BidHits™ uses cookies to provide an individualized service and care for the privacy and protection of shared data.
By browsing this site, we understand that you agree to the terms of our Privacy Policy.
Drying Cabinet Government Bids & RFPs
Government bid alerts, regional filters, and fast access to documents
Monitor more sources with less manual work. 14-day free trial, no auto-charge.
90% recommend BidHits™ (1055 real users, 05/29/2026).Methodology
Last updated on 04/19/2026.
04/17/2026 - USA | KS | LEAVENWORTH COUNTY | LEAVENWORTH Small City
Pass Through Cabinet/ Dry Cabinet/ Instrument Drying Cabinets
AMSCO Pass Through Dry Cabinet - 1. STATEMENT OF WORK The contractor shall provide all services, labor, travel, transportation, material, shipping, parts, connections, and equipment necessary for provision and on- site installation of equipment to provide a
medical and surgical instruments, equipment, and supplies
AI helper
The contractor shall provide and install two pass-through instrument drying cabinet units at the VA Medical Center in Kansas City, MO. This includes all services, labor, materials, shipping, and on-site installation. Training for clinical staff is also required. The cabinets must meet specific dimensions and separation requirements to prevent cross-contamination. The contractor is responsible for conducting site visits to verify existing conditions and discrepancies before submitting a proposal. A minimum of a 2-year service agreement for full-service maintenance is required post-installation, with emergency response times of within 4 hours for equipment failures. All work must comply with safety regulations and applicable codes. Documentation of maintenance performed must be provided. Performance will be monitored by the Contracting Officer Representative (COR). Work hours are typically Monday-Friday, 7:30 am - 4:00 pm. Photography and video recording are prohibited on VA premises unless authorized.
The bid notice does not explicitly state a specific delivery deadline for the equipment or services.
The bid notice does not specify the payment terms for this contract.
The vendor shall provide full service maintenance through a service agreement for a minimum of 2 years post installation.
The bid notice does not explicitly state the award criterion.
The contractor shall ensure that only fully qualified technicians and engineers are employed in the performance of all work performed under this contract.
The bid notice does not explicitly mention penalties for non-compliance, but states that non-compliance may result in job site suspense until compliance is met at the contractor's expense.
It is the responsibility of the contractor to conduct site visits, verify existing conditions, quantities of materials, installation instruction of materials to be used, and discrepancies or conflicting requirements in the statement of work before preparing the final proposal.
The bid notice does not specify a deadline for challenges or objections.
PAINT BLAST BOOTH MAINTENANCE REPAIR 435CTS - The contractor shall provide all non- personal services, management, tools, supplies, and labor necessary to perform maintenance and repairs of all equipment listed in the & quot; Instruction to Offers& quot; section of the RFQ and appendices of
Scheduled maintenance and inspection of blasting plant, paint drying plant, blasting cabinet, paint gun cleaner unit, heated parts washer unit, water cutting system.
AI helper
The contract requires comprehensive maintenance and repair services for specific industrial equipment, including paint drying plants, blasting plants, blasting cabinets, paint gun cleaner units, heated parts washers, and water cutting systems. Services must adhere to manufacturer's recommended schedules, technical standards, and industry best practices to ensure safe and continuous operation. Only personnel trained, certified, and authorized by the manufacturer are permitted to perform inspections, maintenance, and repairs. The contractor must supply all necessary new OEM parts and report any shortages immediately. Maintenance reports are required within five business days after completion. The contractor must also comply with environmental laws and regulations and report labor hours through the Contractor Manpower Reporting Application (CMRA). Questions are due by April 3, 2026, and offers by April 24, 2026.
The bid notice does not explicitly state a delivery deadline for the services. However, maintenance reports are required within five business days after scheduled maintenance is conducted.
The bid notice states that only companiespersonnel trainedcertified and authorized by the manufacturer for the service as required shall perform inspections, maintenance, and repairs.
The bid notice mentions that The contractor will be given 72 hours after notification to correct deficiencies. If deficiencies are not corrected within the prescribed time frame the 435th cts poc will notify the co for action in accordance with far clause **** a.
The bid notice does not mention the submission of samples.
Sterile Processing Medivator EndoDry Cabinet - The Department of Veterans Affairs - Network Contracting Office 17 is seeking to procure to purchase Medivator EndoDry, Cabinet, 8 shelves, with an authorized vendor to supply and deliver the item( s). This equipment is intended for use by the VA V
Medivator Endodry Cabinet
AI helper
This is a sources sought notice for market research purposes only. The Department of Veterans Affairs Network Contracting Office 17 is seeking information from qualified businesses capable of providing a Medivator Endodry Cabinet, 8 shelves, with an authorized vendor to supply and deliver the item. The equipment is intended for use by the VA Valley Coastal Bend Harlingen Care Center in Harlingen, Texas. Interested parties should respond via email to ***@***. *. * no later than April 24, 2026, 12:00 pm CST. Responses must include company information, business classification, SDVOSB/VOSB compliance (if applicable), small business status, capability statement, equipment manufacturer and country of origin, current federal contracts, and contract availability. The draft Statement of Work (SOW) is attached for additional details. Delivery is expected to be FOB destination to the VA Valley Coastal Bend Harlingen Care Center. The products shall be covered by the vendor's standard warranty, no less than one year following the first day of use at VATVCB.
The awardee's actual delivery dates will be confirmed by the VA upon award. Post-award, the vendor will coordinate delivery with the POCs listed prior to beginning any work. Delivery must be coordinated with VA logistics warehouse primary, Ronnie Williams, prior to any attempts at delivery. Delivery of items identified in this document shall take place during normal business hours, which are defined as: **** to **** (8:00 am to 4:00 pm) Central Time, Monday through Friday, and excluding federal holidays.
The products shall be covered by the vendor's standard warranty terms and provisions. The warranty coverage shall be no less than one year following the first day of use at VATVCB. The vendor shall provide a warranty certificate/form stating the warranty period, terms, and information required to initiate the warranty. The vendor shall extend such warranty directly to the customer as if such customer had purchased the products directly from the vendor. The vendor shall warrant the products against defects in material and workmanship under normal use and service, repair or replace at vendor's cost any defective product or issue a credit or refund based on the purchase price paid therefor and the vendor shall pay or refund the amount of all freight and shipping charges for any defective products returned under this paragraph.
Interested parties potential candidates having the capabilities necessary to provide the stated services at a fair and reasonable price are invited to respond to this sources sought notice. Responses are being sought from qualified businesses capable of providing the required equipment and services outlined below. All responses must include company information, business classification, SDVOSB/VOSB compliance (if applicable), small business status, capability statement, equipment manufacturer and country of origin, current federal contracts, and contract availability.
Pass Through Cabinet/ Dry Cabinet/ Instrument Drying Cabinets
AMSCO Pass Through Dry Cabinet - 1. STATEMENT OF WORK The contractor shall provide all services, labor, travel, transportation, material, shipping, parts, connections, and equipment necessary for provision and on- site installation of equipment to provide a
pass through dry cabinet
AI helper
The U. S. Department of Veterans Affairs is seeking sources for the provision and onsite installation of a minimum of two pass-through instrument drying cabinet units at the Kansas City VA Medical Center. The cabinets must support sterile processing services for reprocessing reusable medical devices. Key specifications include dimensions, maintaining separation between decontamination and high-level disinfection environments, HEPA filtration, and the ability to dry heat-sensitive devices. The contractor is responsible for site visits, verifying existing conditions, and providing full installation services. A minimum 2-year service agreement for maintenance is required, with emergency response for equipment failures within 4 hours. The contractor must comply with all safety regulations and provide documentation of maintenance performed. Work will be performed during standard business hours, Monday through Friday. Contractor personnel must wear identification badges and adhere to VA premises rules, including prohibitions on weapons and alcohol.
The bid notice does not explicitly state a delivery deadline for the pass-through instrument drying cabinets.
The bid notice does not specify the payment terms.
The bid notice states that the vendor shall provide full service maintenance through a service agreement for a minimum of 2 years post installation.
The bid notice does not specify the award criterion.
The contractor shall ensure that only fully qualified technicians/engineers are employed in the performance of all work performed under this contract.
The bid notice does not explicitly detail penalties for non-compliance, but mentions that non-compliance may result in job site suspense until compliance is met at the contractor's expense.
It is the responsibility of the contractor to conduct site visits, verify existing conditions, quantities of materials, installation instruction of materials to be used, and discrepancies or conflicting requirements in the statement of work before preparing the final proposal.
The bid notice does not mention the submission of samples.
