BidHits™ uses cookies to provide an individualized service and care for the privacy and protection of shared data.
By browsing this site, we understand that you agree to the terms of our Privacy Policy.
Erection of a metal shelter at the prison Metal shelter 16 x 24 single slope roof 1/12 pitch, 16 eave height on low side south, 14 clear minimum, 26 gauge roof with no insulation, two walkways roughly 47 x 42 with single slope 1/12 pitch roof and minimum clear head room 84 on low side, clear span structure, gutters and downspouts with concrete splash guards, columns, framework, trusses, piers, all steel construction, concrete piers rated for structure, shop drawings, flashing, metal building meeting local codes for commercial metal buildings
AI helper
Sealed bids for erection of a metal shelter at the prison. Mandatory prebid meeting on October 20 at 11:15 AM at the prison, 200 South Vandenberg Drive, Moultrie, GA. Bids due November 2, 2026 at 10:20 AM. Must include 10% contingency. Contractor responsible for permits, disposal, locates, and OSHA compliance. Requires 5 years experience and proof of 5 previous jobs. Workmanship warranty of 20 years required. Bids must be sealed and marked Sealed Bid Prison Shelter Construction.
The metal building contractor shall provide a workmanship warranty of 20 years, as stated: metal building contractor shall provide a workmanship warranty of 20 years.
Bidders must have minimum 5 years of experience installing metal building systems and present proof of 5 previous jobs of the same scope.
The prebid meeting is mandatory: all potential bidders must attend a mandatory prebid meeting on ocotober 20 at 11: 15 am.
Bids not turned in by the called time will not be accepted: no bids will be accepted after the called time.
Erection of a shop warehouse Metal structure 50 x 100, 50 x 50 x 18 eave height insulated and enclosed area, 50 x 50 x 18 eave height open bay area with chain link fencing, minimum 26 gauge roof and siding, 3/12 pitch, dieformed ridge cap, clear span structures, divider wall, minimum 6 slab, two 14h x 14w commercial grade roll up doors, two 36 personnel doors, gutters and downspouts with concrete splash guards, concrete aprons, shop drawings, submittals, warranty details
AI helper
Colquitt County seeks sealed bids for erection of a shop warehouse. Mandatory prebid meeting on October 20 at 10:00 AM at 2020 County Farm Rd. , Moultrie, GA. Bids due November 2, 2026 at 10:00 AM. Must include 10% contingency. Contractor responsible for permits, materials, equipment, debris disposal, and locates. Requires 5 years experience, proof of 5 similar jobs, licensed and insured, workers comp, E-Verify, and bonds. 20-year workmanship warranty required.
Bids must be submitted by Monday, November 2, 2026 at 10:00 a. m. sealed bids will be accepted. . . until monday, november 2, 2026 at 10: 00 a. m.
Contractor must provide a 20-year workmanship warranty. metal building contractor shall provide a workmanship warranty of 20 years.
Bidders must have minimum 5 years experience installing metal building systems and provide proof of 5 previous jobs of the same scope. must have 5 years of experience and present proof of 5 previous jobs of the same scope
Mandatory prebid meeting and site visit required. all potential bidders must attend a mandatory prebid meeting on october 20 at 10: 00 am and mandatory site prebid visit required to participate in bid process
Bids not turned in by the called time will not be accepted. no bids will be accepted after the called time
Roof replacement Removal of existing metal roofing down to the roof deck, installation of new synthetic slate and metal roofing, snow guards, aluminum gutters, and downspouts.
AI helper
This is an invitation to bid for the roof replacement of the old Kent County Family Court. The project includes removing existing metal roofing and installing new synthetic slate and metal roofing, snow guards, aluminum gutters, and downspouts. A mandatory prebid meeting is scheduled for October 6, 2026, at 10:00 am. Sealed bids must be received by October 22, 2026, at 1:00 pm. Bids will be opened on October 22, 2026, at 2:00 pm. A bid security equivalent to ten percent of the bid amount is required.
Bids must be received by 1:00 pm local time on October 22, 2026. until 1: 00 pm local time on october 22, 2026.
Representatives of each party to any joint venture must attend this meeting. Representatives of each party to any joint venture must attend this meeting.
