BidHits uses cookies to provide an individualized service and care for the privacy and protection of shared data.
By browsing this site, we understand that you agree to the terms of our Privacy Policy.
Foot Cushion Government Bids & RFPs
Government bid alerts, regional filters, and fast access to documents
See also
90% recommend BidHits (1093 real users, 09/04/2026).Methodology
USA | NY | JEFFERSON COUNTY | FORT DRUM Small City
12 foot bat wing right side wing only - Fully welded top deck. Gearbox seal protection. 6- inch blade overlap. Welded top deck. Cut brush and saplings up to 3- inch. Must have a stump jumper, backed with a 1- inch thick mounting bar. Self- leveling pull- type hitch. Rear facing LED signal light
Batwing mower 12 foot bat wing right side wing only - fully welded top deck. gearbox seal protection. 6- inch blade overlap. welded top deck. cut brush and saplings up to 3- inch. must have a stump jumper, backed with a 1- inch thick mounting bar. self- leveling pull- type hitch. rear facing led signal light - **** miscellaneous service and trade equipment miscellaneous service and trade equipment fully welded top deck. gearbox seal protection. 6 inch blade overlap. welded top deck. cut brush and saplings up to 3 inch. must have a stump jumper, backed with a 1 inch thick mounting bar. self leveling pull type hitch. rear facing led signal lights. 1 right side hinged wing section. 1 inch solid hinge rods. wing transport lock. 1 inch enclosed front to rear dual leveling rods. 5 inch square rear axle tubing. 540 rpm: center: 17, 377 fpm 88. 3 mps, wings: 17, 329 fpm 88 **** rpm: center: 18, 165 fpm 92. 3 mps, wings: 18, 317 fpm 93. 1 mps. spring cushioned on center axle. bar tite hitch. 1 2 inch x 3 inch wel
AI helper
The procurement involves a batwing mower with specific features including a fully welded top deck, gearbox seal protection, 6-inch blade overlap, and the ability to cut brush and saplings up to 3 inches. It must include a stump jumper, a self-leveling pull-type hitch, and rear-facing LED signal lights. A 10-year limited gearbox warranty is mentioned.
A 10 year limited gearbox warranty is provided. 10 year limited gearbox warranty.
****- SBRT Immobilization Device - Special Notice Notice of Intent to Award a Sole Source Procurement The Department of Veterans Affairs ( VA), Veterans Health Administration ( VHA), Network Contracting Office ( NCO) 17, for the North Texas Veterans Health Care System in Dallas, Texas
SBRT Immobilization Device TotalRT Platform ( Platinum Package ****) including: TotalRT platform, MR Lokbar x4, Onebridge x2, One storage base x2, One respiratory belt, Wide respiratory plate, Comfortcare cushions x3, Hand pump, Clamlok cushion x2, Monarch overhead arm positioner, Type S Lokbar, T- shape Vaclok, Patient handle set, Flexlock knee support, Flexlock foot support, Feetfix cushion, Overlay stand.
AI helper
Notice of intent to award a sole source contract for an SBRT immobilization device (TotalRT Platform Platinum Package ****) to CQ Medical. Delivery to Audie L. Murphy Memorial VA Hospital, Dallas, TX. The VA anticipates awarding a contract on or about August 14, 2026, with a period of performance from August 14, 2026, through February 13, 2027. Interested responsible sources may submit a capability statement by August 5, 2026, 11:00 AM CST. Responses must include SAM UEI number and documentation of authorized service provider status. SDVOSB and VOSB must be verified on VIP database. Requirement restricted to US made products.
This is a notice of intent to award a sole source contract. A determination by the VA not to compete this proposed action based upon responses to this notice is solely within the discretion of the VA.
All respondents must have an active registration in the System for Award Management (SAM) at www. ***. *. * SDVOSB and VOSB must be listed as verified on the Vendor Information Pages (VIP) database at www. ***. *. * must include SAM UEI number and documentation that the vendor is an authorized service provider of the equipment listed.
All interested parties must submit information directly to ***@***. *. * no later than August 5, 2026 by 11:00 a. m. , CST.
Audiology exam chair, ophthalmic tables, refractor keratometer, portable operating microscope 1. Audiology exam chair with low lift, manual recline, solid aluminum construction, illuminated membrane switch control, multiposition articulating headrest, antiviral upholstery, foot pedal, single button folding armrests, and ergonomically contoured cushions. 2. Ophthalmic instrument table, adjustable height, synchronized legs, for two diagnostic eye instruments, wheelchair accessible, switch panel with LED display and 3 memory storage, 300 lb. capacity, 120v/60hz, casters, heavy duty powered legs, durable tabletop, anticollision safety system. 3. Automatic refractor keratometer, combined autorefractor, keratometer, and wavefront analyzer, tabletop, noncontact optical diagnostic system, 8. 5 inch color touchscreen, measurement ranges for spherical, cylindrical, axis, and keratometry, wavefront optical analysis, alignment imaging, data management connectivity. 4. Portable operating microscope, binocular stereoscopi
AI helper
This is a Sources Sought Notice for market research regarding audiology exam chairs, ophthalmic tables, refractor keratometers, and portable operating microscopes. The Department of Veterans Affairs is seeking information on potential sources capable of providing these products. Responses are due by July 1st, 2026, 5:00 PM CST. This is not a solicitation, and no contract will be awarded from this notice. Information requested includes company details, business size status, capabilities, and product information. Delivery is anticipated to the Harry S. Truman VA Medical Center Multispecialty CBOC Rolla, with initial delivery to an offsite warehouse at **** Vandiver Dr. , Columbia, MO ****, available June 1st, 2026 - May 31st, 2027. Initial outfitting and transition to the Rolla facility is estimated between November 2nd, 2026 - January 8th, 2027. White glove installation is required. A two-year manufacturer's warranty is expected.
Initial outfitting and transition to the Rolla facility is estimated between November 2nd, 2026 - January 8th, 2027. The warehouse will be available June 1st, 2026 - May 31st, 2027. initial outfitting transition and activation team will be responsible for delivery to rolla super cboc with estimated delivery dates are november 2nd, 2026 january 8th, 2027.
The contractor shall provide a manufacturer's two-year, free replacement warranty on units with normal wear and tear, including free return shipping, from date of delivery. the contractor shall provide a manufactures twoyear, free replacement warranty on units with normal wear and tear, including free return shipping, from date of delivery.
Responders must provide a capabilities statement that provides clear, compelling, and convincing evidence that their company can meet the requirements outlined in this sources sought. please submit a capabilities statement that provides clear, compelling, and convincing evidence that your company can meet the requirements outlined in this sources sought.
Doc CushionInsole - The Commonwealth Of Pennsylvania The Commonwealth Of Pennsylvania Department Of Corrections Requires A Vendor To Provide Cushion Insole Material At State Correctional Institution At Phoenix **** Mokychic Dr Collegeville Pa **** This Is An Electronic Bid Only Registered Vendors May Find Bid At Https Pasupplierportal State Pa Us Irj Portal Anonymous Only Electronic Bid Responses Will Be Accepted For Submission All Bidders Are Responsible For Monitoring The Dgs Emarketplace Website To
Cushion insole material Cushion insole material
AI helper
The Commonwealth of Pennsylvania, Department of Corrections, requires cushion insole material for the State Correctional Institution at Phoenix. This is a one-year contract with four one-year renewal options. The estimated initial first-year quantity is 30,000 sqft. Bidders must provide samples prior to award. Deliveries are accepted Monday-Friday, 8 am-1:30 pm ET, with a 48-hour appointment required. All orders must be palletized. Pricing must be firm for the initial year. Electronic bids only. Bids are due August 5, 2026, at 4:00 PM ET.
