BidHits™
BidHits™

Shipping Method Government Bids & RFPs

Government bid alerts, regional filters, and fast access to documents

See also

90% recommend BidHits (1101 real users, 10/05/2026). Methodology

Last updated on 08/15/2026.

08/12/2026 - USA | OR | MULTNOMAH COUNTY | PORTLAND | 97207

Agriculture, Department Of- Forest Service- Usda- Fs, Csa Northwest 2

Epa Method 533/ Epa Method 537. 1

USFS R6 Drinking Water System PFAS Sampling and Analysis - This is a combined synopsis/solicitation for commercial services prepared in accordance with the format in Federal Acquisition Regulation ( FAR) Subpart 12. 6, as supplemented with additional information included in this notice. This announcement co

PFAS drinking water analysis Mail sample bottles, shipping materials, and return labels; Analyze drinking water samples; Compiled results

Bid Close Date:

Documents

08/06/2026 - USA | DC | DISTRICT OF COLUMBIA COUNTY | WASHINGTON

Homeland Security, Department Of- U. S. Customs And Border Protection- Air And Marine Contracting Division

Specialized Shipping Containers

Helium Certification - The DAPS Directorate requires a services- oriented contract that will provide directions and methodology for rehabilitation and requalification of helium tube trailers.

Helium tube trailer rehabilitation and requalification services Rehabilitation and requalification of helium tube trailers for TARS, TMSS, and TAS systems.

Documents

08/05/2026 - USA | KY | FRANKLIN COUNTY | FRANKFORT Small City

Commonwealth Of Kentucky - Transportation - Office Of The Secretary - KY

Pedestal and Bases - FEDERAL - REBID

Bid Close Date:

Documents

Lot 1: Pedestal pole with breakaway base & anchor bolts See section 1 for specifications. ONLY ONLINE BIDS WILL BE ACCEPTED FOR THIS RFB. Emailed and hard copies delivered by any method WILL NOT BE ACCEPTED. See attached document How to Respond to an Online Bid through the Kentucky Vendor Self Service site ( updated). pdf. Please enter contact person, phone number and email in the Comments Section. Vendors should review and update, if necessary, all addresses and contact persons for their account prior to bid submission. This information will carry forward to a contract if awarded, therefore please ensure all information is correct. POLE. Provide 4 and a half inch O. D. aluminum schedule 40 pipe to provide maximum of 9 feet overall mounting height. Provide a pole that meets or exceeds Component Products CPI- AP. BREAKAWAY BASE. Provide a breakaway base cast from 319 aluminum alloy. Provide base that has been tested and has accepted by the FHWA/KYTC in accordance with MASH ( look at FHWA website for manufacturers under Sign Supports, Mailboxes & Delineators): www. ***. *. * crash- severity). Provide a base that meets or exceeds Frey Manufacturing CP6 Series. Each door on the pedestal shall have a 3x 2 shock hazard sticker applied to the outside of the door. Install 3" from the top of the door. The sticker shall be metalcraft Ply695 prem stylemark label with . 007 thickness, with UV white Polycarbonate material, and with Mc53fl pressure sensitive adhesive or approval equal. See attachment for wording ANCHOR BOLTS. Use anchor bolts( Minimum 4) that conform to the requirement of ASTM F **** grade 105 for headed for Steel. Provide each anchor bolt with 2 galvanized hex nuts as well as one flat and one lock washer. Provide nuts that equal or exceed the proof load of the bolts strength. Provide bolts that are hot- dip galvanized to the requirements of either ASTM A 123 ( fabricated products) or ASTM A 153 ( hardware items). Protect anchor bolt threads from damage during shipping. You can use

Lot 1: Pedestal pole with breakaway base & anchor bolts See section 1 for specifications. ONLY ONLINE BIDS WILL BE ACCEPTED FOR THIS RFB. Emailed and hard copies delivered by any method WILL NOT BE ACCEPTED. See attached document How to Respond to an Online Bid through the Kentucky Vendor Self Service site ( updated). pdf. Please enter contact person, phone number and email in the Comments Section. Vendors should review and update, if necessary, all addresses and contact persons for their account prior to bid submission. This information will carry forward to a contract if awarded, therefore please ensure all information is correct. POLE. Provide 4 and a half inch O. D. aluminum schedule 40 pipe to provide maximum of 9 feet overall mounting height. Provide a pole that meets or exceeds Component Products CPI- AP. BREAKAWAY BASE. Provide a breakaway base cast from 319 aluminum alloy. Provide base that has been tested and has accepted by the FHWA/KYTC in accordance with MASH ( look at FHWA website for manufacturers under Sign Supports, Mailboxes & Delineators): www. ***. *. * crash- severity). Provide a base that meets or exceeds Frey Manufacturing CP6 Series. Each door on the pedestal shall have a 3x 2 shock hazard sticker applied to the outside of the door. Install 3" from the top of the door. The sticker shall be metalcraft Ply695 prem stylemark label with . 007 thickness, with UV white Polycarbonate material, and with Mc53fl pressure sensitive adhesive or approval equal. See attachment for wording ANCHOR BOLTS. Use anchor bolts( Minimum 4) that conform to the requirement of ASTM F **** grade 105 for headed for Steel. Provide each anchor bolt with 2 galvanized hex nuts as well as one flat and one lock washer. Provide nuts that equal or exceed the proof load of the bolts strength. Provide bolts that are hot- dip galvanized to the requirements of either ASTM A 123 ( fabricated products) or ASTM A 153 ( hardware items). Protect anchor bolt threads from damage during shipping. You can use

