™Planer Government Bids & RFPs
Government bid alerts, regional filters, and fast access to documents
See also
90% recommend BidHits (1115 real users, 11/06/2026).
Methodology
Texas Department Of Transportation - TX
Cold Planer With Operator - Services to provide cold planer rental with operator for the TxDOT Waco District at various locations to include McLennan, Bell, Bosque, Coryell, Hamilton, Limestone, Falls and Hills Counties NOTE: All information or changes related to this solicitation will be posted on this website. Respondents should monitor this website for any addendums, additional documents, questions and answers, or changes. The opening date specified on this posting is the due date for submittal of respon
Bid Close Date:
Texas Department Of Transportation - TX
Cold Planer With Operator - Services to provide cold planer rental with operator for the TxDOT Waco District at various locations to include McLennan, Bell, Bosque, Coryell, Hamilton, Limestone, Falls and Hills Counties NOTE: All information or changes related to this solicitation will be posted on this website. Respondents should monitor this website for any addendums, additional documents, questions and answers, or changes. The opening date specified on this posting is the due date for submittal of respon
Bid Close Date:
Commonwealth Of Kentucky - Transportation - Office Of The Secretary - KY
Federal - equipment rental w/operator district 8
Bid Close Date:
Lot 12: TRACKED SKID STEER MIN OF 70 HP WITH HIGH FLOW HYDRAULIC SYSTEM TO OPERATE SPECIAL ATTACHMENTS. SKID STEER WILL INCLUDE THE FOLLOWING BASIC ATTACHMENTS; BUCKET, HEAVY DUTY FORKS, SCRAP GRAPPLE BUCKET. THE FOLLOWING TWO ITEMS ARE HYDRAULIC FLOW SKIED STEER ATTACHMENTS THAT WILL BE PAID BY THE HOUR IN ADDITION TO SKID STEER/OPERATOR WHEN USED: 24 AND 40 INCH COLD PLANER ( MILLING HEAD) Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 1: Tracked Excavator with operator must be Diesel powered, minimum of 145 HP, and a minimum of 45, 000 LB operating weight. Vendor must be able to provide various buckets between 28 IN to 52 IN wide, with hydraulic grapple thumb attachment mounted on boom stick. Vendor must be capable of providing up to 2 of these excavators at any time. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________ ONLY ONLINE BIDS WILL BE ACCEPTED FOR THIS RFB. Emailed and hard copies delivered by any method WILL NOT BE ACCEPTED. See attached document How to Respond to an Online Bid through the Kentucky Vendor Self Service site ( updated). pdf. Please enter contact person, phone number and email in the Comments Section. Vendors should review and update, if necessary, all addresses and contact persons for their account prior to bid submission. This information will carry forward to a contract if awarded, therefore please ensure all information is correct.
