Latest US Recycled Wood Contracts & Bids

Luzerne County Community College is soliciting bids for furniture replacement at its main campus. Bids must be received by noon on Tuesday, May 27, 2025, in the college's purchasing department. The bid includes a detailed list of furniture items, quantities, and specifications. Bidders must comply with the college's general conditions, including delivery, assembly, and installation requirements. A 10% certified check or bid bond is required with each bid. Questions regarding the specifications should be directed to Natalie Staron, Vice President of Operations Facilities Management, by Friday, May 23, 2025. The college reserves the right to reject any or all bids. The award will be made to the lowest responsible bidder, based on criteria including promptness, faithfulness, capacity, and ability to complete the work according to plans and specifications. PA Act 153 background clearances are required for all contractor representatives who will be on campus.

This is a combined synopsis/solicitation for commercial supplies. Quotes are being requested for composite boards and posts for delivery to the US Fish and Wildlife Service, National Conservation Training Center. This is a total small business set-aside. Responsible small business sources may submit a quote. Award will be made to the lowest priced technically acceptable offer. Boards must be a composite of no less than 40% recycled materials. Vendors must submit documentation of applicable technical acceptability with their quote. Quotes are due 1/23/2025, **** EST, to thomas ***@***. *. * must be registered at SAM. gov as an active vendor by the time an award decision is necessary. Additional documents/materials description/brand for referencing boards are required. Time to delivery of all items and overall price are also required.

Lot 1: - DuMor # 502- 32TX- BT Exterior Trash cans- OR APPROVED EQUAL- SPECIFICATIONS: - Trash cans should have a receptacle body and cover. - The liner should have at least a thirty- two ( 32)- gallon capacity. - Expansion anchors should be provided. - All products must be 100% BLEACH cleanable to reduce the spread of infectious diseases. - Materials that needs to be used for the outdoor furniture is as follows: wood- grain recycled plastic slats, steel tubing, steel sheets, stainless steel, cast aluminum, steel plate, carbon steel flat bars, and steel expansion anchors. - All finished powder- coated parts should comply with the following ASTM methods for coating and coating method: ASTM- D- 523, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- B- 117, and ASSTM- D- ****- Minimum twenty ( 20)- year limited warranty on structural failure of frame, a ten ( 10)- year limited warranty on structural failure of recycled plastic, a five ( 5) year limited warranty against finish failure on all powder- coated products, and a one ( 1)- year limited warranty on all other items. SHIPPING IS TO BE INCLUDED IN BID OFFER. Bidders who propose alternate brands/specifications should enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non- responsive bid. If the brands are not changed, the contract will be written accordingly and the successful bidder shall be required to deliver the brand/specification stated in the solicitation.
Lot 2: - DuMor # 505- 60TX OUTDOOR BENCHES- OR APPROVED EQUAL- SPECIFICATIONS: - The seat height for outdoor benches should be approximately eighteen ( 18) inches. - Benches should be approximately seventy- five ( 75) inches wide, twenty- six ( 26) inches deep, and thirty- five ( 35) inches in height. - Benches should bear a weight capacity of seven hundred fifty ( 750) pounds. - All products must be 100% BLEACH cleanable to reduce the spread of infectious diseases. - Materials that needs to be used for the outdoor furniture is as follows: wood- grain recycled plastic slats, steel tubing, steel sheets, stainless steel, cast aluminum, steel plate, carbon steel flat bars, and steel expansion anchors. - All finished powder- coated parts should comply with the following ASTM methods for coating and coating method: ASTM- D- 523, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- B- 117, and ASSTM- D- ****- Minimum twenty ( 20)- year limited warranty on structural failure of frame, a ten ( 10)- year limited warranty on structural failure of recycled plastic, a five ( 5) year limited warranty against finish failure on all powder- coated products, and a one ( 1)- year limited warranty on all other items. SHIPPING IS TO BE INCLUDED IN BID OFFER. Bidders who propose alternate brands/specifications should enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non- responsive bid. If the brands are not changed, the contract will be written accordingly and the successful bidder shall be required to deliver the brand/specification stated in the solicitation.