Lot 2: Pedestal breakaway base only BREAKAWAY BASE. Provide a breakaway base cast from 319 aluminum alloy. Provide base that has been tested and has accepted by the FHWA/KYTC in accordance with MASH ( look at FHWA website for manufacturers under Sign Supports, Mailboxes & Delineators): www. ***. *. * crash- severity). Provide a base that meets or exceeds Frey Manufacturing CP6 Series. Each door on the pedestal shall have a 3x 2 shock hazard sticker applied to the outside of the door. Install 3" from the top of the door. The sticker shall be metalcraft Ply695 prem stylemark label with . 007 thickness, with UV white Polycarbonate material, and with Mc53fl pressure sensitive adhesive or approval equal. See attachment for wording KYTC Warehouse ( T- 02- ****) FOR INTERNAL USE ONLY

Lot 3: Pedestal top mounting bracket one way Provide a slip Fitter Assembly 1- & 2- way Aluminum with necessary hardware. There shall be aluminum threaded plugs for openings not used by this bracket. Provide a pole that meets or exceeds PELCO Products Inc. SE- **** each whole bracket ( all hardware) in a single container or box. KYTC Warehouse ( T- 02- ****) FOR INTERNAL USE ONLY

Lot 4: Pedestal top mounting bracket 2- Way Provide a 2- way 16 and one- half inch CTC aluminum with necessary hardware. There shall be aluminum threaded plugs for any opening not used by this bracket. Provide a pole that meets or exceeds PELCO Products Inc. SE- **** each whole bracket ( all hardware) in a single container or box. KYTC Warehouse ( T- 02- ****) FOR INTERNAL USE ONLY

Lot 5: Post Top Provide a natural aluminum post top that can be securely attached to the pole that is 4 and one- half inch O. D. aluminum schedule 40 pipe. Package each post top ( all hardware) in a single container or box. KYTC Warehouse ( T- 02- ****) FOR INTERNAL USE ONLY

Lot 6: FSA Box Pole Mounted Provide a 4 holed pole mounted aluminum rectangular housing that is compatible with our standard pedestrian detector ( Polara rectangular Bulldog). Provide a natural aluminum painted surface. Provide all necessary hardware to seal the enclosure. This shall meet UL 514A. Package each FSA box ( all hardware) in a single container or box. KYTC Warehouse ( T- 06- ****) FOR INTERNAL USE ONLY

Lot 7: Pole Feet Aluminum hub plate for large pole with 1. 5- inch NPS. PELCO Products SE- **** or approved equal. Package each pole feet in a single container or box. KYTC Warehouse ( T- 02- ****) FOR INTERNAL USE ONLY

Lot 8: Pole Feet with conduit hub Aluminum hub plate with 1. 5- inch NPS with 1. 25- inch NPT conduit hub. There shall be an aluminum threaded plug for the conduit hub. PELCO Products SE- **** or approved equal. Package each pole feet with conduit hub in a single container or box. KYTC Warehouse ( T- 02- ****) FOR INTERNAL USE ONLY

07/29/2026 - USA | DC | DISTRICT OF COLUMBIA COUNTY | WASHINGTON

Health And Human Services, Department Of- Food And Drug Administration- Fda Office Of Acq Grant Svcs

In Vitro Methods

FDA Subcutaneous Injection Site Simulator ( SCISSOR) - FDA&# 39; s Division of Pharmaceutical Quality Research V ( DPQRV) requires a subcutaneous injection site simulator ( SCISSOR). Please see the attached PDF file titled FDA ****

Subcutaneous Injection Site Simulator ( SCISSOR) System Complete subcutaneous injection site simulator consisting of multiple independent chambers with integrated optical detection systems, automated sampling capabilities, and comprehensive software control for hardware operation and data management, including all shipping fees and delivery FOB destination.