Lot 2: Tracked Excavator must be Diesel powered, minimum of 175 HP, and have a minimum 58, 000 LB operating weight. Equipped with a minimum 50 FT Long Reach boom at ground level from center of machine, various buckets between 28 IN to 52 IN wide. Toothed and smooth buckets must be available, and an operator. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 3: SHALL BE COMPATIBLE WITH LINE ITEM # 1. MINIMUM 4, 000 FT- LBS ( ENERGY CLASS) TO BE USED ON TRACK EXCAVATOR WITH 25' BOOM, MIN GROUND WEIGHT OF 46, 000 LBS OR GRATER AND MIN OF 145 HP OR GREATER. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 4: MINIMUM 300 FT- LBS ( ENERGY CLASS) TO BE USED ON HIGH FLOW HYDRAULIC SKID STEER OR LONG REACH 50 FT MINIMUM EXCAVATOR. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 5: MULCHING HEAD WITH A MIN OF 24" CUTTING WIDTH. ATTACHMENT SHALL ALSO INCLUDE 90- DEGREE TILT MOUNT. TO BE USED ON TRACK EXCAVATOR WITH A MINIMUM OF 145 HP AND 46, 000 LB MINIMUM WEIGHT. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 6: MULCHING HEAD WITH A MINIMUM OF 36" CUTTING WIDTH. ATTACHMENT SHALL ALSO INCLUDE 90 DEGREE TILT MOUNT. TO BE USED ON TRACK EXCAVATOR. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 7: TRUCK RENTAL W/OPERATOR, FOR ON HIGHWAY USE, TANDEM WITH 350 HP MINIMUM, WITH MINIMUM 16 FOOT BED. VENDOR SHALL BE ABLE TO PROVIDE UP TO 12 TRUCKS. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 8: ARTICULATED TRUCK RENTAL W/OPERATOR, 25 TON OR GREATER 4 X 4 Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 9: 60 HP MIN DIESEL ENGINE, EQUIPPED WITH ANGLE/TILT AND CORNER CUTTING BLADE. 15, 000 LB MINIMUM OPERATING WEIGHT W/OPERATOR. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 10: 140 HP OR GREATER DIESEL ENGINE, EQUIPPED WITH ANGLE/TILT AND CORNER BLADE. 33, 000 LB MINIMUM OPERATING WEIGHT W/OPERATOR. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 11: OUTPUT OF MINIMAL 6 KW @60HZ WITH A HEIGHT OF 12 TO 30 FT, 4 LIGHTS PER UNIT. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 12: TRACKED SKID STEER MIN OF 70 HP WITH HIGH FLOW HYDRAULIC SYSTEM TO OPERATE SPECIAL ATTACHMENTS. SKID STEER WILL INCLUDE THE FOLLOWING BASIC ATTACHMENTS; BUCKET, HEAVY DUTY FORKS, SCRAP GRAPPLE BUCKET. THE FOLLOWING TWO ITEMS ARE HYDRAULIC FLOW SKIED STEER ATTACHMENTS THAT WILL BE PAID BY THE HOUR IN ADDITION TO SKID STEER/OPERATOR WHEN USED: 24 AND 40 INCH COLD PLANER ( MILLING HEAD) Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 13: CAPABLE OF WORKING WITH HIGH FLOW HYDRAULIC SKID STEER, MIN 70 HP. HIGH FLOW TYPE W/HYDRAULIC SIDE SHIFT. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 14: CAPABLE OF WORKING WITH HIGH FLOW HYDRAULIC SKID STEER 70 HP. HIGH FLOW TYPE W/HYDRAULIC SIDE SHIFT. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 15: CAPABLE OF WORKING WITH HIGH FLOW HYDRAULIC SKID STEER MIN 70 HP. HYDRAULIC- DRIVEN CONVEYOR HEAVY DUTY WITH 10" HEAD AND TAIL PULLEYS AND VARIABLE SPEED, RIGHT OR LEFT SIDE DISCHARGE WITH HYDRAULIC WIDTH/HEIGHT ADJUSTMENT. ADJUSTABLE SHOULDERING ANGLE AND SHOULDER WIDTHS OF 1- 3. 5', WEIGHT ( EMPTY) **** LBS. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 16: 125 HP MINIMUM WITH 84" SMOOTH DRUM AND ATTACHABLE SHEEP FOOT DRUM PAD. 10 TON MINIMUM OPERATING WEIGHT. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 17: 140 HP MINIMUM, 40 INCH WIDE DRUM CAPABLE TO MILL 12 INCHES IN DEPTH, MOUNTED ON MINIMUM 22, 000 LB RUBBER TIRED LOADER. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 18: ARTICULATED WHEEL LOADER W/OPERATOR A MINIMUM 150 HP AND 3. 5 CU YD MIN BUCKET CAPACITY. 18, 000 LB MINIMUM GROUND WEIGHT. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 19: Provide certified flaggers and traffic control for maintenance operations on highway projects. Price per hour includes one flagger, warning signs, flagger paddles, PPE, and work zone set up in accordance with KYTC Standard Drawings. Vendor must be able to provide up to 6 flaggers, at any one time, if needed. With permission from the Engineer, the vendor may elect to use temporary traffic signals or portable traffic signals with appropriate signing in accordance with MUTCD or as directed by the Engineer. Vendor must also place and maintain appropriate work zone signing, flagger signs, flagger paddles, etc. in accordance with the MUTCD or as directed by the Engineer. Flaggers are required to wear appropriate safety equipment and must stay in constant communication with one another. Flaggers must work in accordance with Kentucky Dept of Highways Standard Drawings, in accordance with the MUTCD, and must comply with Section 112 of the current Standard Specifications for Road and Bridge Construction at all times. Payment will be made for the total number of man- hours worked for supplied traffic control each day. If vendor supplies portable traffic signals, payment by the man- hour will be based on number of man- hours flaggers would have been utilized instead of portable signals.
