainage work, asphalt concrete pavement, aggregate base and shoulders, cold plane pavement removal, emulsified asphalt tack coat, longitudinal pavement markings, removal and reinstallation of existing signs, sign support footings, stormwater control ponds, seeding, planting, fences, mailbox supports, waterway enhancements, riprap protection, trench excavation bedding and backfill, video pipe inspection, sanitary storm culvert siphon and irrigation pipe, manholes catch basins and inlets, work on existing sewers and structures, trench resurfacing, concrete deck surface preparation, structure excavation and backfill, precast reinforced concrete members, rolled waterproofing membrane, reinforced concrete box culverts, cast- in- place concrete retaining walls, geosynthetic installation, clearing and grubbing, earthwork, removal of structures and obstructions, construction survey work, environmental
AI helper
Highway construction project in Clackamas County, Oregon, including culvert replacement, shoulder widening, and drainage work. Contract has two completion dates: June 30, 2027 for pump station work and September 15, 2027 for all other work. Full road closure allowed June 10 to September 2, 2027. In-water work restricted to July 15-September 15, 2027. Liquidated damages apply for lane closures beyond limits. Retainage of 5% from progress payments. Prevailing wage rates apply. Insurance required: $1M commercial general liability and $1M commercial auto liability. Claims process requires administrative exhaustion before litigation.
The contractor shall complete all work to be done under the contract, except for seeding establishment, not later than September 15, 2027. the contractor shall complete all work to be done under the contract, except for seeding establishment, not later than september 15, 2027.
Progress payments are made monthly based on estimates submitted by the contractor. Retainage of 5% is withheld from progress payments. the amount to be retained from progress payments will be 5. 0 of the value of payments made
The contract will be awarded to the responsible bidder submitting the lowest responsive bid. the county intends to award to the responsible bidder submitting lowest responsive bid.
Bidders must be prequalified through ODOT. to gain prequalification of bidders through odot
Liquidated damages of $500 per 15 minutes per lane for lane closures beyond specified limits. the contractor shall pay to the agency, not as a penalty, but as liquidated damages, 500 per 15 minutes, or for a portion of 15 minutes, per lane
Claims must be properly submitted and follow a review process. Litigation must commence within one year following mailing of the decision. the contractor shall commence any suit or action to collect or enforce any claim filed in accordance with **** within a period of one (1) year following the mailing of the decision
Failure to submit required documents or comply with bidding requirements may result in rejection of bids. rejection of nonresponsive bids
Hazardous waste removal at lsbs - hazardous waste removal at lsbs
Hazardous waste removal services Commercial services to provide all plant, equipment, labor, supervision, and materials necessary to provide hazardous waste collection services, including waste characterization, supplies and packaging, labeling and documentation, technical support, licenses and permits, insurance, and disposition. The materials are distributed among three general areas: the warehouse mezzanine, the warehouse main floor, and in cold storage. Approximately 417 gallons of hazardous waste are anticipated.
AI helper
This Request for Quotation (RFQ) seeks quotations for hazardous waste collection services at the USGS Great Lakes Science Center. Services include waste characterization, pickup, transportation, labeling, and disposal. The contractor must have trained and certified disposal technicians and maintain required insurance. Quotations must be submitted via email by 12:00 pm mountain time on September 22, 2026. The award will be made to the lowest priced, technically acceptable offeror. Performance period is from 09/24/2026 to 09/23/2027.
The performance period is from 09/24/2026 to 09/23/2027.
Invoices must include the purchase order number, item description of each service, quantity of each service, and cost of each service.
Award will be made to the lowest priced, technically acceptable offeror.
Contractors must possess and maintain all statutory required vehicular insurances, workmans compensation insurance, general liability insurance, and premises insurances.
LOP Fire Protection and Unwatering Pump System - 08/20/2026: Please see attached solicitation. 09/03/2026: Please see attached amendment 1 and conformed amendment 1. 09/04/2026: Please see attached amendment 2. 09/11/2
fire protection and unwatering pump system Vertical pump motor assembly ( 650 gpm at 200 feet head water, 50hp nominal); Water pressure maintenance system jockey pump system ( 0. 25 hp, 90 psi); Fire pump controller panel; Manual transfer switch; Overload protection for an existing 125a breaker; 10 inch dia sch 40 carbon steel pipe; 10 inch dia slip joint dresser coupling; 10 inch dia sch 40 carbon steel slipon, raised face flanges; 10 inch dia sch 40 carbon steel 90 elbow short radius flanged end; 10 inch dia sch 40 carbon steel 45 elbow short radius flanged end; 10 inch dia sch 40 carbon steel tee flanged end; 10 inch dia sch 40 carbon steel gate valve, flanged end; 10 inch dia sch 40 carbon steel threeway valve; 10 inch dia pressure relief valve ( 100 psi service point); Flange gaskets raised face for 10 inch flanges; Flange bolts for 10 inch flanges; Flange nuts for 10 inch flanges; Flange washers for 10 inch flanges; 6 inch 150 psi capable pressure regulating valve; 6 inch dia sch 40 carbon steel gate va
AI helper
This solicitation is for a fire protection and unwatering pump system for the Lookout Point Powerhouse in Lane County, Oregon. All equipment must be new and meet or exceed specified requirements. Deliveries must be made on or before March 1, 2027. The contract is set aside for small businesses (WOSB, SDVOSB). Detailed technical specifications are provided for various pumps, valves, piping, and related components. Contractor must provide descriptive data, cutsheets, and test results before shipment.