The bid notice does not specify a deadline for challenges.
****- DRYING CABINET - Brand name or Equal - This Source Sought Notice ( SSN) is issued for market information and planning for future acquisition in accordance with ( IAW) Federal Acquisition Regulation ( FAR) ****( e). Responses to notice **** will improve the understanding of the Gove
medical and surgical instruments, equipment, and supplies
AI helper
This is a source sought notice (SSN) for market information and planning for future acquisition of medical and surgical instruments, equipment, and supplies. The Department of Veterans Affairs (VA), Network Contracting Office 22 (NCO 22), is seeking sources for a brand name or equal to Steris drying cabinet for the VA Southern Arizona Healthcare System. This is not a solicitation, and responses cannot form a binding contract. Information received will be safeguarded. Inquiries should be submitted via email to ***@***. *. *, referencing SSN **** in the subject line.
We selected the most helpful reviews from real users. Order may change periodically.
All bids related to our product are captured by you and sent to us. In my opinion, it’s perfect—broad coverage and easy searches across the bid documents.
R. M. Ferreira
It is complete and optimal, it improves my time.
R. de L. Cruz
The idea of ​​using a keyword and sending the information by email is very good.
U. Solutions
It encompasses all portals in one place.
G. Ferrea
Excellent platform to help promote and expand the reach of your work.
C. Merino
Great recommendations appear. Having the bid process link right in the email body helps a lot and saves time.
V. Kafka
It helps me identify areas of opportunity and find bids related to my work area.
I. J. R. Beltran
I’m absolutely delighted with the system’s performance so far. This software has exceeded all my expectations, ensuring that no crucial keyword, such as “cathodic protection” and others related, goes unnoticed. Its precision and efficiency are remarkable, providing extra peace of mind in our operations. I’m truly impressed by its effectiveness.
S. I. B. Pinheiro
They update me the same day things are published, so I don’t have to check every public agency’s website.
L. C. De Moura
I am very satisfied; it's a very useful tool.
J. S. Garcia
Efficiency in search times.
R. Chavez
The system is very practical. It’s helped increase my monthly revenue.
BidHits™ is a government bid search engine that monitors official portals and brings relevant federal, state and local opportunities into one place. You can search on the site and receive scheduled email alerts.
Enter your email and activate the trial. For 14 days you can use the main features, including alerts and access to results. When it ends, if you do not subscribe at /subscription.php, the bid list becomes limited and you will not be charged automatically.
1) Add keywords that describe what you sell. 2) Start the trial. 3) Adjust regions, delivery times and email style after signup.
Whenever possible, yes. Some official portals require login or block direct links; in those cases we point you to the official process page so you can download the documents.
Yes. You can filter by region, procurement method, dates and value ranges. You can also save preferences for future alerts and searches.
Yes. In the dashboard you can see bids on a map and use it to plan follow-up by location.
It can happen. Smart Search uses your keywords to find related opportunities, not only exact matches. Add specific terms and remove off-topic results to improve future alerts.
Yes. You can query bids via API. Documentation at /api_integration.php. Ideal for CRM, BI and automations.
In Settings you can pause alerts or adjust delivery times. If you want to delete your account, just contact us. During the free trial there is no auto-charge.
We monitor major official sources every day at the federal, state and local levels. New bid notices are added as soon as they are captured from the source portal.
Plans start at $ 43.00/month. You can begin with a free trial and there is no auto-charge.
Add what you sell, get scheduled alerts, open documents or the official page, and use filters by region and method.
Transcript
Welcome to BidHits™.
Finding public tenders and bids is important. But what really matters is quickly identifying the opportunities that match what your company sells.
To get started, enter a few keywords that describe your products or services. BidHits™ shows relevant opportunities, highlights your keywords, and organizes everything by date.
Smart search is already enabled and uses artificial intelligence to expand your results, even when the tender uses different words from the ones you searched for.
For each opportunity, you can view a summary, access documents, mark it as a favorite, add private notes, remove what is not relevant, or view it on the map.
You can also use filters, run searches, and explore the day's opportunities directly on the map.
Start using BidHits™ now. It's fast, practical, and you can try it for free.
AI Assistant
Ask me about the bid...
Loading summary...
Methodology
Unaided survey with 1055 active users, conducted through 05/29/2026.
Single question: "Would you recommend our services to a friend or colleague?" - 90% answered "yes".
