Latest US Wash Iron Contracts & Bids

The Arizona Army National Guard is seeking a contractor to provide laundry services. The period of performance is from June 1, 2025 to May 31, 2030, with options for four additional years. Deliveries are required on the third Thursday of each month. The contractor must provide a point of contact and ensure all employees have necessary licenses. The government will evaluate contractor performance according to a quality assurance surveillance plan. Quotes are due by 5:00 PM Arizona time on June 30, 2025. A unique entity ID and CAGE code are required with the quote submission. Additional documents may be required, and there are specific holidays on which services are not required.

Lot 1: Dumor Model 71 Series Item# 71- 60PLC 6- foot Picnic Table, CDR PL, cedar planks and black frame - OR APPROVED EQUAL- Table dimensions: Overall: 71 long x 58 7/8 deep x 30 high Table and seat supports shall be 1 1/4 ( 1 5/8 OD) ASTM A513 schedule 40 steel tubing and 1 1/2 x 2 x 1/8 ASTM A36 steel angle. Table top assembly shall be manufactured from 1 ( 1 5/16 OD) ASTM A500 schedule 40 steel tubing, 3/16 thick ASTM A36 steel plate and 2 x 10 nominal HDPE recycled plastic slats. Anchoring: Stainless steel expansion anchors ( 1/2 x 3 3/4) provided. Powder Coating Finish: All parts are processed through an 8- stage iron phosphorous wash system. Parts are coated with a zinc- rich epoxy primer to an AVERAGE of 4- 5 mils. Parts are then finished with a top- coat of TGIC- polyester powder to an AVERAGE of 4- 5 mils. * Delivery only- installation is not needed. * Shipping is to be included in bid offer* Shipping address: Kentucky Department of Highways District 1 - Paducah District Office **** Ky Dam Road Paducah, ****
Lot 2: Dumor Model 71 Series Item# 71- 68- 1PLC WHLCHR Picnic Table, CDR PL, cedar planks and black frame. - OR APPROVED EQUAL- Table dimensions: ( ADA accessible table) Overall: 71 long x 58 7/8 deep x 30 high Table and seat supports shall be 1 1/4 ( 1 5/8 OD) ASTM A513 schedule 40 steel tubing and 1 1/2 x 2 x 1/8 ASTM A36 steel angle. Table top assembly shall be manufactured from 1 ( 1 5/16 OD) ASTM A500 schedule 40 steel tubing, 3/16 thick ASTM A36 steel plate and 2 x 10 nominal HDPE recycled plastic slats. Anchoring: Stainless steel expansion anchors ( 1/2 x 3 3/4) provided. Powder Coating Finish: All parts are processed through an 8- stage iron phosphorous wash system. Parts are coated with a zinc- rich epoxy primer to an AVERAGE of 4- 5 mils. Parts are then finished with a top- coat of TGIC- polyester powder to an AVERAGE of 4- 5 mils. * Delivery only- installation is not needed. * Shipping is to be included in bid offer* Shipping address: Kentucky Department of Highways District 1 - Paducah District Office **** Ky Dam Road Paducah, ****
Lot 3: Dumor Model Series Item# 71- 80PLC 8- foot Picnic Table, CDR PL, cedar planks and black frame - OR APPROVED EQUAL - Table dimensions: Overall: 95 long x 58 7/8 deep x 30 high. Table and seat supports shall be 1 1/4 ( 1 5/8 OD) ASTM A513 schedule 40 steel tubing and 1 1/2 x 2 x 1/8 ASTM A36 steel angle. Table top assembly shall be manufactured from 1 ( 1 5/16 OD) ASTM A500 schedule 40 steel tubing, 3/16 thick ASTM A36 steel plate and 2 x 10 nominal HDPE recycled plastic slats. Anchoring: Stainless steel expansion anchors ( 1/2 x 3 3/4) provided. Powder Coating Finish: All parts are processed through an 8- stage iron phosphorous wash system. Parts are coated with a zinc- rich epoxy primer to an AVERAGE of 4- 5 mils. Parts are then finished with a top- coat of TGIC- polyester powder to an AVERAGE of 4- 5 mils. * Delivery only- installation is not needed. * Shipping to be included in bid offer* Shipping address: Kentucky Department of Highways District 7 Roadside Maintenance Storage Facility **** Frankfort Court Lexington, ****