Lot 20: OPERATING WEIGHT 63, 000 LBS MINIMUM, NET POWER 180 HP MIN, DIESEL- POWERED, 30 METRIC TON MIN CLASS EXCAVATOR, EQUIPPED WITH UP TO 48" WIDE CY BUCKET WITH TEETH. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 21: SHALL BE COMPATIBLE WITH TRACK EXCAVATOR, MIN 180 HP, 63, 000 LB MIN WEIGHT. MIN 8, 000 FT- LBS ( ENERGY CLASS) Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 22: CAPABLE OF WORKING WITH HIGH- FLOW HYDRAULIC SKID STEER, QUICK ATTACH, MINIMUM 6- FOOT CUT & 7- FOOT LONG. MINIMUM 70 HP. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 23: IMPACT FREQUENCY RANGE 700- ****, OPERATING RANGE ****- **** PSI. COMPATIBLE WITH SKID STEER WITH HIGH FLOW HYDRAULICS MIN 70 HP. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 24: MINIMUM 12 FT BLADE, MINIMUM 130 HP, 29, 000 LB OPER WEIGHT Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 25: MUST BE 4- WHEEL DRIVE EQUIPPED WITH FLASHING SAFETY LIGHTS. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 26: TREE TRIMMER SHALL MEET THE FOLLOWING MIN REQUIREMENTS: OPERATING WEIGHT - 24, 300 LBS. NET POWER - 127 HP, 75' REACH FROM GROUND, AND COMPOSITE BOOM ELECTRICALLY INSULATED. THIS EQUIPMENT SHALL BE EQUIPPED WITH A FRONT- MOUNTED HYDRAULIC BLADE THAT IS CAPABLE OF BEING OPERATED FROM THE CAB OF THE MACHINE. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 27: SHALL BE COMPATIBLE WITH LINE ITEM # 1. TO BE USED ON TRACK EXCAVATOR WITH BOOM. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 28: SHALL MEET THE MINIMUM SPECIFICATIONS: Excavator must be diesel- powered, minimum 52 HP, minimum 15, 900 LB operating weight with operator. Equipped with rubber tracks, front- mounted push blade, reduced tail swing of 26 inches or less, and offset boom for mobility and confined workspace. Vendor must be able to provide various buckets between 18 IN to 52 IN wide, toothed and smooth buckets, with hydraulic grapple thumb attachment mounted on boom stick as needed. Vendor must be capable of providing 3 of these excavators at any time. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 29: X- Large Excavator w/Operator Hydraulic Tracked Excavator must be a minimum of 350 HP, diesel- powered, and have a minimum operating weight of 105, 000 lbs. Vendor capable of providing a minimum 48- inch- wide general- purpose bucket. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 30: HYDRAULIC BREAKER ATTACHMENT Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 31: SHALL MEET THE MINIMUM SPECIFICATIONS: TRUCK MOUNTED HYDRAULIC CRANE 55 TON W/OPERATOR, DIESEL POWERED 392 HP SINGLE ENGINE, 73, 000 POUND OPERATING WEIGHT, 110 FOOT BOOM LENGTH, 8X4X4 AXLE CONFIGURATION, MINIMUM LIFT CAPACITY OF 54. 5 TONS. ABILITY TO LIFT AND SWING 9. 1 TON 30' LONG CONCRETE BARRIER WALL AT A 40 FOOT FULL RADIUS. SUPPLY 1. 25 TO 2 CY CLAMSHELL BUCKET AS NEEDED TO DREDGE CHANNELS, REMOVE FLOOD DEBRIS, CLEAN MUD SLIDES FROM ROADWAYS, OR REMOVE AND LOAD TREES/BRUSH FROM RIVER BRIDGE PIERS. PRICE PER HOUR INCLUDES SUPPLYING AS NEEDED THE ABILITY TO PROVIDE BLOCKS, HOOKS, TAG LINES, RIGGING, CABLES, AND CRIBBING. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 32: Must be minimum 65 HP. Strike- off blade that can vary in length from 1 foot to at least 6 feet. 18- inch- wide variable- speed hydraulic drive conveyor system. Width of receiving hopper a minimum of 9 Ft. with a reinforced rubber bib. To be MIDLAND SPD- 6 Self Propelled or approved equivalent. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Commonwealth Of Kentucky - Transportation - Office Of The Secretary - KY
State - equipment rental w/operator district 8
Bid Close Date:
Lot 12: TRACKED SKID STEER MIN OF 70 HP WITH HIGH FLOW HYDRAULIC SYSTEM TO OPERATE SPECIAL ATTACHMENTS. SKID STEER WILL INCLUDE THE FOLLOWING BASIC ATTACHMENTS; BUCKET, HEAVY DUTY FORKS, SCRAP GRAPPLE BUCKET. THE FOLLOWING TWO ITEMS ARE HYDRAULIC FLOW SKIED STEER ATTACHMENTS THAT WILL BE PAID BY THE HOUR IN ADDITION TO SKID STEER/OPERATOR WHEN USED: 24 AND 40 INCH COLD PLANER ( MILLING HEAD) Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 1: Tracked Excavator with operator must be Diesel powered, minimum of 145 HP, and a minimum of 45, 000 LB operating weight. Vendor must be able to provide various buckets between 28 IN to 52 IN wide, with hydraulic grapple thumb attachment mounted on boom stick. Vendor must be capable of providing up to 2 of these excavators at any time. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________ ONLY ONLINE BIDS WILL BE ACCEPTED FOR THIS RFB. Emailed and hard copies delivered by any method WILL NOT BE ACCEPTED. See attached document How to Respond to an Online Bid through the Kentucky Vendor Self Service site ( updated). pdf. Please enter contact person, phone number and email in the Comments Section. Vendors should review and update, if necessary, all addresses and contact persons for their account prior to bid submission. This information will carry forward to a contract if awarded, therefore please ensure all information is correct.
