Empire State Purchasing Group
Silicone- White Lightning ****, Clear 100% Silicone Rubber All Purpose Seal
Bid Close Date:
Silicone Government Bids & RFPs
AI email alerts, regional filters, and access to bid documents
Our AI understands your business and finds more opportunities. - 14-day free trial - no auto-charge.
90% recommend BidHits (1029 real users, 04/03/2026).
Methodology
Commonwealth Of Kentucky - Transportation - Office Of The Secretary- KY
Silicone
Two Part Silicone Sealant
Bid Close Date:
Lot 1: Two Part Rapid Cure Silicone Sealant. This should come as a kit of two 20oz sausage cartridges ( part A and part B) that work with the CBA- 600 dual sauage pneumatic gun. This product should be Dow Corning 902 RCS and conform to the Kentucky 2026 Standard Specification for Road and Bridge Specifications section ****( B). ************************************************** *** ONLY ONLINE BIDS WILL BE ACCEPTED FOR THIS RFB. *** Emailed and hard copies delivered by any method WILL NOT BE ACCEPTED. See attached document How to Respond to an Online Bid through the Kentucky Vendor Self Service site ( updated). pdf. Please enter contact person, phone number and email in the Comments Section. Vendors should review and update, if necessary, all addresses and contact persons for their account prior to bid submission. This information will carry forward to a contract if awarded, therefore please ensure all information is correct.
Lot 2: Self Leveling Silicone Sealant. This product should be packed as a 29 oz. cartridge to be used in a standard caulking gun. This product should be Dow Corning 890 and conform to the Kentucky 2026 Standard Specifications section ****( A).
Lot 3: Non- Self Leveling Silicone Sealant. This product should be packaged as a 29 oz. or 857 ml. cartridge to be used in a standard caulking gun. This product should be Dow Corning 888 and should be compatible with the Dow Corning 902 RCS.
Lot 4: Rapid Cure Silicone Primer Carboguard 635. This product should be packaged as a two- component gallon kit consisting of 0. 8 gallons of part A and 0. 2 gallons of part B. This product should be Carboline' s Carboguard 635. This product must be an all- purpose, immersion- grade epoxy for use on metals.
Lot 5: Dual Sausage Pneumatic Gun ( 600HPS). This equipment is used to apply the two part ( parts A & B) 20 oz. sausage cartridges that make up the silicone sealant. The model should be the Cox CBA- 600S which must be able to dispense dual component compounds requiring 1: 1 mix ratio to application.
Lot 6: Polymer Nosing System ( 1 gallon bottle, 1 bag aggregate). This should be a two- component rapid curing liquid polymer. The material is used to form the edge of broken concrete and provide a surface for the two- part silicone sealant to adhere. This material must cure to a dense, semi- flexible polymer that is resistant to chemicals, weather, abrasion, and impact. This should be Silspec 900 Polymer Nosing System. This is sold to repair 0. 5 cubic feet and comes as a kit consisting of a 1- gallon bottle of polymer liquid and 1 bag of Silspec blended aggregate.
Lot 8: Foam Backer Rod ( 2 1/2" diameter). This material is needed to support the two- part silicone sealant in the expansion joint until the sealant cures. This foam backer rod must be 2 1/2 inches in diameter and sold either in rolls or standard lengths.
Lot 9: Foam Backer Rod ( 2" diameter). This material is needed to support the two- part silicone sealant in the expansion joint until the sealant cures. This foam backer rod must be 2 inches in diameter and sold either in rolls or standard lengths.
Lot 10: Foam Backer Rod ( 1 1/2" diameter). This material is needed to support the two- part silicone sealant in the expansion joint until the sealant cures. This foam backer rod must be 1 1/2 inches in diameter and sold either in rolls or standard lengths.
Lot 11: Foam Backer Rod ( 1" diameter). This material is needed to support the two- part silicone sealant in the expansion joint until the sealant cures. This foam backer rod must be 1 inch in diameter and sold either in rolls or standard lengths.