Delivery must be on or before March 1, 2027. delivery on or before delivery date 01 mar 2027
The contractor shall effectuate the assignment to the government all applicable standard manufacturer warranties for each component and packaged system furnished under this contract. the contractor shall effectuate the assignment to the government all applicable standard manufacturer warranties
Failure to submit the safety data sheet prior to award may result in the apparently successful offeror being considered nonresponsible and ineligible for award. failure to submit thesafety data sheet prior to award may result in the apparently successful offeror beingconsidered nonresponsible and ineligible for award.
Add keywords for your products or services. Smart Search helps catch related opportunities beyond exact matches.
2
Start the trial and receive alerts
Use the 14-day free trial and get email alerts with documents or official posting links.
3
Tune your feed
Adjust keywords, regions, email schedule and email style. Use map view and filters when you want to explore.
What our users say
They deliver on their promises. The information is simple and straightforward.
G. G
The tool is truly effective at scanning bid documents, efficiently delivering bids.
G. D. Reis
They provide information on a wide and varied range of purchasing processes. All the necessary details are also included.
J. M. Defelitto
I receive the bids in a timely and proper manner.
R. Rama
All bids related to our product are captured by you and sent to us. In my opinion, it’s perfect—broad coverage and easy searches across the bid documents.
We selected the most helpful reviews from real users. Order may change periodically.
Very good and accurate information about the tenders: consistent and precise.
G. R. Ortiz
Excellent information. Just what I was looking for.
L. H. Borrelli
The platform is very user-friendly.
N. Lobato
I consistently received notifications about bids within the specific segment I chose to monitor. The system simplifies processes that used to be complex, offering a navigation experience that is easy, fast, and modern.
G. P. da S. E. Guimaraes
I like the way they provide information with the greatest possible accuracy. I love that.
M. A. Neil
I closed deals thanks to the information gathered by the search tool. There’s no need to research across multiple media outlets.
J. Comunale
You see a lot of tenders; you get emails with the alerts.
M. Camarasa
I liked the way they search for bids and provide us with the link to view them.
C. J. P. Perez
It’s easy to stay connected to bids across multiple municipalities at the same time. Bids are easy to view.
A. P. e S. L. Epp
The search engine that finds what I'm looking for just by entering keywords
J. P. L. Construccion
It encompasses all portals in one place.
G. Ferrea
Efficiency in search times.
R. Chavez
The idea of ​​using a keyword and sending the information by email is very good.
BidHits is a government bid search engine that monitors official portals and brings relevant federal, state and local opportunities into one place. You can search on the site and receive scheduled email alerts.
Enter your email and activate the trial. For 14 days you can use the main features, including alerts and access to results. When it ends, if you do not subscribe at /subscription.php, the bid list becomes limited and you will not be charged automatically.
1) Add keywords that describe what you sell. 2) Start the trial. 3) Adjust regions, delivery times and email style after signup.
Whenever possible, yes. Some official portals require login or block direct links; in those cases we point you to the official process page so you can download the documents.
Yes. You can filter by region, procurement method, dates and value ranges. You can also save preferences for future alerts and searches.
Yes. In the dashboard you can see bids on a map and use it to plan follow-up by location.
It can happen. Smart Search uses your keywords to find related opportunities, not only exact matches. Add specific terms and remove off-topic results to improve future alerts.
Yes. You can query bids via API. Documentation at /api_integration.php. Ideal for CRM, BI and automations.
In Settings you can pause alerts or adjust delivery times. If you want to delete your account, just contact us. During the free trial there is no auto-charge.
We monitor major official sources every day at the federal, state and local levels. New bid notices are added as soon as they are captured from the source portal.
Plans start at $ 43.00 per month, with options for different business needs and billing terms. Start with a free trial and evaluate the results before subscribing, with no automatic billing.
Add what you sell, get scheduled alerts, open documents or the official page, and use filters by region and method.
Transcript
Welcome to BidHits.
Finding public tenders and bids is important. But what really matters is quickly identifying the opportunities that match what your company sells.
To get started, enter a few keywords that describe your products or services. BidHits shows relevant opportunities, highlights your keywords, and organizes everything by date.
Smart search is already enabled and uses artificial intelligence to expand your results, even when the tender uses different words from the ones you searched for.
For each opportunity, you can view a summary, access documents, mark it as a favorite, add private notes, remove what is not relevant, or view it on the map.
You can also use filters, run searches, and explore the day's opportunities directly on the map.
Start using BidHits now. It's fast, practical, and you can try it for free.
AI Assistant
Ask me about the bid...
Loading summary...
Methodology
Unaided survey with 1102 active users, conducted through 10/07/2026.
Single question: "Would you recommend our services to a friend or colleague?" - 90% answered "yes".
™
