Bitumen Government Bids & RFPs

Lot 1: ONLY ONLINE BIDS WILL BE ACCEPTED FOR THIS RFB. Emailed and hard copies delivered by any method WILL NOT BE ACCEPTED. On this line, Bidders must enter $ 0. 00 for Contract Amount in the e- procurement system. Actual Contract Amount must be entered on " Official Bid Document" and submitted as an attachment in the e- procurement system. Vendors should review and update, if necessary, all addresses and contact persons for their account prior to bid submission. This information will carry forward to a contract if awarded, therefore please ensure all information is correct. Entire Official Bid Document and Bid Bond ( if required) should be combined as one PDF and uploaded The project consists of the removal and replacement of the existing roof systems. All areas are to be demolished down to the existing metal/concrete roof deck and replaced with new 2- ply modified bitumen roof membrane over 2 layers of 2. 2 rigid insulation & cover board. Tapered insulation shall be used at all drainage crickets & saddles & around the existing RTU. Masonry Repairs & through wall flashings under existing stone copings at parapets to be installed as noted.

Lot 1: ONLY ONLINE BIDS WILL BE ACCEPTED FOR THIS RFB. Emailed and hard copies delivered by any method WILL NOT BE ACCEPTED. On this line, Bidders must enter $ 0. 00 for Contract Amount in the e- procurement system. Actual Contract Amount must be entered on " Official Bid Document" and submitted as an attachment in the e- procurement system. Vendors should review and update, if necessary, all addresses and contact persons for their account prior to bid submission. This information will carry forward to a contract if awarded, therefore please ensure all information is correct. Entire Official Bid Document and Bid Bond ( if required) should be combined as one PDF and uploaded The goal of this project is to remove the existing roof system down to the existing roof deck and install a new Two- Ply SBS Modified Bitumen roof system. The new roof system is a Two- Ply SBS Modified Bitumen in cold adhesive over cover board over rigid board insulation system. The first layer of insulation will be mechanically fastened. Additional layers and coverboard will be set- in two- part foam adhesive. All existing prefinished metal coping caps, gutters, scupper collector heads, downspouts, roof drains, metal roof splashes, flashings, accessories, and terminations will be removed and replaced with new components.