Lot 1: Two Part Rapid Cure Silicone Sealant. This should come as a kit of two 20oz sausage cartridges ( part A and part B) that work with the CBA- 600 dual sauage pneumatic gun. This product should be Dow Corning 902 RCS and conform to the Kentucky 2026 Standard Specification for Road and Bridge Specifications section ****( B). ************************************************** *** ONLY ONLINE BIDS WILL BE ACCEPTED FOR THIS RFB. *** Emailed and hard copies delivered by any method WILL NOT BE ACCEPTED. See attached document How to Respond to an Online Bid through the Kentucky Vendor Self Service site ( updated). pdf. Please enter contact person, phone number and email in the Comments Section. Vendors should review and update, if necessary, all addresses and contact persons for their account prior to bid submission. This information will carry forward to a contract if awarded, therefore please ensure all information is correct.
Lot 2: Self Leveling Silicone Sealant. This product should be packed as a 29 oz. cartridge to be used in a standard caulking gun. This product should be Dow Corning 890 and conform to the Kentucky 2026 Standard Specifications section ****( A).
Lot 3: Non- Self Leveling Silicone Sealant. This product should be packaged as a 29 oz. or 857 ml. cartridge to be used in a standard caulking gun. This product should be Dow Corning 888 and should be compatible with the Dow Corning 902 RCS.
Lot 4: Rapid Cure Silicone Primer Carboguard 635. This product should be packaged as a two- component gallon kit consisting of 0. 8 gallons of part A and 0. 2 gallons of part B. This product should be Carboline' s Carboguard 635. This product must be an all- purpose, immersion- grade epoxy for use on metals.
Lot 5: Dual Sausage Pneumatic Gun ( 600HPS). This equipment is used to apply the two part ( parts A & B) 20 oz. sausage cartridges that make up the silicone sealant. The model should be the Cox CBA- 600S which must be able to dispense dual component compounds requiring 1: 1 mix ratio to application.
Lot 6: Polymer Nosing System ( 1 gallon bottle, 1 bag aggregate). This should be a two- component rapid curing liquid polymer. The material is used to form the edge of broken concrete and provide a surface for the two- part silicone sealant to adhere. This material must cure to a dense, semi- flexible polymer that is resistant to chemicals, weather, abrasion, and impact. This should be Silspec 900 Polymer Nosing System. This is sold to repair 0. 5 cubic feet and comes as a kit consisting of a 1- gallon bottle of polymer liquid and 1 bag of Silspec blended aggregate.
Lot 7: 7/8" Mixing Nozzle for Pneumatic gun. This nozzle must fit on the Cox CBA- 600S Dual Sausage Pneumatic Gun. This nozzle is for one time use and then is disposed.
Lot 8: Foam Backer Rod ( 2 1/2" diameter). This material is needed to support the two- part silicone sealant in the expansion joint until the sealant cures. This foam backer rod must be 2 1/2 inches in diameter and sold either in rolls or standard lengths.
Lot 9: Foam Backer Rod ( 2" diameter). This material is needed to support the two- part silicone sealant in the expansion joint until the sealant cures. This foam backer rod must be 2 inches in diameter and sold either in rolls or standard lengths.
Lot 10: Foam Backer Rod ( 1 1/2" diameter). This material is needed to support the two- part silicone sealant in the expansion joint until the sealant cures. This foam backer rod must be 1 1/2 inches in diameter and sold either in rolls or standard lengths.
Lot 11: Foam Backer Rod ( 1" diameter). This material is needed to support the two- part silicone sealant in the expansion joint until the sealant cures. This foam backer rod must be 1 inch in diameter and sold either in rolls or standard lengths.
Penna Turnpike - The Pennsylvania Turnpike Commission - PA
Silicone Spray
Hrdwr/elect sply d1 stor 03/24/2026
Bid Close Date:
Lot 3: Silicone spray electrical only 10 oz
Lot 1: Cartridge hilti green power level light
Lot 2: Surge protector 10ka 320v waterproof
Lot 3: Silicone spray electrical only 10 oz
Dept Of Defense- Dept Of The Navy- Navsea- Navsea Shipyard- Norfolk Naval Shipyard Gf
Siliconeacrylic Double Coated Adhesive
Film Tape - This is a Solicitation for four ( 4) rolls of TAPE, FILM, P/N 3M **** ( 18& quot; wide x108 yd). This item is manufactured by 3M Company in support of the Norfolk Naval Shipyard ( NNSY), Portsmouth, VA. This requirement will be procured as
solicitationcontractorder for commercial products and commercial services film tape, siliconeacrylic double coated adhesive, faceside adhesive type 350, thk: **** backside adhesive type silicone adhesive carrier type: pet polyester, thk: **** backside liner: clear pet, 18 wide x 108 yd 3m pn **** **** faceside liner: tan, polycoated kraft, no print, 4 each shelf life 12 months material must be provided with at least 85 of shelf life remaining mercury free clause invoked certificate of compliance clause invoked pricing arrangement: firm fixed price
Bid Close Date:
More results available
Activate the free trial to see all results and access bid documents.
