Latest US Zinc Contracts & Bids

This is a sources sought notice for market research, not a solicitation. The Department of Veterans Affairs, Montrose Medical Center, is seeking small business manufacturers or distributors of security fencing (brand name or equal to Ameristar, model Aegis II). Used or refurbished equipment is unacceptable. Delivery will be to the VA Hudson Valley Healthcare System's Food and Nutrition Service Department at the specified address. All responses must be sent to the email address provided. The NAICS code is 238990. The deadline for submission is July 9, 2025, at 4:00 PM EST.

This tender is for the procurement of 22 screw, cap, hex hd. The requirement is 100% set aside for small businesses. The evaluation factors include price, non-price factors (delivery lead time, past performance), and the government will issue an award to the responsible offeror whose quotation results in the best value. Applicable documents, drawings, and publications are listed. The contract quality requirements for the screw, cap, hex hd are detailed. The material must be mercury-free. The contractor is responsible for inspection requirements, and the government reserves the right to perform inspections. The supplier shall provide and maintain a quality system acceptable to the government, in accordance with ISO **** information for document references is provided. Additional information on ordering documents, specifications, and standards is included.

Lot 1: Dumor Model 71 Series Item# 71- 60PLC 6- foot Picnic Table, CDR PL, cedar planks and black frame - OR APPROVED EQUAL- Table dimensions: Overall: 71 long x 58 7/8 deep x 30 high Table and seat supports shall be 1 1/4 ( 1 5/8 OD) ASTM A513 schedule 40 steel tubing and 1 1/2 x 2 x 1/8 ASTM A36 steel angle. Table top assembly shall be manufactured from 1 ( 1 5/16 OD) ASTM A500 schedule 40 steel tubing, 3/16 thick ASTM A36 steel plate and 2 x 10 nominal HDPE recycled plastic slats. Anchoring: Stainless steel expansion anchors ( 1/2 x 3 3/4) provided. Powder Coating Finish: All parts are processed through an 8- stage iron phosphorous wash system. Parts are coated with a zinc- rich epoxy primer to an AVERAGE of 4- 5 mils. Parts are then finished with a top- coat of TGIC- polyester powder to an AVERAGE of 4- 5 mils. * Delivery only- installation is not needed. * Shipping is to be included in bid offer* Shipping address: Kentucky Department of Highways District 1 - Paducah District Office **** Ky Dam Road Paducah, ****
Lot 2: Dumor Model 71 Series Item# 71- 68- 1PLC WHLCHR Picnic Table, CDR PL, cedar planks and black frame. - OR APPROVED EQUAL- Table dimensions: ( ADA accessible table) Overall: 71 long x 58 7/8 deep x 30 high Table and seat supports shall be 1 1/4 ( 1 5/8 OD) ASTM A513 schedule 40 steel tubing and 1 1/2 x 2 x 1/8 ASTM A36 steel angle. Table top assembly shall be manufactured from 1 ( 1 5/16 OD) ASTM A500 schedule 40 steel tubing, 3/16 thick ASTM A36 steel plate and 2 x 10 nominal HDPE recycled plastic slats. Anchoring: Stainless steel expansion anchors ( 1/2 x 3 3/4) provided. Powder Coating Finish: All parts are processed through an 8- stage iron phosphorous wash system. Parts are coated with a zinc- rich epoxy primer to an AVERAGE of 4- 5 mils. Parts are then finished with a top- coat of TGIC- polyester powder to an AVERAGE of 4- 5 mils. * Delivery only- installation is not needed. * Shipping is to be included in bid offer* Shipping address: Kentucky Department of Highways District 1 - Paducah District Office **** Ky Dam Road Paducah, ****
Lot 3: Dumor Model Series Item# 71- 80PLC 8- foot Picnic Table, CDR PL, cedar planks and black frame - OR APPROVED EQUAL - Table dimensions: Overall: 95 long x 58 7/8 deep x 30 high. Table and seat supports shall be 1 1/4 ( 1 5/8 OD) ASTM A513 schedule 40 steel tubing and 1 1/2 x 2 x 1/8 ASTM A36 steel angle. Table top assembly shall be manufactured from 1 ( 1 5/16 OD) ASTM A500 schedule 40 steel tubing, 3/16 thick ASTM A36 steel plate and 2 x 10 nominal HDPE recycled plastic slats. Anchoring: Stainless steel expansion anchors ( 1/2 x 3 3/4) provided. Powder Coating Finish: All parts are processed through an 8- stage iron phosphorous wash system. Parts are coated with a zinc- rich epoxy primer to an AVERAGE of 4- 5 mils. Parts are then finished with a top- coat of TGIC- polyester powder to an AVERAGE of 4- 5 mils. * Delivery only- installation is not needed. * Shipping to be included in bid offer* Shipping address: Kentucky Department of Highways District 7 Roadside Maintenance Storage Facility **** Frankfort Court Lexington, ****
