Free Trial
Looking for bids...
Latest US Tracks Contracts & Bids
BidHits search is
Get daily public bidding opportunities delivered to your inbox:
Join the 90% of satisfied users!
BidHits has the most satisfied users.
90% recommendation, based on survey until 07/01/2025 with 897 real users.
90% recommendation
90% recommendation, based on survey until 07/01/2025 with 897 real users.
USA | AL | REDSTONE ARSENAL:DEPT OF DEFENSE- DEPT OF THE ARMY- AMC- ACC- ACC- CTRS- ACC RSA- W6QK ACC- RSA
AMENDMENT 001- Request for Proposal for Contractor Logistics Service ( CLS) and Contract Field Service Representative ( CFSR) Support, Country of Lebanon - Amendment 001 Tracks all interested parties&# 39; questions via Attachment **** on the contract. To see original Section B of RFP, please review original proposal. Offers are due on 01 August 2025 at **** or 5 pm CST.
Maint repair rebuild of equipment aircraft and airframe structural components maintenance, repair and rebuilding of equipment: aircraft and airframe structural components
Notice Summary
Documents
20 and 24- Foot Box Trailers
Lot 1: 20- foot box trailer - SPECIFICATIONS- Gross Vehicle Weight Rating ( GVWR): Minimum 14, 000 pounds. Size: Interior Net Height ( including beam width and lighting width): Minimum 7 feet, 4 inches ( 88 inches). Trailer Width: 8. 5 feet. Length: 20- foot box Both the 20- foot box and 24- foot box trailers to be built to work and look the same. Frame: Frame Type: Rectangular Tube. Frame Material: Aluminum ( Minimum 11 gauge for frame). Frame Configuration ( Spacing on Center): 12 inches of spacing. Nose Type: Flat. Tongue Option: A- Frame ( Extended). Front Jack Options: Electric. Ball Coupler: 2 5/16 inches. Wiring: Wire tubing around wires along the inside of frame. Roof: Rounded Aluminum with no seams. Seam: Aluminum ( Seamless). Vent: Minimum two ( 2) Vents Centered Vents must be hood covered and evenly distributed on center. Walls, Flooring, and Doors: Attachment Method: Screwless. Insulated walls, ceiling, and roof. Under Flooring Corrosion- Inhibiting Moisture Barrier. Rubber Tread Plate ( RTP) on interior floor and wheel wells. Skin Thickness: 0. 05 inches. Curb Side Door: Minimum 36 inches X 78 inches - forward placement. Rear Door Type: Heavy Duty Ramp Door with flap and extension Prefer gapless continuous hinge. Flooring Material: Aluminum. Axle, Suspension, Brake, and Tire: Number of Axles: Two ( 2) ( tandem) - 7, 000 pounds per axle. Type of Axles: Torsion. Brake System: Electric Tire Size: Must be ST235/80R16 Radial Tire Load Range: Minimum E- 10 ply rated. Spare tire and wheel must be included and the same as what on the trailer Cargo and Interior Area: E- Track t: Must be attached to frame by weld. Wall Locations: Three ( 3) recessed tracks the length of the entire wall - On center at 15 inches, 44 inches, 64 inches. Floor Locations: Three ( 3) recessed tracks - Entire length of floor - Placed on both outer edges and one on center. D- Rings: Attached to frame by weld. Floor Locations: Minimum six ( 6) recessed, 5, 000 pounds each, D- Ring anchors ( 2 - Front, 2 - On Center, 2 - Rear). Lighting: Inte