Lot 4: Dumor Model Series Item# 443- 82/S- 2, STL Picnic Table, Plates. - OR APPROVED EQUAL- Table Dimensions: Overall: 98 1/4 long x 83 3/4 deep x 30 high. Supports: Bench end supports shall be ASTM A48 Class 30 cast iron. Table supports shall be manufactured from 1 x 2 ASTM A36 steel flat bar. Seat Assembly: Seat straps shall be manufactured from 1/4 x 1 1/2 ASTM A36 carbon steel flat bar. Support pipes shall be manufactured from 2 ( 2 3/8 OD) ASTM A513 schedule 40 steel tubing. Pipe brace shall be manufactured from 3/4 ( 1 1/16 OD) ASTM A500 schedule 40 steel tubing. Table Assembly: Table straps shall be manufactured from 1/4 x 1 1/2 ASTM A36 carbon steel flat bar. Support pipes shall be manufactured from 2 ( 2 3/8 OD) ASTM A513 schedule 40 steel tubing. Pipe brace shall be manufactured from 3/4 ( 1 1/16 OD) ASTM A500 schedule 40 steel tubing. Anchoring: Stainless steel expansion anchors ( 1/2 x 3 3/4) provided. Powder Coating Finish: All parts are processed through an 8- stage iron phosphorous wash system. Parts are coated with a zinc- rich epoxy primer to an AVERAGE of 4- 5 mils. Parts are then finished with a top- coat of TGIC- polyester powder to an AVERAGE of 4- 5 mils. * Delivery only- installation is not needed. * Shipping to be included in bid offer* Shipping Address: Kentucky Department of Highways District 11 Roadside Maintenance Storage Facility Two Miles North of Manchester on US 421 Manchester, ****
Lot 6: Dumor Model 119 Series Item# 119- 80, 8- foot Cast Bench, STL Seat, 2 Arms, Color Black - OR APPROVED EQUAL- Bench dimensions: Overall: 100 1/4 long x 28 1/16 deep x 32 11/16 high. Supports: End Supports shall be ASTM A48 Class 30 cast iron. Seat Assembly: Seat straps shall be manufactured from 1/4 x 1 1/2 ASTM A36 carbon steel flat bar. Support pipes shall be manufactured from 2 ( 2 3/8 OD) ASTM A513 schedule 40 steel tubing. Pipe braces shall be manufactured from 3/4 ( 1 1/16 OD) ASTM A500 schedule 40 steel tubing. Anchoring: Stainless steel expansion anchors ( 1/2 x 3 3/4) provided. Powder Coating Finish: All parts are processed through an 8- stage iron phosphorous wash system. Parts are coated with a zinc- rich epoxy primer to an AVERAGE of 4- 5 mils. Parts are then finished with a top- coat of TGIC- polyester powder to an AVERAGE of 4- 5 mils. * Delivery only- installation is not needed. * Shipping to be included in bid offer* Shipping address: Kentucky Department of Highways District 3 Roadside Maintenance Storage Facility **** Three Springs Road Bowling Green, ****
Lot 8: Dumor Model Series Item# 71- 80PLC 8- foot Picnic Table, CDR PL, cedar planks and black frame - OR APPROVED EQUAL- Table dimensions: Overall: 95 long x 58 7/8 deep x 30 high. Table and seat supports shall be 1 1/4 ( 1 5/8 OD) ASTM A513 schedule 40 steel tubing and 1 1/2 x 2 x 1/8 ASTM A36 steel angle. Table top assembly shall be manufactured from 1 ( 1 5/16 OD) ASTM A500 schedule 40 steel tubing, 3/16 thick ASTM A36 steel plate and 2 x 10 nominal HDPE recycled plastic slats. Anchoring: Stainless steel expansion anchors ( 1/2 x 3 3/4) provided. Powder Coating Finish: All parts are processed through an 8- stage iron phosphorous wash system. Parts are coated with a zinc- rich epoxy primer to an AVERAGE of 4- 5 mils. Parts are then finished with a top- coat of TGIC- polyester powder to an AVERAGE of 4- 5 mils. * Delivery only- installation is not needed. * Shipping to be included in bid offer* Shipping address: Kentucky Department of Highways District 2 Roadside Maintenance Storage Facility **** North Main Street Madisonville, ****

The tender is for laundry services for the Arizona Army National Guard Central Issue Facility. The period of performance is from June 1, 2025 to May 31, 2030, with options for four additional years. Deliveries are required on the third Thursday of each month. The contractor must provide a point of contact and ensure all employees have necessary licenses. The government will evaluate contractor performance according to a quality assurance surveillance plan. Quotes are due by 5:00 PM Arizona time on June 30, 2025, via email to ***@***. *. * with TA50 laundry service **** in the subject line. The quote must include the unique entity ID and CAGE code. Additional requirements include compliance with installation regulations, security, and zero-tolerance policy regarding trafficking in persons. The contractor is responsible for ensuring their employees comply with all contract provisions.

