Latest US Floor Mat Contracts & Bids

Bid submission due August 5, 2025, at 2:00 PM EST. Bidders must comply with New Jersey state requirements (affirmative action, prevailing wage rate act, ownership disclosure, etc. ). A pre-bid meeting and site visit are strongly recommended (July 9, 2025). Bidders must be prequalified by the New Jersey Division of Property Management and Construction (DPMC) with a minimum aggregate rating of $10,000,000 or more. A bid bond or certified check equal to 10% of the base bid is required. The project involves alterations to an existing film studio to accommodate a virtual reality lab. The construction schedule must be detailed, showing anticipated completion dates for various phases of the project. Additional documents are required (e. g. , business registration, performance and payment bonds, insurance certificates, etc. ).

The City of Cleveland is requesting bids for utility trailers. The closing date for bids is July 10, 2025, at 3:00 PM. Bids must be submitted electronically to ***@***. *. * subject line of the email must include the document ID number and buyer's name. All bids must be enclosed in a sealed envelope and marked with the RFb number. The bid must be submitted to: division of purchases supplies 601 lakeside ave room 128, city hall cleveland, oh **** costs must include shipping, handling, and any applicable costs. Vendors must submit product warranty information, lead time for delivery, product literature, and specifications with the bid. The Cleveland Division of Water will review and approve the product literature prior to bid award. Delivery must be stated in terms of work days after receipt of the order. All charges for shipping must be included within the unit price. A Northern Ireland affidavit must be completed, signed, and included with each bid. Bidders must address all questions to the buyer. A material safety data sheet (MSDS) is required for each applicable item. This purchase order does not permit price increases. It is the bidder's responsibility to ensure the accuracy and completeness of the information in the RFb. If there are any questions about the accuracy or completeness of the bid documents, contact the buyer immediately.

Lot 1: 20- foot box trailer - SPECIFICATIONS- Gross Vehicle Weight Rating ( GVWR): Minimum 14, 000 pounds. Size: Interior Net Height ( including beam width and lighting width): Minimum 7 feet, 4 inches ( 88 inches). Trailer Width: 8. 5 feet. Length: 20- foot box Both the 20- foot box and 24- foot box trailers to be built to work and look the same. Frame: Frame Type: Rectangular Tube. Frame Material: Aluminum ( Minimum 11 gauge for frame). Frame Configuration ( Spacing on Center): 12 inches of spacing. Nose Type: Flat. Tongue Option: A- Frame ( Extended). Front Jack Options: Electric. Ball Coupler: 2 5/16 inches. Wiring: Wire tubing around wires along the inside of frame. Roof: Rounded Aluminum with no seams. Seam: Aluminum ( Seamless). Vent: Minimum two ( 2) Vents Centered Vents must be hood covered and evenly distributed on center. Walls, Flooring, and Doors: Attachment Method: Screwless. Insulated walls, ceiling, and roof. Under Flooring Corrosion- Inhibiting Moisture Barrier. Rubber Tread Plate ( RTP) on interior floor and wheel wells. Skin Thickness: 0. 05 inches. Curb Side Door: Minimum 36 inches X 78 inches - forward placement. Rear Door Type: Heavy Duty Ramp Door with flap and extension Prefer gapless continuous hinge. Flooring Material: Aluminum. Axle, Suspension, Brake, and Tire: Number of Axles: Two ( 2) ( tandem) - 7, 000 pounds per axle. Type of Axles: Torsion. Brake System: Electric Tire Size: Must be ST235/80R16 Radial Tire Load Range: Minimum E- 10 ply rated. Spare tire and wheel must be included and the same as what on the trailer Cargo and Interior Area: E- Track t: Must be attached to frame by weld. Wall Locations: Three ( 3) recessed tracks the length of the entire wall - On center at 15 inches, 44 inches, 64 inches. Floor Locations: Three ( 3) recessed tracks - Entire length of floor - Placed on both outer edges and one on center. D- Rings: Attached to frame by weld. Floor Locations: Minimum six ( 6) recessed, 5, 000 pounds each, D- Ring anchors ( 2 - Front, 2 - On Center, 2 - Rear). Lighting: Inte
Lot 2: 24- foot box trailer - SPECIFICATIONS- Gross Vehicle Weight Rating ( GVWR): Minimum 14, 000 pounds. Size: Interior Net Height ( including beam width and lighting width): Minimum 7 feet, 4 inches ( 88 inches). Trailer Width: 8. 5 feet. Length: 24- foot box Both the 20- foot box and 24- foot box trailers to be built to work and look the same. Frame: Frame Type: Rectangular Tube. Frame Material: Aluminum ( Minimum 11 gauge for frame). Frame Configuration ( Spacing on Center): 12 inches of spacing. Nose Type: Flat. Tongue Option: A- Frame ( Extended). Front Jack Options: Electric. Ball Coupler: 2 5/16 inches. Wiring: Wire tubing around wires along the inside of frame. Roof: Rounded Aluminum with no seams. Seam: Aluminum ( Seamless). Vent: Minimum two ( 2) Vents Centered Vents must be hood covered and evenly distributed on center. Walls, Flooring, and Doors: Attachment Method: Screwless. Insulated walls, ceiling, and roof. Under Flooring Corrosion- Inhibiting Moisture Barrier. Rubber Tread Plate ( RTP) on interior floor and wheel wells. Skin Thickness: 0. 05 inches. Curb Side Door: Minimum 36 inches X 78 inches - forward placement. Rear Door Type: Heavy Duty Ramp Door with flap and extension Prefer gapless continuous hinge. Flooring Material: Aluminum. Axle, Suspension, Brake, and Tire: Number of Axles: Two ( 2) ( tandem) - 7, 000 pounds per axle. Type of Axles: Torsion. Brake System: Electric Tire Size: Must be ST235/80R16 Radial Tire Load Range: Minimum E- 10 ply rated. Spare tire and wheel must be included and the same as what on the trailer Cargo and Interior Area: E- Track: Must be attached to frame by weld. Wall Locations: Three ( 3) recessed tracks the length of the entire wall - On center at 15 inches, 44 inches, 64 inches. Floor Locations: Three ( 3) recessed tracks - Entire length of floor - Placed on both outer edges and one on center. D- Rings: Attached to frame by weld. Floor Locations: Minimum six ( 6) recessed, 5, 000 pounds each, D- Ring anchors ( 2 - Front, 2 - On Center, 2 - Rear). Lighting: Interi