Lot 2: Tracked Excavator must be Diesel powered, minimum of 175 HP, and have a minimum 58, 000 LB operating weight. Equipped with a minimum 50 FT Long Reach boom at ground level from center of machine, various buckets between 28 IN to 52 IN wide. Toothed and smooth buckets must be available, and an operator. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 3: SHALL BE COMPATIBLE WITH LINE ITEM # 1. MINIMUM 4, 000 FT- LBS ( ENERGY CLASS) TO BE USED ON TRACK EXCAVATOR WITH 25' BOOM, MIN GROUND WEIGHT OF 46, 000 LBS OR GRATER AND MIN OF 145 HP OR GREATER. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 4: MIN 300 FT- LBS ( ENERGY CLASS) TO BE USED ON HIGH FLOW HYDRAULIC SKID STEER OR LONG REACH 50 FT MINIMUM EXCAVATOR. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 5: MULCHING HEAD WITH A MIN OF 24" CUTTING WIDTH. ATTACHMENT SHALL ALSO INCLUDE 90- DEGREE TILT MOUNT. TO BE USED ON TRACK EXCAVATOR WITH A MINIMUM OF 145 HP AND 46, 000 LB MINIMUM WEIGHT. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 6: MULCHING HEAD WITH A MINIMUM OF 36" CUTTING WIDTH. ATTACHMENT SHALL ALSO INCLUDE 90 DEGREE TILT MOUNT. TO BE USED ON TRACK EXCAVATOR. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 7: TRUCK RENTAL W/OPERATOR, FOR ON HIGHWAY USE, TANDEM WITH 350 HP MINIMUM, WITH MINIMUM 16 FOOT BED. VENDOR SHALL BE ABLE TO PROVIDE UP TO 12 TRUCKS. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 8: ARTICULATED TRUCK RENTAL W/OPERATOR, 25 TON OR GREATER 4 X 4 Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 9: 60 HP MIN DIESEL ENGINE, EQUIPPED WITH ANGLE/TILT AND CORNER CUTTING BLADE. 15, 000 LB MINIMUM OPERATING WEIGHT W/OPERATOR. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 10: 140 HP OR GREATER DIESEL ENGINE, EQUIPPED WITH ANGLE/TILT AND CORNER BLADE. 33, 000 LB MINIMUM OPERATING WEIGHT W/OPERATOR. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 11: OUTPUT OF MINIMAL 6 KW @60HZ WITH A HEIGHT OF 12 TO 30 FT, 4 LIGHTS PER UNIT. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 12: TRACKED SKID STEER MIN OF 70 HP WITH HIGH FLOW HYDRAULIC SYSTEM TO OPERATE SPECIAL ATTACHMENTS. SKID STEER WILL INCLUDE THE FOLLOWING BASIC ATTACHMENTS; BUCKET, HEAVY DUTY FORKS, SCRAP GRAPPLE BUCKET. THE FOLLOWING TWO ITEMS ARE HYDRAULIC FLOW SKIED STEER ATTACHMENTS THAT WILL BE PAID BY THE HOUR IN ADDITION TO SKID STEER/OPERATOR WHEN USED: 24 AND 40 INCH COLD PLANER ( MILLING HEAD) Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 13: CAPABLE OF WORKING WITH HIGH FLOW HYDRAULIC SKID STEER, MIN 70 HP. HIGH FLOW TYPE W/HYDRAULIC SIDE SHIFT. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 14: CAPABLE OF WORKING WITH HIGH FLOW HYDRAULIC SKID STEER 70 HP. HIGH FLOW TYPE W/HYDRAULIC SIDE SHIFT. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 15: CAPABLE OF WORKING WITH HIGH FLOW HYDRAULIC SKID STEER MIN 70 HP. HYDRAULIC- DRIVEN CONVEYOR HEAVY DUTY WITH 10" HEAD AND TAIL PULLEYS AND VARIABLE SPEED, RIGHT OR LEFT SIDE DISCHARGE WITH HYDRAULIC WIDTH/HEIGHT ADJUSTMENT. ADJUSTABLE SHOULDERING ANGLE AND SHOULDER WIDTHS OF 1- 3. 5', WEIGHT ( EMPTY) **** LBS. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 16: 125 HP MINIMUM WITH 84" SMOOTH DRUM AND ATTACHABLE SHEEP FOOT DRUM PAD. 10 TON MINIMUM OPERATING WEIGHT. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 17: 140 HP MINIMUM, 40 INCH WIDE DRUM CAPABLE TO MILL 12 INCHES IN DEPTH, MOUNTED ON MINIMUM 22, 000 LB RUBBER TIRED LOADER. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 18: ARTICULATED WHEEL LOADER W/OPERATOR A MINIMUM 150 HP AND 3. 5 CU YD MIN BUCKET CAPACITY. 18, 000 LB MINIMUM GROUND WEIGHT. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 19: Provide certified flaggers and traffic control for maintenance operations on highway projects. Price per hour includes one flagger, warning signs, flagger paddles, PPE, and work zone set up in accordance with KYTC Standard Drawings. Vendor must be able to provide up to 6 flaggers, at any one time, if needed. With permission from the Engineer, the vendor may elect to use temporary traffic signals or portable traffic signals with appropriate signing in accordance with MUTCD or as directed by the Engineer. Vendor must also place and maintain appropriate work zone signing, flagger signs, flagger paddles, etc. in accordance with the MUTCD or as directed by the Engineer. Flaggers are required to wear appropriate safety equipment and must stay in constant communication with one another. Flaggers must work in accordance with Kentucky Dept of Highways Standard Drawings, in accordance with the MUTCD, and must comply with Section 112 of the current Standard Specifications for Road and Bridge Construction at all times. Payment will be made for the total number of man- hours worked for supplied traffic control each day. If vendor supplies portable traffic signals, payment by the man- hour will be based on number of man- hours flaggers would have been utilized instead of portable signals.
Lot 20: OPERATING WEIGHT 63, 000 LBS MINIMUM, NET POWER 180 HP MIN, DIESEL- POWERED, 30 METRIC TON MIN CLASS EXCAVATOR, EQUIPPED WITH UP TO 48" WIDE CY BUCKET WITH TEETH. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 21: SHALL BE COMPATIBLE WITH TRACK EXCAVATOR, MIN 180 HP, 63, 000 LB MIN WEIGHT. MIN 8, 000 FT- LBS ( ENERGY CLASS) Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 22: CAPABLE OF WORKING WITH HIGH- FLOW HYDRAULIC SKID STEER, QUICK ATTACH, MINIMUM 6- FOOT CUT & 7- FOOT LONG. MINIMUM 70 HP. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 23: IMPACT FREQUENCY RANGE 700- ****, OPERATING RANGE ****- **** PSI. COMPATIBLE WITH SKID STEER WITH HIGH FLOW HYDRAULICS MIN 70 HP. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 24: MINIMUM 12 FT BLADE, MINIMUM 130 HP, 29, 000 LB OPER WEIGHT Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 25: MUST BE 4- WHEEL DRIVE EQUIPPED WITH FLASHING SAFETY LIGHTS. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 26: TREE TRIMMER SHALL MEET THE FOLLOWING MIN REQUIREMENTS: OPERATING WEIGHT - 24, 300 LBS. NET POWER - 127 HP, 75' REACH FROM GROUND, AND COMPOSITE BOOM ELECTRICALLY INSULATED. THIS EQUIPMENT SHALL BE EQUIPPED WITH A FRONT- MOUNTED HYDRAULIC BLADE THAT IS CAPABLE OF BEING OPERATED FROM THE CAB OF THE MACHINE. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 27: SHALL BE COMPATIBLE WITH LINE ITEM # 1. TO BE USED ON TRACK EXCAVATOR WITH BOOM. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 28: SHALL MEET THE MINIMUM SPECIFICATIONS: Excavator must be diesel- powered, minimum 52 HP, minimum 15, 900 LB operating weight with operator. Equipped with rubber tracks, front- mounted push blade, reduced tail swing of 26 inches or less, and offset boom for mobility and confined workspace. Vendor must be able to provide various buckets between 18 IN to 52 IN wide, toothed and smooth buckets, with hydraulic grapple thumb attachment mounted on boom stick as needed. Vendor must be capable of providing 3 of these excavators at any time. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 29: X- Large Excavator w/Operator Hydraulic Tracked Excavator must be a minimum of 350 HP, diesel- powered, and have a minimum operating weight of 105, 000 lbs. Vendor capable of providing a minimum 48- inch- wide general- purpose bucket. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 30: HYDRAULIC BREAKER ATTACHMENT Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 31: SHALL MEET THE MINIMUM SPECIFICATIONS: TRUCK MOUNTED HYDRAULIC CRANE 55 TON W/OPERATOR, DIESEL POWERED 392 HP SINGLE ENGINE, 73, 000 POUND OPERATING WEIGHT, 110 FOOT BOOM LENGTH, 8X4X4 AXLE CONFIGURATION, MINIMUM LIFT CAPACITY OF 54. 5 TONS. ABILITY TO LIFT AND SWING 9. 1 TON 30' LONG CONCRETE BARRIER WALL AT A 40 FOOT FULL RADIUS. SUPPLY 1. 25 TO 2 CY CLAMSHELL BUCKET AS NEEDED TO DREDGE CHANNELS, REMOVE FLOOD DEBRIS, CLEAN MUD SLIDES FROM ROADWAYS, OR REMOVE AND LOAD TREES/BRUSH FROM RIVER BRIDGE PIERS. PRICE PER HOUR INCLUDES SUPPLYING AS NEEDED THE ABILITY TO PROVIDE BLOCKS, HOOKS, TAG LINES, RIGGING, CABLES, AND CRIBBING. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
Lot 32: Must be minimum 65 HP. Strike- off blade that can vary in length from 1 foot to at least 6 feet. 18- inch- wide variable- speed hydraulic drive conveyor system. Width of receiving hopper a minimum of 9 Ft. with a reinforced rubber bib. To be MIDLAND SPD- 6 Self Propelled or approved equivalent. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________
More bid opportunities are waiting for you!
Start your free 14-day trial to see all results and access the bid documents.
Search by what you sell
Illustrative example
Find bids beyond an exact phrase.
Choose an example to see how smart search can help.
You supply: Office chairs
How a solicitation might describe it
Supply of ergonomic seating for administrative work
The seating is described by its use, without repeating the product name.
Smart search helps connect what you supply with different descriptions. Try it with your own products during the free trial.
Start free trialYou supply: Pest control
How a solicitation might describe it
Insect and rodent management services
A different expression describes a related service.
Smart search helps connect what you supply with different descriptions. Try it with your own products during the free trial.
Start free trialYou supply: Toilet paper
How a solicitation might describe it
Supply of two-ply bathroom tissue
Another description of the product, including a purchasing specification.
Smart search helps connect what you supply with different descriptions. Try it with your own products during the free trial.
Start free trialFictional examples to explain how it works. This example does not run a search.
Tell us what you supply and see bids right away
-
Start with your email
Enter your email to start the free trial. There are no automatic charges.
-
Tell us what your business supplies
Add your specific products or services and the locations you want to search. Your first monitoring group is created for you.
-
See matching bids right away
Matching bids appear as soon as you save your products and locations. Explore groups and email settings at your own pace.
For teams and integrations
Send bid data into your CRM, BI or internal workflow via the Bid API, with JSON or XML output.
User testimonials
We selected the most helpful reviews from real users. Order may change periodically.
The idea of ​​using a keyword and sending the information by email is very good.
Smart search helped discover bids I hadn't even imagined receiving notifications for.
Excellent. More searches and many advantages.
Everything is perfect. They are a great help in finding bids relevant to our field of work. I really appreciate that the bids are sent directly to my email; it’s a huge help in identifying where I can contribute and what I can do.
All bids related to our product are captured by you and sent to us. In my opinion, it’s perfect—broad coverage and easy searches across the bid documents.
Very good and accurate information about the tenders: consistent and precise.
I like the way they provide information with the greatest possible accuracy. I love that.
I closed deals thanks to the information gathered by the search tool. There’s no need to research across multiple media outlets.
It is complete and optimal, it improves my time.
Excellent information. Just what I was looking for.
