South Dakota Purchading Group
Sealant/ Caulking Gun
Sioux Falls Canaries Stadium- Caulking
Bid Close Date:
Sealant Gun Government Bids & RFPs
Government bid alerts, regional filters, and fast access to documents
Monitor more sources with less manual work. 14-day free trial, no auto-charge.
90% recommend BidHits™ (1058 real users, 06/08/2026).
Methodology
Commonwealth Of Kentucky - Transportation - Office Of The Secretary- KY
Sealant/ Pneumatic Gun
Two- Part Silicone Sealant REBID
Bid Close Date:
Lot 1: This should come as a kit of two sausage cartridges ( part A and part B) that work with the dual sausage pneumatic gun. This product should conform to the Kentucky 2026 Standard Specification for Road and Bridge Specifications section ****( B). ****************************************************** *** ONLY ONLINE BIDS WILL BE ACCEPTED FOR THIS RFB. *** Emailed and hard copies delivered by any method WILL NOT BE ACCEPTED. See attached document How to Respond to an Online Bid through the Kentucky Vendor Self Service site ( updated). pdf. Please enter contact person, phone number and email in the Comments Section. Vendors should review and update, if necessary, all addresses and contact persons for their account prior to bid submission. This information will carry forward to a contract if awarded, therefore please ensure all information is correct.
Lot 2: This equipment is used to apply the two part ( parts A & B) sausage cartridges that make up the silicone sealant. The model should be the Albion **** which must be able to dispense dual component compounds.
Lot 3: This should be a two- component rapid curing liquid polymer. The material is used to form the edge of broken concrete and provide a surface for the two part silicone sealant to adhere. This material must cure to a dense, semi- flexible polymer that is resistant to chemicals, weather, abrasion, and impact. This should be the WaboCrete II. The WaboCrete ll product comes with part A activator ( 1/2 gal container), part B resin ( 1 gal container), and part C aggregate ( 5 gal container- 60 lbs).
Lot 4: This nozzle must fit on the Albion AT1500X. This nozzle is for one time use and then is disposed.
Lot 5: This material is needed to support the two part silicone sealant in the expansion joint until the sealant cures. This foam backer rod must be 2 1/2 in. in diameter and sold either in rolls or standard lengths.
Lot 6: This material is needed to support the two part silicone sealant in the expansion joint until the sealant cures. This foam backer rod must be 2 in. in diameter and sold either in rolls or standard lengths.
Lot 7: This material is needed to support the two- part silicone sealant in the expansion joint until the sealant cures. This foam backer rod must be 1 1/2 in. in diameter and sold either in rolls or standard lengths.
Lot 8: This material is needed to support the two- part silicone sealant in the expansion joint until the sealant cures. This foam backer rod must be 1 in. in diameter and sold either in rolls or standard lengths.
West Virginia Purchading Group
Hot Glue Gun/ Sealant Dispenser
Cimline K5 Series Tack Kettle and Trailer
Bid Close Date:
Commonwealth Of Kentucky - Transportation - Office Of The Secretary- KY
Sealant/ Caulking Gun/ Pneumatic Gun
Bid Close Date:
Lot 1: Two Part Rapid Cure Silicone Sealant. This should come as a kit of two 20oz sausage cartridges ( part A and part B) that work with the CBA- 600 dual sauage pneumatic gun. This product should be Dow Corning 902 RCS and conform to the Kentucky 2026 Standard Specification for Road and Bridge Specifications section ****( B). ************************************************** *** ONLY ONLINE BIDS WILL BE ACCEPTED FOR THIS RFB. *** Emailed and hard copies delivered by any method WILL NOT BE ACCEPTED. See attached document How to Respond to an Online Bid through the Kentucky Vendor Self Service site ( updated). pdf. Please enter contact person, phone number and email in the Comments Section. Vendors should review and update, if necessary, all addresses and contact persons for their account prior to bid submission. This information will carry forward to a contract if awarded, therefore please ensure all information is correct.
Lot 2: Self Leveling Silicone Sealant. This product should be packed as a 29 oz. cartridge to be used in a standard caulking gun. This product should be Dow Corning 890 and conform to the Kentucky 2026 Standard Specifications section ****( A).
