Line Break Government Bids & RFPs

Lot 1: TRACK HOE, HYDRAULIC, CRAWLER MOUNTED, DIESEL POWERED W/OPERATOR TO MEET THE FOLLOWING SPECIFICATIONS: BOOM LENGTH OF 25 FT MIN, MINIMUM 145 HP OR GREATER, 1. 5 CY BUCKET MIN, 42 INCHES WIDE TOOTHED ROCK BUCKET, MIN GROUND OPERATING WEIGHT OF 46, 000 LBS. EXCAVATOR SHALL HAVE HYDRAULIC THUMB ATTACHMENT OR A GRAPPLE ATTACHMENT AVAILABLE FOR USE. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________ ONLY ONLINE BIDS WILL BE ACCEPTED FOR THIS RFB. Emailed and hard copies delivered by any method WILL NOT BE ACCEPTED. See attached document How to Respond to an Online Bid through the Kentucky Vendor Self Service site ( updated). pdf. Please enter contact person, phone number and email in the Comments Section. Vendors should review and update, if necessary, all addresses and contact persons for their account prior to bid submission. This information will carry forward to a contract if awarded, therefore please ensure all information is correct.

Lot 2: TRACK HOE, HYDRAULIC, CRAWLER MOUNTED, DIESEL POWERED W/OPERATOR TO MEET THE FOLLOWING MIN SPECIFICATIONS: LONG REACH BOOM 50 FT AND BUCKET SIZE 1 CY, 140 HP, GROUND OPERATING WEIGHT OF 48, 000 LBS. EXCAVATOR SHALL HAVE HYDRAULIC THUMB ATTACHMENT OR A GRAPPLE ATTACHMENT AVAILABLE FOR USE. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 3: SHALL BE COMPATIBLE WITH LINE ITEM # 1. MINIMUM 4, 000 FT- LBS ( ENERGY CLASS) TO BE USED ON TRACK EXCAVATOR WITH 25' BOOM, MIN GROUND WEIGHT OF 46, 000 LBS OR GRATER AND MIN OF 145 HP OR GREATER. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 4: MIN 300 FT- LBS ( ENERGY CLASS) TO BE USED ON HIGH FLOW HYDRAULIC SKID STEER OR LONG REACH 50 FT MINIMUM EXCAVATOR. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 5: MULCHING HEAD WITH A MIN OF 24" CUTTING WIDTH. ATTACHMENT SHALL ALSO INCLUDE 90 DEGREE TILT MOUNT. TO BE USED ON TRACK EXCAVATOR 25' BOOM, MIN OF 145 HP AND 46, 000 LB MIN WEIGHT. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 6: MULCHING HEAD WITH A MINIMUM OF 36" CUTTING WIDTH. ATTACHMENT SHALL ALSO INCLUDE 90 DEGREE TILT MOUNT. TO BE USED ON TRACK EXCAVATOR 25' AND 50' BOOM LENGTH. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 7: TRUCK RENTAL W/OPERATOR, FOR ON HIGHWAY USE, TANDEM WITH 350 HP MINIMUM, WITH MINIMUM 16 FOOT BED. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 8: ARTICULATED TRUCK RENTAL W/OPERATOR , 25 TON OR GREATER 4 X 4 Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 9: 60 HP MIN DIESEL ENGINE, EQUIPPED WITH ANGLE/TILT AND CORNER CUTTING BLADE. 15, 000 LB MINIMUM OPERATING WEIGHT W/OPERATOR. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 10: 140 HP OR GREATER DIESEL ENGINE, EQUIPPED WITH ANGLE/TILT AND CORNER BLADE. 33, 000 LB MINIMUM OPERATING WEIGHT W/OPERATOR. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 11: OUTPUT OF MINIMAL 6 KW @60HZ WITH A HEIGHT OF 12 TO 30 FT, 4 LIGHTS PER UNIT. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 12: TRACKED SKID STEER MIN OF 70 HP WITH HIGH FLOW HYDRAULIC SYSTEM TO OPERATE SPECIAL ATTACHMENTS. SKID STEER WILL INCLUDE THE FOLLOWING BASIC ATTACHMENTS; BUCKET, HEAVY DUTY FORKS, SCRAP GRAPPLE BUCKET. THE FOLLOWING TWO ITEMS ARE HYDRAULIC FLOW SKIED STEER ATTACHMENTS THAT WILL BE PAID BY THE HOUR IN ADDITION TO SKID STEER/OPERATOR WHEN USED: 24 AND 40 INCH COLD PLANER ( MILLING HEAD) Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 13: CAPABLE OF WORKING WITH HIGH FLOW HYDRAULIC SKID STEER, MIN 70 HP. HIGH FLOW TYPE W/HYDRAULIC SIDE SHIFT. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 14: CAPABLE OF WORKING WITH HIGH FLOW HYDRAULIC SKID STEER 70 HP. HIGH FLOW TYPE W/HYDRAULIC SIDE SHIFT. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 15: CAPABLE OF WORKING WITH HIGH FLOW HYDRAULIC SKID STEER MIN 70 HP. HYDRAULIC- DRIVEN CONVEYOR HEAVY DUTY WITH 10" HEAD AND TAIL PULLEYS AND VARIABLE SPEED, RIGHT OR LEFT SIDE DISCHARGE WITH HYDRAULIC WIDTH/HEIGHT ADJUSTMENT. ADJUSTABLE SHOULDERING ANGLE AND SHOULDER WIDTHS OF 1- 3. 5', WEIGHT ( EMPTY) **** LBS. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 16: 125 HP MINIMUM WITH 84" SMOOTH DRUM AND ATTACHABLE SHEEP FOOT DRUM PAD. 10 TON MINIMUM OPERATING WEIGHT. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 17: 140 HP MINIMUM, 40 INCH WIDE DRUM CAPABLE TO MILL 12 INCHES IN DEPTH, MOUNTED ON MINIMUM 22, 000 LB RUBBER TIRED LOADER. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 18: ARTICULATED WHEEL LOADER W/OPERATOR A MINIMUM 150 HP AND 3. 5 CU YD MIN BUCKET CAPACITY. 18, 000 LB MINIMUM GROUND WEIGHT. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 19: PROVIDE FLAGGERS AND TRAFFIC CONTROL FOR MAINTENANCE OPERATIONS ON STREETS AND ROADS. PRICE PER MANHOUR INCLUDES FLAGGERS, WARNING SIGNS, FLAGGERS PADDLES, PPE, AND SET UP IN ACCORDANCE WITH KYTC STANDARD DRAWINGS. PRICE PER MANHOUR IS FOR EACH FLAGGER USED. VENDOR SHALL PROVIDE UP TO 6 FLAGGERS ( IF NEEDED) Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 20: OPERATING WEIGHT 63, 000 LBS MINIMUM, NET POWER 180 HP MIN, DIESEL POWERED, 30 METRIC TON MIN CLASS EXCAVATOR, EQUIPPED WITH UP TO 48" WIDE CY BUCKET WITH TEETH. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 21: SHALL BE COMPATIBLE WITH TRACK EXCAVATOR 25 FT BOOM, MIN 180 HP 63, 000 LB MIN WEIGHT. MIN 8, 000 FT- LBS ( ENERGY CLASS) Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 22: CAPABLE OF WORKING WITH HIGH FLOW HYDRAULIC SKID STEER, QUICK ATTACH, MINIMUM 6 FOOT CUT & 7 FT LONG. MIN 70 HP. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 23: IMPACT FREQUENCY RANGE 700- ****, OPERATING RANGE ****- **** PSI. COMPATIBLE WITH SKID STEER WITH HIGH FLOW HYDRAULICS MIN 70 HP. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 24: MINIMUM 12 FT BLADE MIN 130 HP, 29, 000 LB OPER WEIGHT Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 25: MUST BE 4 WHEEL DRIVE EQUIPPED WITH FLASHING SAFETY LIGHTS. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 26: TREE TRIMMER SHALL MEET THE FOLLOWING MIN REQUIREMENTS: OPERATING WEIGHT - 24, 300 LBS. NET POWER - 127 HP, 75' REACH FROM GROUND, AND COMOPOSITE BOOM ELECTRICALLY INSULATED. THIS EQUIPMENT SHALL BE EQUIPPED WITH A FRON MOUNTED HYDRAULIC BLADE THAT IS CAPABLE OF BEING OPERATED FROM THE CAB OF THE MACHINE. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 27: SHALL BE COMPATIBLE WITH LINE ITEM # 1. TO BE USED ON TRACK EXCAVATOR WITH BOOM. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 28: SHALL MEET THE MINIMUM SPECIFICATIONS: HYDRAULIC TRACKED EXCAVATOR W/OPERATOR; DIESEL POWERED 52 HP, 15, 900 POUND OPERATING WEIGHT, 7 METRIC TONS. RUBBER TRACKS, FRONT MOUNTED PUSH BLADE, ZERO TURN, OFFSET BOOM FOR MOBILITY AND CONFINED SPACE WORK. AS NEEDED THE ABILITY TO PROVIDE A 3 FOOT OR 18 INCH WIDE GENERAL PURPOSE BUCKET. VENDOR IS TO PROVIDE ON ( 1) PIECE OF THIS EQUIPMENT AT ANY GIVEN TIME. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 29: LARGE EXCAVATOR WITH BUCKET. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 30: HYDRAULIC BREAKER ATTACHMENT Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 31: SHALL MEET THE MINIMUM SPECIFICATIONS: TRUCK MOUNTED HYDRAULIC CRANE 55 TON W/OPERATOR, DIESEL POWERED 392 HP SINGLE ENGINE, 73, 000 POUND OPERATING WEIGHT, 110 FOOT BOOM LENGTH, 8X4X4 AXLE CONFIGURATION, MINIMUM LIFT CAPACITY OF 54. 5 TONS. ABILITY TO LIFT AND SWING 9. 1 TON 30' LONG CONCRETE BARRIER WALL AT A 40 FOOT FULL RADIUS. SUPPLY 1. 25 TO 2 CY CLAMSHELL BUCKET AS NEEDED TO DREDGE CHANNELS, REMOVE FLOOD DEBRIS, CLEAN MUD SLIDES FROM ROADWAYS, OR REMOVE AND LOAD TREES/BRUSH FROM RIVER BRIDGE PIERS. PRICE PER HOUR INCLUDES SUPPLYING AS NEEDED THE ABILITY TO PROVIDE BLOCKS, HOOKS, TAG LINES, RIGGING, CABLES, AND CRIBBING. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 32: THE VENDOR SHALL BE PAID $ **** IN EMERGENCY MOBILIZATION COSTS FOR EACH PIECE OF REQUIRED EQUIPMENT THAT IS DELIVERED TO THE WORK SITE AND BEGINS WORK WITHIN 24 HOURS OF NOTIFICATION. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 1: Monthly fixed price for full system operations and compliance support. Facilities include but are not limited to; tOne geographic location, Bluegrass Station in Lexington, KY, Fayette County tOne 100, 000- gallon max flow WWTP with a historical average of 20, 000 GPD. tEight wastewater lift stations tOne permitted WWTP outfall tTwo permitted stormwater outfalls t16 miles of sewer collection line t8 miles of force main sewer line t21 miles of stormwater collection line tSee scope of work for more details In accordance with section 13 METHOD OF AWARD, vendor should enter the number of years of experience performing the requested services as a comment to the solicitation response.