Lot 2: 24- foot box trailer - SPECIFICATIONS- Gross Vehicle Weight Rating ( GVWR): Minimum 14, 000 pounds. Size: Interior Net Height ( including beam width and lighting width): Minimum 7 feet, 4 inches ( 88 inches). Trailer Width: 8. 5 feet. Length: 24- foot box Both the 20- foot box and 24- foot box trailers to be built to work and look the same. Frame: Frame Type: Rectangular Tube. Frame Material: Aluminum ( Minimum 11 gauge for frame). Frame Configuration ( Spacing on Center): 12 inches of spacing. Nose Type: Flat. Tongue Option: A- Frame ( Extended). Front Jack Options: Electric. Ball Coupler: 2 5/16 inches. Wiring: Wire tubing around wires along the inside of frame. Roof: Rounded Aluminum with no seams. Seam: Aluminum ( Seamless). Vent: Minimum two ( 2) Vents Centered Vents must be hood covered and evenly distributed on center. Walls, Flooring, and Doors: Attachment Method: Screwless. Insulated walls, ceiling, and roof. Under Flooring Corrosion- Inhibiting Moisture Barrier. Rubber Tread Plate ( RTP) on interior floor and wheel wells. Skin Thickness: 0. 05 inches. Curb Side Door: Minimum 36 inches X 78 inches - forward placement. Rear Door Type: Heavy Duty Ramp Door with flap and extension Prefer gapless continuous hinge. Flooring Material: Aluminum. Axle, Suspension, Brake, and Tire: Number of Axles: Two ( 2) ( tandem) - 7, 000 pounds per axle. Type of Axles: Torsion. Brake System: Electric Tire Size: Must be ST235/80R16 Radial Tire Load Range: Minimum E- 10 ply rated. Spare tire and wheel must be included and the same as what on the trailer Cargo and Interior Area: E- Track: Must be attached to frame by weld. Wall Locations: Three ( 3) recessed tracks the length of the entire wall - On center at 15 inches, 44 inches, 64 inches. Floor Locations: Three ( 3) recessed tracks - Entire length of floor - Placed on both outer edges and one on center. D- Rings: Attached to frame by weld. Floor Locations: Minimum six ( 6) recessed, 5, 000 pounds each, D- Ring anchors ( 2 - Front, 2 - On Center, 2 - Rear). Lighting: Interi
Lot 2: 24- foot box trailer - SPECIFICATIONS- Gross Vehicle Weight Rating ( GVWR): Minimum 14, 000 pounds. Size: Interior Net Height ( including beam width and lighting width): Minimum 7 feet, 4 inches ( 88 inches). Trailer Width: 8. 5 feet. Length: 24- foot box Both the 20- foot box and 24- foot box trailers to be built to work and look the same. Frame: Frame Type: Rectangular Tube. Frame Material: Aluminum ( Minimum 11 gauge for frame). Frame Configuration ( Spacing on Center): 12 inches of spacing. Nose Type: Flat. Tongue Option: A- Frame ( Extended). Front Jack Options: Electric. Ball Coupler: 2 5/16 inches. Wiring: Wire tubing around wires along the inside of frame. Roof: Rounded Aluminum with no seams. Seam: Aluminum ( Seamless). Vent: Minimum two ( 2) Vents Centered Vents must be hood covered and evenly distributed on center. Walls, Flooring, and Doors: Attachment Method: Screwless. Insulated walls, ceiling, and roof. Under Flooring Corrosion- Inhibiting Moisture Barrier. Rubber Tread Plate ( RTP) on interior floor and wheel wells. Skin Thickness: 0. 05 inches. Curb Side Door: Minimum 36 inches X 78 inches - forward placement. Rear Door Type: Heavy Duty Ramp Door with flap and extension Prefer gapless continuous hinge. Flooring Material: Aluminum. Axle, Suspension, Brake, and Tire: Number of Axles: Two ( 2) ( tandem) - 7, 000 pounds per axle. Type of Axles: Torsion. Brake System: Electric Tire Size: Must be ST235/80R16 Radial Tire Load Range: Minimum E- 10 ply rated. Spare tire and wheel must be included and the same as what on the trailer Cargo and Interior Area: E- Track: Must be attached to frame by weld. Wall Locations: Three ( 3) recessed tracks the length of the entire wall - On center at 15 inches, 44 inches, 64 inches. Floor Locations: Three ( 3) recessed tracks - Entire length of floor - Placed on both outer edges and one on center. D- Rings: Attached to frame by weld. Floor Locations: Minimum six ( 6) recessed, 5, 000 pounds each, D- Ring anchors ( 2 - Front, 2 - On Center, 2 - Rear). Lighting: Interi
20 and 24- Foot Box Trailers
Lot 1: 20- foot box trailer - SPECIFICATIONS- Gross Vehicle Weight Rating ( GVWR): Minimum 14, 000 pounds. Size: Interior Net Height ( including beam width and lighting width): Minimum 7 feet, 4 inches ( 88 inches). Trailer Width: 8. 5 feet. Length: 20- foot box Both the 20- foot box and 24- foot box trailers to be built to work and look the same. Frame: Frame Type: Rectangular Tube. Frame Material: Aluminum ( Minimum 11 gauge for frame). Frame Configuration ( Spacing on Center): 12 inches of spacing. Nose Type: Flat. Tongue Option: A- Frame ( Extended). Front Jack Options: Electric. Ball Coupler: 2 5/16 inches. Wiring: Wire tubing around wires along the inside of frame. Roof: Rounded Aluminum with no seams. Seam: Aluminum ( Seamless). Vent: Minimum two ( 2) Vents Centered Vents must be hood covered and evenly distributed on center. Walls, Flooring, and Doors: Attachment Method: Screwless. Insulated walls, ceiling, and roof. Under Flooring Corrosion- Inhibiting Moisture Barrier. Rubber Tread Plate ( RTP) on interior floor and wheel wells. Skin Thickness: 0. 05 inches. Curb Side Door: Minimum 36 inches X 78 inches - forward placement. Rear Door Type: Heavy Duty Ramp Door with flap and extension Prefer gapless continuous hinge. Flooring Material: Aluminum. Axle, Suspension, Brake, and Tire: Number of Axles: Two ( 2) ( tandem) - 7, 000 pounds per axle. Type of Axles: Torsion. Brake System: Electric Tire Size: Must be ST235/80R16 Radial Tire Load Range: Minimum E- 10 ply rated. Spare tire and wheel must be included and the same as what on the trailer Cargo and Interior Area: E- Track t: Must be attached to frame by weld. Wall Locations: Three ( 3) recessed tracks the length of the entire wall - On center at 15 inches, 44 inches, 64 inches. Floor Locations: Three ( 3) recessed tracks - Entire length of floor - Placed on both outer edges and one on center. D- Rings: Attached to frame by weld. Floor Locations: Minimum six ( 6) recessed, 5, 000 pounds each, D- Ring anchors ( 2 - Front, 2 - On Center, 2 - Rear). Lighting: Inte
Lot 2: 24- foot box trailer - SPECIFICATIONS- Gross Vehicle Weight Rating ( GVWR): Minimum 14, 000 pounds. Size: Interior Net Height ( including beam width and lighting width): Minimum 7 feet, 4 inches ( 88 inches). Trailer Width: 8. 5 feet. Length: 24- foot box Both the 20- foot box and 24- foot box trailers to be built to work and look the same. Frame: Frame Type: Rectangular Tube. Frame Material: Aluminum ( Minimum 11 gauge for frame). Frame Configuration ( Spacing on Center): 12 inches of spacing. Nose Type: Flat. Tongue Option: A- Frame ( Extended). Front Jack Options: Electric. Ball Coupler: 2 5/16 inches. Wiring: Wire tubing around wires along the inside of frame. Roof: Rounded Aluminum with no seams. Seam: Aluminum ( Seamless). Vent: Minimum two ( 2) Vents Centered Vents must be hood covered and evenly distributed on center. Walls, Flooring, and Doors: Attachment Method: Screwless. Insulated walls, ceiling, and roof. Under Flooring Corrosion- Inhibiting Moisture Barrier. Rubber Tread Plate ( RTP) on interior floor and wheel wells. Skin Thickness: 0. 05 inches. Curb Side Door: Minimum 36 inches X 78 inches - forward placement. Rear Door Type: Heavy Duty Ramp Door with flap and extension Prefer gapless continuous hinge. Flooring Material: Aluminum. Axle, Suspension, Brake, and Tire: Number of Axles: Two ( 2) ( tandem) - 7, 000 pounds per axle. Type of Axles: Torsion. Brake System: Electric Tire Size: Must be ST235/80R16 Radial Tire Load Range: Minimum E- 10 ply rated. Spare tire and wheel must be included and the same as what on the trailer Cargo and Interior Area: E- Track: Must be attached to frame by weld. Wall Locations: Three ( 3) recessed tracks the length of the entire wall - On center at 15 inches, 44 inches, 64 inches. Floor Locations: Three ( 3) recessed tracks - Entire length of floor - Placed on both outer edges and one on center. D- Rings: Attached to frame by weld. Floor Locations: Minimum six ( 6) recessed, 5, 000 pounds each, D- Ring anchors ( 2 - Front, 2 - On Center, 2 - Rear). Lighting: Interi
Lot 2: 24- foot box trailer - SPECIFICATIONS- Gross Vehicle Weight Rating ( GVWR): Minimum 14, 000 pounds. Size: Interior Net Height ( including beam width and lighting width): Minimum 7 feet, 4 inches ( 88 inches). Trailer Width: 8. 5 feet. Length: 24- foot box Both the 20- foot box and 24- foot box trailers to be built to work and look the same. Frame: Frame Type: Rectangular Tube. Frame Material: Aluminum ( Minimum 11 gauge for frame). Frame Configuration ( Spacing on Center): 12 inches of spacing. Nose Type: Flat. Tongue Option: A- Frame ( Extended). Front Jack Options: Electric. Ball Coupler: 2 5/16 inches. Wiring: Wire tubing around wires along the inside of frame. Roof: Rounded Aluminum with no seams. Seam: Aluminum ( Seamless). Vent: Minimum two ( 2) Vents Centered Vents must be hood covered and evenly distributed on center. Walls, Flooring, and Doors: Attachment Method: Screwless. Insulated walls, ceiling, and roof. Under Flooring Corrosion- Inhibiting Moisture Barrier. Rubber Tread Plate ( RTP) on interior floor and wheel wells. Skin Thickness: 0. 05 inches. Curb Side Door: Minimum 36 inches X 78 inches - forward placement. Rear Door Type: Heavy Duty Ramp Door with flap and extension Prefer gapless continuous hinge. Flooring Material: Aluminum. Axle, Suspension, Brake, and Tire: Number of Axles: Two ( 2) ( tandem) - 7, 000 pounds per axle. Type of Axles: Torsion. Brake System: Electric Tire Size: Must be ST235/80R16 Radial Tire Load Range: Minimum E- 10 ply rated. Spare tire and wheel must be included and the same as what on the trailer Cargo and Interior Area: E- Track: Must be attached to frame by weld. Wall Locations: Three ( 3) recessed tracks the length of the entire wall - On center at 15 inches, 44 inches, 64 inches. Floor Locations: Three ( 3) recessed tracks - Entire length of floor - Placed on both outer edges and one on center. D- Rings: Attached to frame by weld. Floor Locations: Minimum six ( 6) recessed, 5, 000 pounds each, D- Ring anchors ( 2 - Front, 2 - On Center, 2 - Rear). Lighting: Interi
USA | IL | ROCK ISLAND COUNTY | ROCK ISLAND:DEPT OF DEFENSE- DEPT OF THE ARMY- AMC- ACC- ACC- CTRS- ACC RI- W6QK ACC- RI
20 and 24- Foot Box Trailers