I consistently received notifications about bids within the specific segment I chose to monitor. The system simplifies processes that used to be complex, offering a navigation experience that is easy, fast, and modern.
You see a lot of tenders; you get emails with the alerts.
I liked the way they search for bids and provide us with the link to view them.
Why use BidHits for government bidding
Filter bids, save promising opportunities and ask questions about solicitation documents.
-
Filters and map
Filter by location, procurement type and value. View opportunities on the map to decide what deserves a closer look.
-
Favorites and notes
Save the bids that interest you and add private notes, so you can return to your review later.
-
Solicitation document assistant
Ask questions about documents the system can read. Check the answers against the solicitation documents and the official source.
Frequently asked questions
It is a government bid search service for the United States. Find opportunities related to what your business supplies, keep separate searches organized and receive email alerts.
Start with your email. Then add specific products or services and the locations you want to search. Your first monitoring group is created automatically, so you can get started without setting everything up.
No credit card is required and there are no automatic charges. Try the service for 14 days and choose a paid plan only if you decide to continue.
As soon as you save what you supply and your preferred locations, you can see matching bids on the site. Start with that list and explore filters and other tools at your own pace.
Official portals remain the source for solicitation documents and requirements. BidHits combines smart search, state filters, groups and alerts to help you spend less time sorting through notices. Try it with your own products and compare it with your current bid research.
They are separate searches for different parts of your business. You could have one called Well-equipped workplaces and another called Growing in Texas, each with its own products, services and locations. You choose the names. The number of groups depends on your trial or plan.
Every plan includes email alerts. The Essential plan sends alerts directly to your main email. The Professional and Advanced plans let you group email addresses into lists, such as Sales and Purchasing, then choose which list receives alerts from each monitoring group. Groups define what to track; lists define who receives it. Several groups can use the same list. List and additional email limits apply to the whole plan, not separately to each group or list.
Alerts send matching bids to your registered email according to the schedule available in your trial or plan. You can adjust email settings. Results appear on the site after you save your products and locations; emails follow the sending schedule. Where several daily sending times are available, the schedule applies across all groups and lists.
Use specific product or service names, such as office chairs. Smart search helps connect your offer with other descriptions, such as pest control and insect and rodent management. AI can make mistakes: check whether each opportunity is relevant and adjust your search terms when needed.
Filter by location, procurement type, dates and values, view opportunities on the map and save relevant bids as favorites. Add private notes so you can pick up your review later.
Yes. The AI assistant answers questions about documents the system can read, within the question limit for your trial or plan. It supports your review; check the answers against the solicitation documents and the official source.
Look for the document or official notice link in the opportunity. If the source portal requires a login or restricts direct access, you may need to open the procurement page and download the documents there.
If you do not choose a paid plan, the bid list becomes limited. Nothing is charged automatically. You decide whether to subscribe and continue with the features of your chosen plan.
Human support is available for questions about access, searches, monitoring groups and settings. Start with the basics and explore other tools at your own pace.
Yes. The API is included in the Professional and Advanced plans, with one key per account and a separate API request allowance shared across its sessions. See the API documentation.
See how it works
Start free trial
Add what you sell, get scheduled alerts, open documents or the official page, and use filters by region and method.
Transcript
Welcome to BidHits.
Finding public tenders and bids is important. But what really matters is quickly identifying the opportunities that match what your company sells.
To get started, enter a few keywords that describe your products or services. BidHits shows relevant opportunities, highlights your keywords, and organizes everything by date.
Smart search is already enabled and uses artificial intelligence to expand your results, even when the tender uses different words from the ones you searched for.
For each opportunity, you can view a summary, access documents, mark it as a favorite, add private notes, remove what is not relevant, or view it on the map.
You can also use filters, run searches, and explore the day's opportunities directly on the map.
Start using BidHits now. It's fast, practical, and you can try it for free.
AI Assistant
Ask me about the bid...
Loading summary...