Lot 1: Dumor Model 71 Series Item# 71- 60PLC 6- foot Picnic Table, CDR PL, cedar planks and black frame - OR APPROVED EQUAL- Table dimensions: Overall: 71 long x 58 7/8 deep x 30 high Table and seat supports shall be 1 1/4 ( 1 5/8 OD) ASTM A513 schedule 40 steel tubing and 1 1/2 x 2 x 1/8 ASTM A36 steel angle. Table top assembly shall be manufactured from 1 ( 1 5/16 OD) ASTM A500 schedule 40 steel tubing, 3/16 thick ASTM A36 steel plate and 2 x 10 nominal HDPE recycled plastic slats. Anchoring: Stainless steel expansion anchors ( 1/2 x 3 3/4) provided. Powder Coating Finish: All parts are processed through an 8- stage iron phosphorous wash system. Parts are coated with a zinc- rich epoxy primer to an AVERAGE of 4- 5 mils. Parts are then finished with a top- coat of TGIC- polyester powder to an AVERAGE of 4- 5 mils. * Delivery only- installation is not needed. * Shipping is to be included in bid offer*
Lot 2: Dumor Model 71 Series Item# 71- 68- 1PLC WHLCHR Picnic Table, CDR PL, cedar planks and black frame. - OR APPROVED EQUAL- Table dimensions: ( ADA accessible table) Overall: 71 long x 58 7/8 deep x 30 high Table and seat supports shall be 1 1/4 ( 1 5/8 OD) ASTM A513 schedule 40 steel tubing and 1 1/2 x 2 x 1/8 ASTM A36 steel angle. Table top assembly shall be manufactured from 1 ( 1 5/16 OD) ASTM A500 schedule 40 steel tubing, 3/16 thick ASTM A36 steel plate and 2 x 10 nominal HDPE recycled plastic slats. Anchoring: Stainless steel expansion anchors ( 1/2 x 3 3/4) provided. Powder Coating Finish: All parts are processed through an 8- stage iron phosphorous wash system. Parts are coated with a zinc- rich epoxy primer to an AVERAGE of 4- 5 mils. Parts are then finished with a top- coat of TGIC- polyester powder to an AVERAGE of 4- 5 mils. * Delivery only- installation is not needed. * Shipping is to be included in bid offer*
Lot 3: Dumor Model Series Item# 71- 80PLC 8- foot Picnic Table, CDR PL, cedar planks and black frame - OR APPROVED EQUAL - Table dimensions: Overall: 95 long x 58 7/8 deep x 30 high. Table and seat supports shall be 1 1/4 ( 1 5/8 OD) ASTM A513 schedule 40 steel tubing and 1 1/2 x 2 x 1/8 ASTM A36 steel angle. Table top assembly shall be manufactured from 1 ( 1 5/16 OD) ASTM A500 schedule 40 steel tubing, 3/16 thick ASTM A36 steel plate and 2 x 10 nominal HDPE recycled plastic slats. Anchoring: Stainless steel expansion anchors ( 1/2 x 3 3/4) provided. Powder Coating Finish: All parts are processed through an 8- stage iron phosphorous wash system. Parts are coated with a zinc- rich epoxy primer to an AVERAGE of 4- 5 mils. Parts are then finished with a top- coat of TGIC- polyester powder to an AVERAGE of 4- 5 mils. * Delivery only- installation is not needed. * Shipping to be included in bid offer*
Lot 4: Dumor Model Series Item# 443- 82/S- 2, STL Picnic Table, Plates. - OR APPROVED EQUAL- Table Dimensions: Overall: 98 1/4 long x 83 3/4 deep x 30 high. Supports: Bench end supports shall be ASTM A48 Class 30 cast iron. Table supports shall be manufactured from 1 x 2 ASTM A36 steel flat bar. Seat Assembly: Seat straps shall be manufactured from 1/4 x 1 1/2 ASTM A36 carbon steel flat bar. Support pipes shall be manufactured from 2 ( 2 3/8 OD) ASTM A513 schedule 40 steel tubing. Pipe brace shall be manufactured from 3/4 ( 1 1/16 OD) ASTM A500 schedule 40 steel tubing. Table Assembly: Table straps shall be manufactured from 1/4 x 1 1/2 