Lot 3: - DuMor # 481- 20TX OUTDOOR CHAIRS- OR APPROVED EQUAL- SPECIFICATIONS: - The seat height for outdoor chairs should be approximately seventeen ( 17) inches. - The chairs should be approximately twenty- seven ( 27) inches wide and twenty- five ( 25) inches deep. - Chairs should bear a weight capacity of three hundred fifty ( 350) pounds. - All products must be 100% BLEACH cleanable to reduce the spread of infectious diseases. - Materials that needs to be used for the outdoor furniture is as follows: wood- grain recycled plastic slats, steel tubing, steel sheets, stainless steel, cast aluminum, steel plate, carbon steel flat bars, and steel expansion anchors. - All finished powder- coated parts should comply with the following ASTM methods for coating and coating method: ASTM- D- 523, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- B- 117, and ASSTM- D- ****- Minimum twenty ( 20)- year limited warranty on structural failure of frame, a ten ( 10)- year limited warranty on structural failure of recycled plastic, a five ( 5) year limited warranty against finish failure on all powder- coated products, and a one ( 1)- year limited warranty on all other items. SHIPPING IS TO BE INCLUDED IN BID OFFER. Bidders who propose alternate brands/specifications should enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non- responsive bid. If the brands are not changed, the contract will be written accordingly and the successful bidder shall be required to deliver the brand/specification stated in the solicitation.
Lot 4: - DuMor # 6B- 519TX- UMB OUTDOOR TABLES- OR APPROVED EQUAL- SPECIFICATIONS: - Outdoor tables should be approximately forty- eight ( 48) inches in diameter and thirty ( 30) inches in height. - Tables should have an umbrella hole in the center. - Expansion anchors should be provided. - All products must be 100% BLEACH cleanable to reduce the spread of infectious diseases. - Materials that needs to be used for the outdoor furniture is as follows: wood- grain recycled plastic slats, steel tubing, steel sheets, stainless steel, cast aluminum, steel plate, carbon steel flat bars, and steel expansion anchors. - All finished powder- coated parts should comply with the following ASTM methods for coating and coating method: ASTM- D- 523, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- B- 117, and ASSTM- D- ****- Minimum twenty ( 20)- year limited warranty on structural failure of frame, a ten ( 10)- year limited warranty on structural failure of recycled plastic, a five ( 5) year limited warranty against finish failure on all powder- coated products, and a one ( 1)- year limited warranty on all other items. SHIPPING IS TO BE INCLUDED IN BID OFFER. Bidders who propose alternate brands/specifications should enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non- responsive bid. If the brands are not changed, the contract will be written accordingly and the successful bidder shall be required to deliver the brand/specification stated in the solicitation.
Lot 5: - DuMor # 441- **** OUTDOOR PLANTERS- OR APPROVED EQUAL- SPECIFICATIONS: - Outdoor planters should be approximately twenty ( 20) to thirty ( 30) inches in height. - Expansion anchors should be provided. - All products must be 100% BLEACH cleanable to reduce the spread of infectious diseases. - Materials that needs to be used for the outdoor furniture is as follows: wood- grain recycled plastic slats, steel tubing, steel sheets, stainless steel, cast aluminum, steel plate, carbon steel flat bars, and steel expansion anchors. - All finished powder- coated parts should comply with the following ASTM methods for coating and coating method: ASTM- D- 523, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- B- 117, and ASSTM- D- ****- Minimum twenty ( 20)- year limited warranty on structural failure of frame, a ten ( 10)- year limited warranty on structural failure of recycled plastic, a five ( 5) year limited warranty against finish failure on all powder- coated products, and a one ( 1)- year limited warranty on all other items. SHIPPING IS TO BE INCLUDED IN BID OFFER. Bidders who propose alternate brands/specifications should enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non- responsive bid. If the brands are not changed, the contract will be written accordingly and the successful bidder shall be required to deliver the brand/specification stated in the solicitation.