Lot 2: There shall not be a percentage charge for laboratory services provided by the contractor due to KRS **** ( Cost Plus Contract Prohibited) and Federal Acquisition Regulations. Laboratory services shall be provided by the contract vendors at cost to the facility ( upon receipt of invoices from the laboratory services. ) The Contractor shall provide laboratory testing services necessary to monitor, evaluate, and document the performance and compliance of Bluegrass Station Water Operations. Responsibilities will include: tMonthly MOR testing tMonthly DMR testing tAnnual water quality report provided by KAW tAS NEEDED: Bacteriological water testing Responsibilities may include: tCollecting water, wastewater, sludge, and other required samples. tPerforming required chemical, biological, physical, and regulatory testing. tTesting for parameters required by applicable permits, regulatory agencies, and Water Operations requirements. tProviding properly certified laboratory analysis and test results. tMaintaining chain- of- custody documentation where required. tCoordinating sample delivery with an appropriately certified laboratory. tProviding laboratory reports to Bluegrass Station Water Operations. tPromptly notifying Bluegrass Station of test results that indicate a potential regulatory violation, operational problem, or condition requiring immediate attention. tProviding supporting laboratory invoices with reimbursement requests. tSub- contracting is authorized Laboratory services shall be performed by laboratories holding all certifications required for the applicable testing. Please enter . 01 for this line and 1 day for delivery for this line.