ASTM A36 carbon steel flat bar. Support pipes shall be manufactured from 2 ( 2 3/8 OD) ASTM A513 schedule 40 steel tubing. Pipe brace shall be manufactured from 3/4 ( 1 1/16 OD) ASTM A500 schedule 40 steel tubing. Anchoring: Stainless steel expansion anchors ( 1/2 x 3 3/4) provided. Powder Coating Finish: All parts are processed through an 8- stage iron phosphorous wash system. Parts are coated with a zinc- rich epoxy primer to an AVERAGE of 4- 5 mils. Parts are then finished with a top- coat of TGIC- polyester powder to an AVERAGE of 4- 5 mils. * Delivery only- installation is not needed. * Shipping to be included in bid offer*
Lot 6: Dumor Model 119 Series Item# 119- 80, 8- foot Cast Bench, STL Seat, 2 Arms, Color Black - OR APPROVED EQUAL- Bench dimensions: Overall: 100 1/4 long x 28 1/16 deep x 32 11/16 high. Supports: End Supports shall be ASTM A48 Class 30 cast iron. Seat Assembly: Seat straps shall be manufactured from 1/4 x 1 1/2 ASTM A36 carbon steel flat bar. Support pipes shall be manufactured from 2 ( 2 3/8 OD) ASTM A513 schedule 40 steel tubing. Pipe braces shall be manufactured from 3/4 ( 1 1/16 OD) ASTM A500 schedule 40 steel tubing. Anchoring: Stainless steel expansion anchors ( 1/2 x 3 3/4) provided. Powder Coating Finish: All parts are processed through an 8- stage iron phosphorous wash system. Parts are coated with a zinc- rich epoxy primer to an AVERAGE of 4- 5 mils. Parts are then finished with a top- coat of TGIC- polyester powder to an AVERAGE of 4- 5 mils. * Delivery only- installation is not needed. * Shipping to be included in bid offer*
Lot 8: Dumor Model Series Item# 71- 80PLC 8- foot Picnic Table, CDR PL, cedar planks and black frame - OR APPROVED EQUAL- Table dimensions: Overall: 95 long x 58 7/8 deep x 30 high. Table and seat supports shall be 1 1/4 ( 1 5/8 OD) ASTM A513 schedule 40 steel tubing and 1 1/2 x 2 x 1/8 ASTM A36 steel angle. Table top assembly shall be manufactured from 1 ( 1 5/16 OD) ASTM A500 schedule 40 steel tubing, 3/16 thick ASTM A36 steel plate and 2 x 10 nominal HDPE recycled plastic slats. Anchoring: Stainless steel expansion anchors ( 1/2 x 3 3/4) provided. Powder Coating Finish: All parts are processed through an 8- stage iron phosphorous wash system. Parts are coated with a zinc- rich epoxy primer to an AVERAGE of 4- 5 mils. Parts are then finished with a top- coat of TGIC- polyester powder to an AVERAGE of 4- 5 mils. * Delivery only- installation is not needed. * Shipping to be included in bid offer*

The Arizona Army National Guard is seeking a contractor to provide laundry services. The period of performance is from June 1, 2025 to May 31, 2030, with options for four additional years. Deliveries are required on the third Thursday of each month. The contractor must provide a point of contact and ensure all employees have necessary licenses. Quotes are due by 5:00 PM Arizona time on June 30, 2025, via email to ***@***. *. * with TA50 laundry service **** in the subject line. The quote must include the unique entity ID and CAGE code. Additional requirements include compliance with installation access and security policies, and the contractor must not subcontract without prior written approval. The government will evaluate contractor performance according to a quality assurance surveillance plan. The contractor is responsible for ensuring their equipment and supplies are sufficient for the contract.