Lot 1: - EXTERIOR TRASH CANS- SPECIFICATIONS: - Trash cans should have a receptacle body and cover. - The liner should have at least a thirty- two ( 32)- gallon capacity. - Expansion anchors should be provided. - All products must be 100% BLEACH cleanable to reduce the spread of infectious diseases. - Materials that needs to be used for the outdoor furniture is as follows: wood- grain recycled plastic slats, steel tubing, steel sheets, stainless steel, cast aluminum, steel plate, carbon steel flat bars, and steel expansion anchors. - All finished powder- coated parts should comply with the following ASTM methods for coating and coating method: ASTM- D- 523, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- B- 117, and ASSTM- D- ****- Minimum twenty ( 20)- year limited warranty on structural failure of frame, a ten ( 10)- year limited warranty on structural failure of recycled plastic, a five ( 5) year limited warranty against finish failure on all powder- coated products, and a one ( 1)- year limited warranty on all other items. SHIPPING IS TO BE INCLUDED IN BID OFFER.
Lot 2: - OUTDOOR BENCHES- SPECIFICATIONS: - The seat height for outdoor benches should be approximately eighteen ( 18) inches. - Benches should be approximately seventy- five ( 75) inches wide, twenty- six ( 26) inches deep, and thirty- five ( 35) inches in height. - Benches should bear a weight capacity of seven hundred fifty ( 750) pounds. - All products must be 100% BLEACH cleanable to reduce the spread of infectious diseases. - Materials that needs to be used for the outdoor furniture is as follows: wood- grain recycled plastic slats, steel tubing, steel sheets, stainless steel, cast aluminum, steel plate, carbon steel flat bars, and steel expansion anchors. - All finished powder- coated parts should comply with the following ASTM methods for coating and coating method: ASTM- D- 523, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- B- 117, and ASSTM- D- ****- Minimum twenty ( 20)- year limited warranty on structural failure of frame, a ten ( 10)- year limited warranty on structural failure of recycled plastic, a five ( 5) year limited warranty against finish failure on all powder- coated products, and a one ( 1)- year limited warranty on all other items. SHIPPING IS TO BE INCLUDED IN BID OFFER.
Lot 3: - OUTDOOR CHAIRS- SPECIFICATIONS: - The seat height for outdoor chairs should be approximately seventeen ( 17) inches. - The chairs should be approximately twenty- seven ( 27) inches wide and twenty- five ( 25) inches deep. - Chairs should bear a weight capacity of three hundred fifty ( 350) pounds. - All products must be 100% BLEACH cleanable to reduce the spread of infectious diseases. - Materials that needs to be used for the outdoor furniture is as follows: wood- grain recycled plastic slats, steel tubing, steel sheets, stainless steel, cast aluminum, steel plate, carbon steel flat bars, and steel expansion anchors. - All finished powder- coated parts should comply with the following ASTM methods for coating and coating method: ASTM- D- 523, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- B- 117, and ASSTM- D- ****- Minimum twenty ( 20)- year limited warranty on structural failure of frame, a ten ( 10)- year limited warranty on structural failure of recycled plastic, a five ( 5) year limited warranty against finish failure on all powder- coated products, and a one ( 1)- year limited warranty on all other items. SHIPPING IS TO BE INCLUDED IN BID OFFER.
Lot 4: - OUTDOOR TABLES- SPECIFICATIONS: - Outdoor tables should be approximately forty- eight ( 48) inches in diameter and thirty ( 30) inches in height. - Tables should have an umbrella hole in the center. - Expansion anchors should be provided. - All products must be 100% BLEACH cleanable to reduce the spread of infectious diseases. - Materials that needs to be used for the outdoor furniture is as follows: wood- grain recycled plastic slats, steel tubing, steel sheets, stainless steel, cast aluminum, steel plate, carbon steel flat bars, and steel expansion anchors. - All finished powder- coated parts should comply with the following ASTM methods for coating and coating method: ASTM- D- 523, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- B- 117, and ASSTM- D- ****- Minimum twenty ( 20)- year limited warranty on structural failure of frame, a ten ( 10)- year limited warranty on structural failure of recycled plastic, a five ( 5) year limited warranty against finish failure on all powder- coated products, and a one ( 1)- year limited warranty on all other items. SHIPPING IS TO BE INCLUDED IN BID OFFER.
Lot 5: - OUTDOOR PLANTERS- SPECIFICATIONS: - Outdoor planters should be approximately twenty ( 20) to thirty ( 30) inches in height. - Expansion anchors should be provided. - All products must be 100% BLEACH cleanable to reduce the spread of infectious diseases. - Materials that needs to be used for the outdoor furniture is as follows: wood- grain recycled plastic slats, steel tubing, steel sheets, stainless steel, cast aluminum, steel plate, carbon steel flat bars, and steel expansion anchors. - All finished powder- coated parts should comply with the following ASTM methods for coating and coating method: ASTM- D- 523, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- B- 117, and ASSTM- D- ****- Minimum twenty ( 20)- year limited warranty on structural failure of frame, a ten ( 10)- year limited warranty on structural failure of recycled plastic, a five ( 5) year limited warranty against finish failure on all powder- coated products, and a one ( 1)- year limited warranty on all other items. SHIPPING IS TO BE INCLUDED IN BID OFFER.

This is a combined synopsis/solicitation for commercial items. Quotes are requested for lumber and materials for an overlook rebuild. The anticipated required delivery date is within 60 days of contract award. All responsible small business sources may submit a quote. Award will be made as a firm fixed-price contract based on the tradeoff method, evaluating materials conforming to specifications and price. The offeror must visit the project site prior to submitting proposals. Quotes are due by 5 PM on 04/16/2025. Respondents must be registered at SAM. gov as an active vendor by the time quotes are due. Delivery location is Oahu/Maui NWR Complex, Honouliuli unit of the Pearl Harbor National Wildlife Refuge, EWA Beach, HI. Desired delivery date is by May 30, but no later than three months from contract acceptance. Normal duty hours are Monday through Thursday 8:00 AM to 4:30 PM, but the refuge is not staffed, so contractors will need to contact the POC to schedule delivery. Non-duty hours include weeknights, weekends, and government holidays. Additional documents required: quotation showing unit and total price on company letterhead or the enclosed **** form, SAM. gov UEI code, point of contact (phone number and email address). If the company holds a GSA contract that would apply to this requirement, please provide the contract number.