Lot 3: Per load pricing. The Contractor shall provide transportation and lawful disposal of residual materials generated through Bluegrass Station Water Operations. Responsibilities may include: tRemoval of sludge, residuals, screenings, grit, wastewater treatment residuals, and other authorized materials. tLoading residuals using appropriate equipment. tTransportation using properly permitted and maintained vehicles. tDisposal or beneficial reuse at an approved facility. tProviding manifests, weight tickets, disposal receipts, or other documentation required by Bluegrass Station. tMaintaining compliance with applicable environmental and transportation regulations. tProviding emergency residual removal when authorized. tPreventing spills, releases, and contamination during loading, transportation, and disposal. tSub- contracting is authorized Each load shall be documented and invoiced in accordance with the Delivery Order.

Lot 4: Hourly rate. The Contractor shall provide skilled labor necessary to diagnose, repair, restore, and maintain Water Operations equipment and infrastructure. Responsibilities may include: tTroubleshooting operational problems. tRepairing water and wastewater treatment equipment. tRepairing pumps, valves, piping, tanks, controls, and related equipment. tCorrecting mechanical and operational deficiencies. tRepairing or replacing equipment components when authorized. tPerforming preventive or corrective maintenance as directed. tResponding to equipment failures. tAssisting Water Operations personnel with troubleshooting and system restoration. tProviding labor is necessary to return equipment to safe and reliable operation. tDocumenting work performed and identifying recommended follow- up repairs. tSub- contracting is authorized Labor shall be billed at the applicable contract hourly rate.

Lot 5: Hourly rate. The Contractor shall provide qualified electrical personnel to inspect, troubleshoot, maintain, repair, modify, and install electrical systems supporting Water Operations. Responsibilities may include: tTroubleshooting electrical equipment and circuits. tRepairing electrical distribution equipment. tElectrical repairs associated with pumps, motors, blowers, controls, and treatment equipment. tRepairing or replacing wiring, conduit, disconnects, breakers, panels, and related components. tInstalling electrical equipment and components. tTesting electrical systems. tSupporting generator and emergency power systems. tPerforming electrical work associated with treatment plant improvements. tMaintaining electrical systems in accordance with applicable codes and safety requirements. tProviding emergency electrical response when authorized. tSub- contracting is authorized All electrical work shall be performed by appropriately qualified personnel and in accordance with applicable electrical codes, OSHA requirements, and Commonwealth requirements.

Lot 6: Hourly rate. The Contractor shall provide qualified instrumentation and controls personnel to maintain and troubleshoot the control systems supporting Water Operations. Responsibilities may include: tTroubleshooting instrumentation and control system failures. tCalibrating sensors, meters, transmitters, and related instruments. tTesting and repairing control devices. tTroubleshooting Programmable Logic Controllers ( PLCs). tTroubleshooting Human- Machine Interfaces ( HMIs). tSupporting Supervisory Control and Data Acquisition ( SCADA) systems. tTroubleshooting communication between field devices and control systems. tRepairing or replacing instrumentation and control components. tModifying control logic when specifically authorized. tSupporting automated water and wastewater treatment processes. tDocumenting calibration, testing, repairs, and system modifications. tAssisting Water Operations personnel with system optimization and troubleshooting. tSub- contracting is authorized Any modification to PLC programming, SCADA systems, or control logic shall require authorization from Bluegrass Station prior to implementation.