Search government bids & RFPs
Benefits of BidHits for government bidding
-
AI that understands your business
Expands your search so you don't miss relevant opportunities.
-
Email alerts, documents, and map view
Get opportunities by email; open bid documents or the official posting; view them on the map.
-
Advanced tools
Filter by region, method, and value; favorite items and add notes to organize opportunities.
For teams and integrations
Integrate bids into your system via the Bid API and receive data in JSON or XML.
Set it and forget it: enable government bid alerts in 3 steps
-
Choose the keywords
Add words related to your products or services. Our AI broadens the search so you don't miss opportunities.
-
Sign up and receive by email
Start the 14-day free trial and receive alerts with links to bid documents or the official posting.
-
Adjust if needed
Add or edit keywords, set regions, choose your email delivery schedule and email style. Map view available in the dashboard.
User testimonials
We selected the most helpful reviews from real users. Order may change periodically.
The tool is truly effective at scanning bid documents, efficiently delivering bids.
The search engine that finds what I'm looking for just by entering keywords
It encompasses all portals in one place.
It’s one of the best platforms for searching bids.
Efficiency in search times.
It’s easy to stay connected to bids across multiple municipalities at the same time. Bids are easy to view.
The platform is very user-friendly.
I get exactly what I asked for—quickly, daily, and simply. The search arrives pre-filtered, so there’s no time wasted digging through countless websites, and it’s always up to date!
Excellent platform to help promote and expand the reach of your work.
I am very satisfied; it's a very useful tool.
With the chosen keywords, I can find many bids of interest! I learn about new notices well in advance, giving me enough time to get organized to participate.
It helps me identify areas of opportunity and find bids related to my work area.
Frequently asked questions
BidHits is a public bid search engine. We map official portals daily and deliver results on the site and by email. Our AI understands your business so you don't miss opportunities.
Just enter your email and activate the trial. For 14 days you can use all features. When it ends, if you don't subscribe at /subscription.php, the bid list becomes limited and you won't be charged automatically.
1) Choose keywords (your products or services). 2) Activate the trial and start receiving. After signup you can adjust regions, times, and email style on the settings page.
Whenever possible, yes. Some official portals require login or block direct links; in those cases we point you to the official process page so you can download the documents.
Yes. In the bids panel you can filter by region, procurement method, dates, and value ranges. In settings you can save preferences for future alerts and searches.
Yes. After signup you can switch to the map in the panel and see bids by location.
AI can make mistakes. It's trained to understand your business based on the keywords you add. Refine by adding specific terms, modifying or deleting those that produce off-topic results. That trains your feed and improves future alerts.
Yes. You can query contracts via API. Documentation at /api_integration.php. Ideal for CRM, BI and automations.
In Settings you can pause alerts or adjust delivery times. If you want to delete your account, just contact us. During the free trial there's no auto-charge.
We monitor major official portals every day at the federal, state, and local levels. Bid notices are added to the system as soon as they are published on the source portal.
Plans start at $ 43.00/month. Start with the free trial--no auto-charge.
See how it works
Start free trial
Explore a term, enable AI email alerts, access bid documents or the official posting, and filter by region and method.
Transcript
Welcome to BidHits. Start by adding a few key words. Just type what you sell.
That's it. You're now ready to explore government contract opportunities made for you. Your bidding dashboard shows the latest tenders organized by date and matched to your keywords.
To help you spot the most relevant ones, your keywords are automatically highlighted in yellow.
And here's the best part. Our AI is always working behind the scenes to bring you even more opportunities.
Smart Search is already on, enhancing your results beyond exact matches. You don't have to do a thing.
Each tender card comes with useful tools. You can view a summary, open documents, favorite tenders, write private notes, remove what doesn't fit, or check the location on the map.
You can also see all tenders from the same day in a single map view. Perfect for planning your next steps. Use the search bar, apply filters, and explore with ease.
Try BidHits now. It's fast, smart, and free to get started.
AI Assistant
Ask me about the bid...
Loading summary...