Lot 3: Non- Self Leveling Silicone Sealant. This product should be packaged as a 29 oz. or 857 ml. cartridge to be used in a standard caulking gun. This product should be Dow Corning 888 and should be compatible with the Dow Corning 902 RCS.
Lot 5: Dual Sausage Pneumatic Gun ( 600HPS). This equipment is used to apply the two part ( parts A & B) 20 oz. sausage cartridges that make up the silicone sealant. The model should be the Cox CBA- 600S which must be able to dispense dual component compounds requiring 1: 1 mix ratio to application.
Lot 1: Two Part Rapid Cure Silicone Sealant. This should come as a kit of two 20oz sausage cartridges ( part A and part B) that work with the CBA- 600 dual sauage pneumatic gun. This product should be Dow Corning 902 RCS and conform to the Kentucky 2026 Standard Specification for Road and Bridge Specifications section ****( B). ************************************************** *** ONLY ONLINE BIDS WILL BE ACCEPTED FOR THIS RFB. *** Emailed and hard copies delivered by any method WILL NOT BE ACCEPTED. See attached document How to Respond to an Online Bid through the Kentucky Vendor Self Service site ( updated). pdf. Please enter contact person, phone number and email in the Comments Section. Vendors should review and update, if necessary, all addresses and contact persons for their account prior to bid submission. This information will carry forward to a contract if awarded, therefore please ensure all information is correct.
Lot 2: Self Leveling Silicone Sealant. This product should be packed as a 29 oz. cartridge to be used in a standard caulking gun. This product should be Dow Corning 890 and conform to the Kentucky 2026 Standard Specifications section ****( A).
Lot 3: Non- Self Leveling Silicone Sealant. This product should be packaged as a 29 oz. or 857 ml. cartridge to be used in a standard caulking gun. This product should be Dow Corning 888 and should be compatible with the Dow Corning 902 RCS.
Lot 4: Rapid Cure Silicone Primer Carboguard 635. This product should be packaged as a two- component gallon kit consisting of 0. 8 gallons of part A and 0. 2 gallons of part B. This product should be Carboline' s Carboguard 635. This product must be an all- purpose, immersion- grade epoxy for use on metals.
Lot 5: Dual Sausage Pneumatic Gun ( 600HPS). This equipment is used to apply the two part ( parts A & B) 20 oz. sausage cartridges that make up the silicone sealant. The model should be the Cox CBA- 600S which must be able to dispense dual component compounds requiring 1: 1 mix ratio to application.
Lot 6: Polymer Nosing System ( 1 gallon bottle, 1 bag aggregate). This should be a two- component rapid curing liquid polymer. The material is used to form the edge of broken concrete and provide a surface for the two- part silicone sealant to adhere. This material must cure to a dense, semi- flexible polymer that is resistant to chemicals, weather, abrasion, and impact. This should be Silspec 900 Polymer Nosing System. This is sold to repair 0. 5 cubic feet and comes as a kit consisting of a 1- gallon bottle of polymer liquid and 1 bag of Silspec blended aggregate.
Lot 7: 7/8" Mixing Nozzle for Pneumatic gun. This nozzle must fit on the Cox CBA- 600S Dual Sausage Pneumatic Gun. This nozzle is for one time use and then is disposed.
Lot 8: Foam Backer Rod ( 2 1/2" diameter). This material is needed to support the two- part silicone sealant in the expansion joint until the sealant cures. This foam backer rod must be 2 1/2 inches in diameter and sold either in rolls or standard lengths.
Lot 9: Foam Backer Rod ( 2" diameter). This material is needed to support the two- part silicone sealant in the expansion joint until the sealant cures. This foam backer rod must be 2 inches in diameter and sold either in rolls or standard lengths.
Lot 10: Foam Backer Rod ( 1 1/2" diameter). This material is needed to support the two- part silicone sealant in the expansion joint until the sealant cures. This foam backer rod must be 1 1/2 inches in diameter and sold either in rolls or standard lengths.
Lot 11: Foam Backer Rod ( 1" diameter). This material is needed to support the two- part silicone sealant in the expansion joint until the sealant cures. This foam backer rod must be 1 inch in diameter and sold either in rolls or standard lengths.
Delaware Purchading Group
Sealant/ Caulking Gun
Summit Campus Middle & High School Bid Pack 2 - Caulking
Bid Close Date:
More bid opportunities are waiting for you!