Lot 1: 20- foot box trailer - SPECIFICATIONS- Gross Vehicle Weight Rating ( GVWR): Minimum 14, 000 pounds. Size: Interior Net Height ( including beam width and lighting width): Minimum 7 feet, 4 inches ( 88 inches). Trailer Width: 8. 5 feet. Length: 20- foot box Both the 20- foot box and 24- foot box trailers to be built to work and look the same. Frame: Frame Type: Rectangular Tube. Frame Material: Aluminum ( Minimum 11 gauge for frame). Frame Configuration ( Spacing on Center): 12 inches of spacing. Nose Type: Flat. Tongue Option: A- Frame ( Extended). Front Jack Options: Electric. Ball Coupler: 2 5/16 inches. Wiring: Wire tubing around wires along the inside of frame. Roof: Rounded Aluminum with no seams. Seam: Aluminum ( Seamless). Vent: Minimum two ( 2) Vents Centered Vents must be hood covered and evenly distributed on center. Walls, Flooring, and Doors: Attachment Method: Screwless. Insulated walls, ceiling, and roof. Under Flooring Corrosion- Inhibiting Moisture Barrier. Rubber Tread Plate ( RTP) on interior floor and wheel wells. Skin Thickness: 0. 05 inches. Curb Side Door: Minimum 36 inches X 78 inches - forward placement. Rear Door Type: Heavy Duty Ramp Door with flap and extension Prefer gapless continuous hinge. Flooring Material: Aluminum. Axle, Suspension, Brake, and Tire: Number of Axles: Two ( 2) ( tandem) - 7, 000 pounds per axle. Type of Axles: Torsion. Brake System: Electric Tire Size: Must be ST235/80R16 Radial Tire Load Range: Minimum E- 10 ply rated. Spare tire and wheel must be included and the same as what on the trailer Cargo and Interior Area: E- Track t: Must be attached to frame by weld. Wall Locations: Three ( 3) recessed tracks the length of the entire wall - On center at 15 inches, 44 inches, 64 inches. Floor Locations: Three ( 3) recessed tracks - Entire length of floor - Placed on both outer edges and one on center. D- Rings: Attached to frame by weld. Floor Locations: Minimum six ( 6) recessed, 5, 000 pounds each, D- Ring anchors ( 2 - Front, 2 - On Center, 2 - Rear). Lighting: Inte
Lot 2: 24- foot box trailer - SPECIFICATIONS- Gross Vehicle Weight Rating ( GVWR): Minimum 14, 000 pounds. Size: Interior Net Height ( including beam width and lighting width): Minimum 7 feet, 4 inches ( 88 inches). Trailer Width: 8. 5 feet. Length: 24- foot box Both the 20- foot box and 24- foot box trailers to be built to work and look the same. Frame: Frame Type: Rectangular Tube. Frame Material: Aluminum ( Minimum 11 gauge for frame). Frame Configuration ( Spacing on Center): 12 inches of spacing. Nose Type: Flat. Tongue Option: A- Frame ( Extended). Front Jack Options: Electric. Ball Coupler: 2 5/16 inches. Wiring: Wire tubing around wires along the inside of frame. Roof: Rounded Aluminum with no seams. Seam: Aluminum ( Seamless). Vent: Minimum two ( 2) Vents Centered Vents must be hood covered and evenly distributed on center. Walls, Flooring, and Doors: Attachment Method: Screwless. Insulated walls, ceiling, and roof. Under Flooring Corrosion- Inhibiting Moisture Barrier. Rubber Tread Plate ( RTP) on interior floor and wheel wells. Skin Thickness: 0. 05 inches. Curb Side Door: Minimum 36 inches X 78 inches - forward placement. Rear Door Type: Heavy Duty Ramp Door with flap and extension Prefer gapless continuous hinge. Flooring Material: Aluminum. Axle, Suspension, Brake, and Tire: Number of Axles: Two ( 2) ( tandem) - 7, 000 pounds per axle. Type of Axles: Torsion. Brake System: Electric Tire Size: Must be ST235/80R16 Radial Tire Load Range: Minimum E- 10 ply rated. Spare tire and wheel must be included and the same as what on the trailer Cargo and Interior Area: E- Track: Must be attached to frame by weld. Wall Locations: Three ( 3) recessed tracks the length of the entire wall - On center at 15 inches, 44 inches, 64 inches. Floor Locations: Three ( 3) recessed tracks - Entire length of floor - Placed on both outer edges and one on center. D- Rings: Attached to frame by weld. Floor Locations: Minimum six ( 6) recessed, 5, 000 pounds each, D- Ring anchors ( 2 - Front, 2 - On Center, 2 - Rear). Lighting: Interi