Lot 7: Hourly rate. The Contractor shall provide emergency labor to respond to urgent or critical Water Operations failures that could result in loss of service, environmental impact, equipment damage, regulatory non- compliance, or unsafe conditions. Emergency services may include: tWater treatment system failures. tWastewater treatment system failures. tPump failures. tElectrical failures. tControl system failures. tMajor leaks or system failures. tLoss of electrical power. tGenerator or emergency power failures. tCritical instrumentation failures. tFlooding or other facility emergencies. tStorm- related damage. tEnvironmental or regulatory emergencies. tOther conditions designated as an emergency by Bluegrass Station. The Contractor shall: tProvide an emergency contact available 24 hours per day, 365 days per year. tRespond within the timeframe established by the applicable Delivery Order or emergency call. tProvide qualified personnel and appropriate equipment. tTake immediate action to stabilize the system and protect personnel, equipment, and the environment. tCoordinate emergency activities with Bluegrass Station Water Operations personnel. tProvide a written summary of emergency work performed upon request. Emergency labor shall be billed at the established emergency hourly rate.

Lot 8: Per meter. The Contractor shall test water meters ranging from 5/8- inch through 1- inch in accordance with applicable standards and Bluegrass Station requirements. Responsibilities may include: tRemoving and/or isolating the meter as necessary. tInspecting the meter for visible damage or defects. tTesting meter accuracy. tIdentifying meters operating outside acceptable tolerances. tDocumenting meter readings and test results. tIdentifying meters requiring repair or replacement. tReinstalling tested meters when included in the Delivery Order. tProviding a written test report. tSub- contracting is authorized Each meter shall be individually identified and the test results documented.

Lot 9: Per meter. The Contractor shall test 2- inch water meters serving Bluegrass Station facilities. Responsibilities may include: tInspecting the meter and associated connections. tTesting meter accuracy. tIdentifying excessive wear, damage, or malfunction. tDocumenting beginning and ending readings. tRecording test results and accuracy. tIdentifying meters requiring repair, calibration, or replacement. tReinstalling the meter when authorized. tProviding documentation of testing performed. tSub- contracting is authorized Each meter shall be individually identified and documented.

Lot 10: Per meter. The Contractor shall test 3- inch water meters serving Bluegrass Station facilities. Responsibilities may include: tInspecting the meter and associated components. tTesting meter accuracy. tIdentifying damage, wear, or malfunction. tDocumenting meter readings. tRecording test results and accuracy. tIdentifying meters requiring repair, calibration, or replacement. tReinstalling the meter when authorized. tProviding a written test report. tSub- contracting is authorized Each meter shall be individually identified and documented.

Lot 11: There shall not be a percentage charge for parts provided by the repair technician for as needed repairs due to KRS **** ( Cost Plus Contract Prohibited) and Federal Acquisition Regulations. Repair parts shall be provided by the contract vendors at cost to the facility ( upon receipt of invoices from the manufacturer. ) The Contractor shall provide materials, replacement parts, components, and consumables necessary to complete authorized work under this Master Agreement. Materials may include: tPumps and pump components. tMotors. tValves and valve components. tPiping and fittings. tElectrical components. tControl components. tInstrumentation. tSensors and transmitters. tPLC and SCADA components. tWater meter components. tTreatment equipment components. tFilters and treatment consumables. tGaskets, seals, fasteners, and related hardware. tOther materials are specifically authorized by Bluegrass Station. Materials shall be: tNew and suitable for the intended application unless otherwise approved. tCompatible with existing Water Operations equipment. tPurchased from reputable suppliers. tBilled at the Contractor' s actual documented acquisition cost. tSupported by original supplier invoices or receipts. Please enter . 01 for this line and 1 day for delivery for this line.