Start your free 14-day trial to see all results and access the bid documents.
Search live government bids & RFPs
See also
Why use BidHits™ for government bidding
-
One workflow for scattered portals
Monitor opportunities across federal, state and local sources without checking them one by one.
-
Alerts and documents in less time
Receive matching bids by email, then open documents or the official posting from one place.
-
Tools to focus your pipeline
Filter by region, method and value. Use favorites, notes and removals to keep only what matters.
For teams and integrations
Send bid data into your CRM, BI or internal workflow via the Bid API, with JSON or XML output.
Get bid alerts running in 3 simple steps
-
Tell us what you sell
Add keywords for your products or services. Smart Search helps catch related opportunities beyond exact matches.
-
Start the trial and receive alerts
Use the 14-day free trial and get email alerts with documents or official posting links.
-
Tune your feed
Adjust keywords, regions, email schedule and email style. Use map view and filters when you want to explore.
User testimonials
We selected the most helpful reviews from real users. Order may change periodically.
It is complete and optimal, it improves my time.
The tool is truly effective at scanning bid documents, efficiently delivering bids.
Excellent information. Just what I was looking for.
A complete, easy-to-use system. Support from calm, patient, and clear-teaching professionals.
It encompasses all portals in one place.
Excellent platform to help promote and expand the reach of your work.
Sending job opportunities via email is very good. Their information sources are rich in opportunities. The ease of use and advanced search options also make the work easier. The great advantage is the well-organized compilation that facilitates the search for opportunities.
Efficiency in search times.
I liked it — very easy to navigate. It’s the best one I’ve found.
The information helps me submit my bids on time for bids, and I also have readily available information on upcoming bids. So far, I am very satisfied with what I have received.
The platform is very user-friendly.
I’m absolutely delighted with the system’s performance so far. This software has exceeded all my expectations, ensuring that no crucial keyword, such as “cathodic protection” and others related, goes unnoticed. Its precision and efficiency are remarkable, providing extra peace of mind in our operations. I’m truly impressed by its effectiveness.
Frequently asked questions
BidHits™ is a government bid search engine that monitors official portals and brings relevant federal, state and local opportunities into one place. You can search on the site and receive scheduled email alerts.
Enter your email and activate the trial. For 14 days you can use the main features, including alerts and access to results. When it ends, if you do not subscribe at /subscription.php, the bid list becomes limited and you will not be charged automatically.
1) Add keywords that describe what you sell. 2) Start the trial. 3) Adjust regions, delivery times and email style after signup.
Whenever possible, yes. Some official portals require login or block direct links; in those cases we point you to the official process page so you can download the documents.
Yes. You can filter by region, procurement method, dates and value ranges. You can also save preferences for future alerts and searches.
Yes. In the dashboard you can see bids on a map and use it to plan follow-up by location.
It can happen. Smart Search uses your keywords to find related opportunities, not only exact matches. Add specific terms and remove off-topic results to improve future alerts.
Yes. You can query bids via API. Documentation at /api_integration.php. Ideal for CRM, BI and automations.
In Settings you can pause alerts or adjust delivery times. If you want to delete your account, just contact us. During the free trial there is no auto-charge.
We monitor major official sources every day at the federal, state and local levels. New bid notices are added as soon as they are captured from the source portal.
Plans start at $ 43.00/month. You can begin with a free trial and there is no auto-charge.
See how it works
Start free trial
Add what you sell, get scheduled alerts, open documents or the official page, and use filters by region and method.
Transcript
Welcome to BidHits™.
Finding public tenders and bids is important. But what really matters is quickly identifying the opportunities that match what your company sells.
To get started, enter a few keywords that describe your products or services. BidHits™ shows relevant opportunities, highlights your keywords, and organizes everything by date.
Smart search is already enabled and uses artificial intelligence to expand your results, even when the tender uses different words from the ones you searched for.
For each opportunity, you can view a summary, access documents, mark it as a favorite, add private notes, remove what is not relevant, or view it on the map.
You can also use filters, run searches, and explore the day's opportunities directly on the map.
Start using BidHits™ now. It's fast, practical, and you can try it for free.
AI Assistant
Ask me about the bid...
Loading summary...