A mandatory prebid meeting will be held on October 6, 2026, at 10:00 am local time at the Kent County Family Court. a mandatory prebid meeting will be held on october 6, 2026 at 10: 00 am local time at the kentcounty family court
Mn- morris wmd- gutters and snow guards - mn- morris wmd- gutters and snow guards
AI helper
This document is a wage determination for construction work in Minnesota, specifically for gutters and snow guards repair or alteration of office buildings in Morris. It lists various prevailing wage classifications and rates according to Minnesota rules.
Gutter, Soffit, Fascia, Gutter Guard and Downspout Replacement - The contractor shall provide all labor, materials, equipment, supervision, permits, protection, disposal, and related services necessary to remove and replace the existing gutters, downspouts, soffit, and fascia at **** Wright Street. The work shall include installing gutter guards and relocating designated downspouts to improve roof drainage and direct water away from the building. The contractor shall field- verify all measurements, quantiti
AI helper
The contractor must provide all labor, materials, equipment, supervision, permits, protection, disposal, and related services to remove and replace existing gutters, downspouts, soffit, and fascia at **** Wright Street. The work includes installing gutter guards and relocating downspouts for improved roof drainage. Contractors must field-verify all measurements, quantities, existing conditions, drainage patterns, and proposed downspout locations before bidding. The bid opening date is ****.
We selected the most helpful reviews from real users. Order may change periodically.
All bids related to our product are captured by you and sent to us. In my opinion, it’s perfect—broad coverage and easy searches across the bid documents.
R. M. Ferreira
Very good and accurate information about the tenders: consistent and precise.
G. R. Ortiz
Excellent information. Just what I was looking for.
L. H. Borrelli
Good information. All the information is very good!
J. A. Tellez
I closed deals thanks to the information gathered by the search tool. There’s no need to research across multiple media outlets.
J. Comunale
You see a lot of tenders; you get emails with the alerts.
M. Camarasa
A very good platform.
D. C. Espinosa
The search engine that finds what I'm looking for just by entering keywords
J. P. L. Construccion
I consistently received notifications about bids within the specific segment I chose to monitor. The system simplifies processes that used to be complex, offering a navigation experience that is easy, fast, and modern.
G. P. da S. E. Guimaraes
I like the way they provide information with the greatest possible accuracy. I love that.
M. A. Neil
The tool is truly effective at scanning bid documents, efficiently delivering bids.
G. D. Reis
It encompasses all portals in one place.
G. Ferrea
It gives me information on bids that interest me. It's easy to find bids.
BidHits is a government bid search engine that monitors official portals and brings relevant federal, state and local opportunities into one place. You can search on the site and receive scheduled email alerts.
Enter your email and activate the trial. For 14 days you can use the main features, including alerts and access to results. When it ends, if you do not subscribe, the bid list becomes limited and you will not be charged automatically.
1) Add keywords that describe what you sell. 2) Start the trial. 3) Adjust regions, delivery times and email style after signup.
Whenever possible, yes. Some official portals require login or block direct links; in those cases we point you to the official process page so you can download the documents.
Yes. You can filter by region, procurement method, dates and value ranges. You can also save preferences for future alerts and searches.
Yes. In the dashboard you can see bids on a map and use it to plan follow-up by location.
It can happen. Smart Search uses your keywords to find related opportunities, not only exact matches. Add specific terms and remove off-topic results to improve future alerts.
Yes. You can query bids via API. Documentation at /api_integration.php. Ideal for CRM, BI and automations.
In Settings you can pause alerts or adjust delivery times. If you want to delete your account, just contact us. During the free trial there is no auto-charge.
We monitor major official sources every day at the federal, state and local levels. New bid notices are added as soon as they are captured from the source portal.
Add what you sell, get scheduled alerts, open documents or the official page, and use filters by region and method.
Transcript
Welcome to BidHits.
Finding public tenders and bids is important. But what really matters is quickly identifying the opportunities that match what your company sells.
To get started, enter a few keywords that describe your products or services. BidHits shows relevant opportunities, highlights your keywords, and organizes everything by date.
Smart search is already enabled and uses artificial intelligence to expand your results, even when the tender uses different words from the ones you searched for.
For each opportunity, you can view a summary, access documents, mark it as a favorite, add private notes, remove what is not relevant, or view it on the map.
You can also use filters, run searches, and explore the day's opportunities directly on the map.
Start using BidHits now. It's fast, practical, and you can try it for free.
AI Assistant
Ask me about the bid...
Loading summary...
Methodology
Unaided survey with 1110 active users, conducted through 10/28/2026.
Single question: "Would you recommend our services to a friend or colleague?" - 90% answered "yes".
™