Lot 4: Dumor Model Series Item# 443- 82/S- 2, STL Picnic Table, Plates. - OR APPROVED EQUAL- Table Dimensions: Overall: 98 1/4 long x 83 3/4 deep x 30 high. Supports: Bench end supports shall be ASTM A48 Class 30 cast iron. Table supports shall be manufactured from 1 x 2 ASTM A36 steel flat bar. Seat Assembly: Seat straps shall be manufactured from 1/4 x 1 1/2 ASTM A36 carbon steel flat bar. Support pipes shall be manufactured from 2 ( 2 3/8 OD) ASTM A513 schedule 40 steel tubing. Pipe brace shall be manufactured from 3/4 ( 1 1/16 OD) ASTM A500 schedule 40 steel tubing. Table Assembly: Table straps shall be manufactured from 1/4 x 1 1/2 ASTM A36 carbon steel flat bar. Support pipes shall be manufactured from 2 ( 2 3/8 OD) ASTM A513 schedule 40 steel tubing. Pipe brace shall be manufactured from 3/4 ( 1 1/16 OD) ASTM A500 schedule 40 steel tubing. Anchoring: Stainless steel expansion anchors ( 1/2 x 3 3/4) provided. Powder Coating Finish: All parts are processed through an 8- stage iron phosphorous wash system. Parts are coated with a zinc- rich epoxy primer to an AVERAGE of 4- 5 mils. Parts are then finished with a top- coat of TGIC- polyester powder to an AVERAGE of 4- 5 mils. * Delivery only- installation is not needed. * Shipping to be included in bid offer* Shipping Address: Kentucky Department of Highways District 11 Roadside Maintenance Storage Facility Two Miles North of Manchester on US 421 Manchester, ****
Lot 6: Dumor Model 119 Series Item# 119- 80, 8- foot Cast Bench, STL Seat, 2 Arms, Color Black - OR APPROVED EQUAL- Bench dimensions: Overall: 100 1/4 long x 28 1/16 deep x 32 11/16 high. Supports: End Supports shall be ASTM A48 Class 30 cast iron. Seat Assembly: Seat straps shall be manufactured from 1/4 x 1 1/2 ASTM A36 carbon steel flat bar. Support pipes shall be manufactured from 2 ( 2 3/8 OD) ASTM A513 schedule 40 steel tubing. Pipe braces shall be manufactured from 3/4 ( 1 1/16 OD) ASTM A500 schedule 40 steel tubing. Anchoring: Stainless steel expansion anchors ( 1/2 x 3 3/4) provided. Powder Coating Finish: All parts are processed through an 8- stage iron phosphorous wash system. Parts are coated with a zinc- rich epoxy primer to an AVERAGE of 4- 5 mils. Parts are then finished with a top- coat of TGIC- polyester powder to an AVERAGE of 4- 5 mils. * Delivery only- installation is not needed. * Shipping to be included in bid offer* Shipping address: Kentucky Department of Highways District 3 Roadside Maintenance Storage Facility **** Three Springs Road Bowling Green, ****
Lot 8: Dumor Model Series Item# 71- 80PLC 8- foot Picnic Table, CDR PL, cedar planks and black frame - OR APPROVED EQUAL- Table dimensions: Overall: 95 long x 58 7/8 deep x 30 high. Table and seat supports shall be 1 1/4 ( 1 5/8 OD) ASTM A513 schedule 40 steel tubing and 1 1/2 x 2 x 1/8 ASTM A36 steel angle. Table top assembly shall be manufactured from 1 ( 1 5/16 OD) ASTM A500 schedule 40 steel tubing, 3/16 thick ASTM A36 steel plate and 2 x 10 nominal HDPE recycled plastic slats. Anchoring: Stainless steel expansion anchors ( 1/2 x 3 3/4) provided. Powder Coating Finish: All parts are processed through an 8- stage iron phosphorous wash system. Parts are coated with a zinc- rich epoxy primer to an AVERAGE of 4- 5 mils. Parts are then finished with a top- coat of TGIC- polyester powder to an AVERAGE of 4- 5 mils. * Delivery only- installation is not needed. * Shipping to be included in bid offer* Shipping address: Kentucky Department of Highways District 2 Roadside Maintenance Storage Facility **** North Main Street Madisonville, ****

This notice is for a firm fixed price contract for maintenance, repair, and preservation of a Bangor Caisson 1 Prime. The contract involves various tasks, including transport, tow, and delivery of the asset to and from the contractor's facility. The contractor's facility must be located in the Puget Sound, WA region. The proposal due date is June 27, 2025, at 12:00 PM PT. Offerors must be registered with the System for Award Management (SAM). Additional documents (Statement of Work, Price Proposal Worksheet, Drawings and References, CDRLS and DIDs) have been updated. The declining log attachment has been removed. Desired production start date is December 16, 2025, and desired caisson delivery completion date is June 17, 2026. Required production start date is March 16, 2026, and required caisson delivery completion date is September 17, 2026.