Interior, Department Of The- Bureau Of Reclamation- Denver Fed Center
XP POWER SUPPLIES ( Model ****) - Brand Name XP POWER SUPPLIES ( Model ****)
Power supply module for rotor turning test set ( RTTS) 400 a output minimum load of 0 a onboard, automatically controlled cooling fan must be a nonrack mount chassis no larger than 5x5 inches and no longer than 13 inches input and output terminals must be on the same side of the chassis must have an 8. 37 inch by 4. 0 inch 4bolt mounting pattern on one face that can accept m4 bolts for mounting into final product wbr **** template 1 efileb02 **** number: **** page 2 of 4 mounting bolt pattern must be offset from inputouput side of the chassis body by 5. 14 inches output must be flat bus stabs roughly flush with the chassis body and have two m5 threaded holes per polarity spaced 0. 55 inches along the stab output stabs must be spaced 1. 05 inches between each other control signal connector must be pin jst s30bphdss lf sn or equivalent to mate with pin jst phdr30vs or equivalent using contact sphd002tp0. 5 selection of pmbus or analog control mut be by provided internally with a pul
Bid Close Date: