Latest US Outdoor Brands Contracts & Bids

The Office of State Procurement in Louisiana is requesting bids for rebid electrical equipment. Bidders must be registered in the lagov system. The bid opening is online on **** at 9:45 AM CST via Zoom. All bids must be submitted online via the vendor portal. The bid includes detailed specifications for various electrical equipment, including quantities, types, models, and brands. The state reserves the right to reject individual line items from the award. Bidders must include a W9 form if newly registered. All attachments must be printed and reviewed. Payment is due within 30 days of invoice or delivery. Bidders must comply with all applicable Louisiana laws and regulations, including civil rights laws and accessibility requirements. The state may terminate the contract for cause or convenience. The order of priority is special terms and conditions, followed by standard conditions, and then instructions to bidders. All bid amounts must be in US dollars.

This RFI seeks information from vendors about professional-level marching brass instruments, excluding Yamaha products. Interested vendors are encouraged to submit product specifications, performance data, brochures, and certifications. This RFI is for informational and planning purposes only and does not constitute a solicitation or obligation on the part of the government.

Lot 1: - DuMor # 502- 32TX- BT Exterior Trash cans- OR APPROVED EQUAL- SPECIFICATIONS: - Trash cans should have a receptacle body and cover. - The liner should have at least a thirty- two ( 32)- gallon capacity. - Expansion anchors should be provided. - All products must be 100% BLEACH cleanable to reduce the spread of infectious diseases. - Materials that needs to be used for the outdoor furniture is as follows: wood- grain recycled plastic slats, steel tubing, steel sheets, stainless steel, cast aluminum, steel plate, carbon steel flat bars, and steel expansion anchors. - All finished powder- coated parts should comply with the following ASTM methods for coating and coating method: ASTM- D- 523, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- B- 117, and ASSTM- D- ****- Minimum twenty ( 20)- year limited warranty on structural failure of frame, a ten ( 10)- year limited warranty on structural failure of recycled plastic, a five ( 5) year limited warranty against finish failure on all powder- coated products, and a one ( 1)- year limited warranty on all other items. SHIPPING IS TO BE INCLUDED IN BID OFFER. Bidders who propose alternate brands/specifications should enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non- responsive bid. If the brands are not changed, the contract will be written accordingly and the successful bidder shall be required to deliver the brand/specification stated in the solicitation.
Lot 2: - DuMor # 505- 60TX OUTDOOR BENCHES- OR APPROVED EQUAL- SPECIFICATIONS: - The seat height for outdoor benches should be approximately eighteen ( 18) inches. - Benches should be approximately seventy- five ( 75) inches wide, twenty- six ( 26) inches deep, and thirty- five ( 35) inches in height. - Benches should bear a weight capacity of seven hundred fifty ( 750) pounds. - All products must be 100% BLEACH cleanable to reduce the spread of infectious diseases. - Materials that needs to be used for the outdoor furniture is as follows: wood- grain recycled plastic slats, steel tubing, steel sheets, stainless steel, cast aluminum, steel plate, carbon steel flat bars, and steel expansion anchors. - All finished powder- coated parts should comply with the following ASTM methods for coating and coating method: ASTM- D- 523, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- B- 117, and ASSTM- D- ****- Minimum twenty ( 20)- year limited warranty on structural failure of frame, a ten ( 10)- year limited warranty on structural failure of recycled plastic, a five ( 5) year limited warranty against finish failure on all powder- coated products, and a one ( 1)- year limited warranty on all other items. SHIPPING IS TO BE INCLUDED IN BID OFFER. Bidders who propose alternate brands/specifications should enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non- responsive bid. If the brands are not changed, the contract will be written accordingly and the successful bidder shall be required to deliver the brand/specification stated in the solicitation.
Lot 3: - DuMor # 481- 20TX OUTDOOR CHAIRS- OR APPROVED EQUAL- SPECIFICATIONS: - The seat height for outdoor chairs should be approximately seventeen ( 17) inches. - The chairs should be approximately twenty- seven ( 27) inches wide and twenty- five ( 25) inches deep. - Chairs should bear a weight capacity of three hundred fifty ( 350) pounds. - All products must be 100% BLEACH cleanable to reduce the spread of infectious diseases. - Materials that needs to be used for the outdoor furniture is as follows: wood- grain recycled plastic slats, steel tubing, steel sheets, stainless steel, cast aluminum, steel plate, carbon steel flat bars, and steel expansion anchors. - All finished powder- coated parts should comply with the following ASTM methods for coating and coating method: ASTM- D- 523, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- B- 117, and ASSTM- D- ****- Minimum twenty ( 20)- year limited warranty on structural failure of frame, a ten ( 10)- year limited warranty on structural failure of recycled plastic, a five ( 5) year limited warranty against finish failure on all powder- coated products, and a one ( 1)- year limited warranty on all other items. SHIPPING IS TO BE INCLUDED IN BID OFFER. Bidders who propose alternate brands/specifications should enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non- responsive bid. If the brands are not changed, the contract will be written accordingly and the successful bidder shall be required to deliver the brand/specification stated in the solicitation.
Lot 4: - DuMor # 6B- 519TX- UMB OUTDOOR TABLES- OR APPROVED EQUAL- SPECIFICATIONS: - Outdoor tables should be approximately forty- eight ( 48) inches in diameter and thirty ( 30) inches in height. - Tables should have an umbrella hole in the center. - Expansion anchors should be provided. - All products must be 100% BLEACH cleanable to reduce the spread of infectious diseases. - Materials that needs to be used for the outdoor furniture is as follows: wood- grain recycled plastic slats, steel tubing, steel sheets, stainless steel, cast aluminum, steel plate, carbon steel flat bars, and steel expansion anchors. - All finished powder- coated parts should comply with the following ASTM methods for coating and coating method: ASTM- D- 523, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- B- 117, and ASSTM- D- ****- Minimum twenty ( 20)- year limited warranty on structural failure of frame, a ten ( 10)- year limited warranty on structural failure of recycled plastic, a five ( 5) year limited warranty against finish failure on all powder- coated products, and a one ( 1)- year limited warranty on all other items. SHIPPING IS TO BE INCLUDED IN BID OFFER. Bidders who propose alternate brands/specifications should enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non- responsive bid. If the brands are not changed, the contract will be written accordingly and the successful bidder shall be required to deliver the brand/specification stated in the solicitation.
Lot 5: - DuMor # 441- **** OUTDOOR PLANTERS- OR APPROVED EQUAL- SPECIFICATIONS: - Outdoor planters should be approximately twenty ( 20) to thirty ( 30) inches in height. - Expansion anchors should be provided. - All products must be 100% BLEACH cleanable to reduce the spread of infectious diseases. - Materials that needs to be used for the outdoor furniture is as follows: wood- grain recycled plastic slats, steel tubing, steel sheets, stainless steel, cast aluminum, steel plate, carbon steel flat bars, and steel expansion anchors. - All finished powder- coated parts should comply with the following ASTM methods for coating and coating method: ASTM- D- 523, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- B- 117, and ASSTM- D- ****- Minimum twenty ( 20)- year limited warranty on structural failure of frame, a ten ( 10)- year limited warranty on structural failure of recycled plastic, a five ( 5) year limited warranty against finish failure on all powder- coated products, and a one ( 1)- year limited warranty on all other items. SHIPPING IS TO BE INCLUDED IN BID OFFER. Bidders who propose alternate brands/specifications should enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non- responsive bid. If the brands are not changed, the contract will be written accordingly and the successful bidder shall be required to deliver the brand/specification stated in the solicitation.