Bid Close Date:

Documents

07/18/2026 - USA | VA | NORFOLK CITY COUNTY | NORFOLK Midsize City

Homeland Security, Department Of- U. S. Coast Guard- Sflc Procurement Branch 1( 00080)

DISPLAY PANEL - The United States Coast Guard Surface Forces Logistics Center has a requirement and requesting quotations for the following part: Item 1) NSN: ****- 12- 414- **** ITEM NAME: DISPLAY

Display panel Item 1) NSN: ****- 12- 414- ****, Item Name: Display Panel, OEM PN: ****, Mfg: Rolls Royce Solutions GmbH, Qty: 10ea. Descriptive spec data: Display unit used as part of the MTU **** series diesel engines on the 154 WPC vessels. PN has been superceded to **** and then to PN ****, new PN contains display ****, USB stick ****, modification manual CR **** requirements: Individually packaged in accordance with MIL STD ****- 1E Method 10, cushioned or secured to prevent movement or damage. Packed in an appropriately sized ASTM **** Type III, Class 1 wood cleated panelboard shipping box or ASTM **** Class 2 heavy duty screwed wooden box. Each package marked IAW MIL STD 129R, bar coded IAW ISO/IEC ****: ****, Code 39 symbology. Standard commercial packaging is unacceptable.

Bid Close Date:

Documents
More bid opportunities are waiting for you!
Start your free 14-day trial to see all results and access the bid documents.
Start free trial

Get bid alerts running in 3 simple steps

  1. Tell us what you sell

    Add keywords for your products or services. Smart Search helps catch related opportunities beyond exact matches.

  2. Start the trial and receive alerts

    Use the 14-day free trial and get email alerts with documents or official posting links.

  3. Tune your feed

    Adjust keywords, regions, email schedule and email style. Use map view and filters when you want to explore.

User testimonials
We selected the most helpful reviews from real users. Order may change periodically.
The tool is truly effective at scanning bid documents, efficiently delivering bids.
G. D. Reis
Excellent information. Just what I was looking for.
L. H. Borrelli
All bids related to our product are captured by you and sent to us. In my opinion, it’s perfect—broad coverage and easy searches across the bid documents.
R. M. Ferreira
The search engine that finds what I'm looking for just by entering keywords
J. P. L. Construccion
The idea of ​​using a keyword and sending the information by email is very good.
U. Solutions
I am very satisfied; it's a very useful tool.
J. S. Garcia
I consistently received notifications about bids within the specific segment I chose to monitor. The system simplifies processes that used to be complex, offering a navigation experience that is easy, fast, and modern.
G. P. da S. E. Guimaraes
I like the way they provide information with the greatest possible accuracy. I love that.
M. A. Neil
Well-focused searches and highly professional service. It’s been very useful, and hiring you was the right decision. With agility and confidence in our market segment, it’s driving our revenue growth.
O. O. Padron
Fast, flexible, and simple.
E. Disruptivas
You see a lot of tenders; you get emails with the alerts.
M. Camarasa
Practicality, speed, trust, and credibility—that’s what the work conveys. The information is precise and sharply targeted.
N. De Lima
It encompasses all portals in one place.
G. Ferrea
Start free trial

Why use BidHits for government bidding

Start free trial

For teams and integrations

Send bid data into your CRM, BI or internal workflow via the Bid API, with JSON or XML output.
View API documentation

Frequently asked questions

BidHits is a government bid search engine that monitors official portals and brings relevant federal, state and local opportunities into one place. You can search on the site and receive scheduled email alerts.

Enter your email and activate the trial. For 14 days you can use the main features, including alerts and access to results. When it ends, if you do not subscribe at /subscription.php, the bid list becomes limited and you will not be charged automatically.

1) Add keywords that describe what you sell. 2) Start the trial. 3) Adjust regions, delivery times and email style after signup.

Whenever possible, yes. Some official portals require login or block direct links; in those cases we point you to the official process page so you can download the documents.

Yes. You can filter by region, procurement method, dates and value ranges. You can also save preferences for future alerts and searches.

Yes. In the dashboard you can see bids on a map and use it to plan follow-up by location.

It can happen. Smart Search uses your keywords to find related opportunities, not only exact matches. Add specific terms and remove off-topic results to improve future alerts.

Yes. You can query bids via API. Documentation at /api_integration.php. Ideal for CRM, BI and automations.

In Settings you can pause alerts or adjust delivery times. If you want to delete your account, just contact us. During the free trial there is no auto-charge.

We monitor major official sources every day at the federal, state and local levels. New bid notices are added as soon as they are captured from the source portal.

Plans start at $ 43.00 per month, with options for different business needs and billing terms. Start with a free trial and evaluate the results before subscribing, with no automatic billing.
Start free trial

See how it works

Start free trial

Add what you sell, get scheduled alerts, open documents or the official page, and use filters by region and method.

Transcript
Welcome to BidHits. Finding public tenders and bids is important. But what really matters is quickly identifying the opportunities that match what your company sells. To get started, enter a few keywords that describe your products or services. BidHits shows relevant opportunities, highlights your keywords, and organizes everything by date. Smart search is already enabled and uses artificial intelligence to expand your results, even when the tender uses different words from the ones you searched for. For each opportunity, you can view a summary, access documents, mark it as a favorite, add private notes, remove what is not relevant, or view it on the map. You can also use filters, run searches, and explore the day's opportunities directly on the map. Start using BidHits now. It's fast, practical, and you can try it for free.
AI Assistant
Ask me about the bid...
Loading summary...