Lot 2: 24- foot box trailer - SPECIFICATIONS- Gross Vehicle Weight Rating ( GVWR): Minimum 14, 000 pounds. Size: Interior Net Height ( including beam width and lighting width): Minimum 7 feet, 4 inches ( 88 inches). Trailer Width: 8. 5 feet. Length: 24- foot box Both the 20- foot box and 24- foot box trailers to be built to work and look the same. Frame: Frame Type: Rectangular Tube. Frame Material: Aluminum ( Minimum 11 gauge for frame). Frame Configuration ( Spacing on Center): 12 inches of spacing. Nose Type: Flat. Tongue Option: A- Frame ( Extended). Front Jack Options: Electric. Ball Coupler: 2 5/16 inches. Wiring: Wire tubing around wires along the inside of frame. Roof: Rounded Aluminum with no seams. Seam: Aluminum ( Seamless). Vent: Minimum two ( 2) Vents Centered Vents must be hood covered and evenly distributed on center. Walls, Flooring, and Doors: Attachment Method: Screwless. Insulated walls, ceiling, and roof. Under Flooring Corrosion- Inhibiting Moisture Barrier. Rubber Tread Plate ( RTP) on interior floor and wheel wells. Skin Thickness: 0. 05 inches. Curb Side Door: Minimum 36 inches X 78 inches - forward placement. Rear Door Type: Heavy Duty Ramp Door with flap and extension Prefer gapless continuous hinge. Flooring Material: Aluminum. Axle, Suspension, Brake, and Tire: Number of Axles: Two ( 2) ( tandem) - 7, 000 pounds per axle. Type of Axles: Torsion. Brake System: Electric Tire Size: Must be ST235/80R16 Radial Tire Load Range: Minimum E- 10 ply rated. Spare tire and wheel must be included and the same as what on the trailer Cargo and Interior Area: E- Track: Must be attached to frame by weld. Wall Locations: Three ( 3) recessed tracks the length of the entire wall - On center at 15 inches, 44 inches, 64 inches. Floor Locations: Three ( 3) recessed tracks - Entire length of floor - Placed on both outer edges and one on center. D- Rings: Attached to frame by weld. Floor Locations: Minimum six ( 6) recessed, 5, 000 pounds each, D- Ring anchors ( 2 - Front, 2 - On Center, 2 - Rear). Lighting: Interi
Hiding multiple results. Take the free trial and see everything. Try Free
E-mail & API
Free trial with unlimited access! Get bid notifications via email at your convenience and browse directly on our site or through our API.
Artificial Intelligence
BidHits is the most innovative tender search engine on the market. Utilize our Artificial Intelligence to uncover opportunities beyond traditional search.
Try it free.
Discover BidHits
Increase your revenue by selling to the government.
Start here: finding Public Tenders
Discover the best bid search.
See also
Reviews from real users
Privacy Policy
| © 2011-2025 BidHits is a registered trademark of Portal Genial. All rights reserved.
BidHits is limited to the provision of bidding database maintenance service, not participating in the processes.
Some information may contain unintentional inaccuracies. Always consult the notice for each bid.
BidHits is limited to the provision of bidding database maintenance service, not participating in the processes.
Some information may contain unintentional inaccuracies. Always consult the notice for each bid.