Deliveries can be made between 8 am and 1:30 pm Eastern Time, Monday through Friday, except Commonwealth holidays. An appointment must be made 48 hours before delivery. Deliveries can be made between the hours of 8 am 1. 30 pm eastern time, monday friday, except commonwealth holiday.
Contractors must accurately bill the Commonwealth for actual services rendered on all invoices and submit invoices within 10 business days of completed service. Accurately bill the Commonwealth for actual services rendered on all invoices. Submit invoice to appropriate resource account within 10 business days of completed service.
The Commonwealth reserves the right to award by item or on a total bid basis, whichever is deemed more advantageous. The commonwealth reserves the right to award by item or on a total bid basis, whichever is deemed more advantageous to the commonwealth.
Bidders must upload a signed worker protection form, reciprocal limitations act form, and an authorized dealer letter. Bidders must upload the following documents as part of a bid submission: signed worker protection form reciprocal limitations act form authorized dealer letter
Bidders are required to provide samples prior to award. Bidders are required to provide the sample prior to award.
If, after award, DOC determines that a product poses a security threat, DOC will either cancel the award or allow the contractor to replace the product with a compliant product. If, after award, doc determines that a product poses a security threat, doc will either cancel the award of that product upon written notification to the contractor detailing the nature of the security threat or allow the contractor to replace the product with a compliant product at the same price.
Audiology exam chair, ophthalmic tables, refractor keratometer, portable operating microscope 1. Audiology exam chair with low lift, manual recline, solid aluminum construction, illuminated membrane switch control, multiposition articulating headrest, antiviral upholstery, foot pedal, single button folding armrests, and ergonomically contoured cushions. 2. Ophthalmic instrument table, adjustable height, synchronized legs, for two diagnostic eye instruments, wheelchair accessible, switch panel with LED display and 3 memory storage, 300 lb. capacity, 120v/60hz, casters, heavy duty powered legs, durable tabletop, anticollision safety system. 3. Automatic refractor keratometer, combined autorefractor, keratometer, and wavefront analyzer, tabletop, noncontact optical diagnostic system, 8. 5 inch color touchscreen, measurement ranges for spherical, cylindrical, axis, and keratometry, wavefront optical analysis, alignment imaging, data management connectivity. 4. Portable operating microscope, binocular stereoscopi
AI helper
This is a Sources Sought Notice for market research regarding audiology exam chairs, ophthalmic tables, refractor keratometers, and portable operating microscopes. The Department of Veterans Affairs is seeking information on potential sources capable of providing these products. Responses are due by July 1st, 2026, 5:00 PM CST. This is not a solicitation, and no contract will be awarded from this notice. Information requested includes company details, business size status, capabilities, and product information. Delivery is anticipated to the Harry S. Truman VA Medical Center Multispecialty CBOC Rolla, with initial delivery to an offsite warehouse at **** Vandiver Dr. , Columbia, MO ****, available June 1st, 2026 - May 31st, 2027. Initial outfitting and transition to the Rolla facility is estimated between November 2nd, 2026 - January 8th, 2027. White glove installation is required. A two-year manufacturer's warranty is expected.
Initial outfitting and transition to the Rolla facility is estimated between November 2nd, 2026 - January 8th, 2027. The warehouse will be available June 1st, 2026 - May 31st, 2027. initial outfitting transition and activation team will be responsible for delivery to rolla super cboc with estimated delivery dates are november 2nd, 2026 january 8th, 2027.
The contractor shall provide a manufacturer's two-year, free replacement warranty on units with normal wear and tear, including free return shipping, from date of delivery. he contractor shall provide a manufactures twoyear, free replacement warranty on units with normal wear and tear, including free return shipping, from date of delivery.
Responders must provide a capabilities statement that provides clear, compelling, and convincing evidence that their company can meet the requirements outlined in this sources sought. please submit a capabilities statement that provides clear, compelling, and convincing evidence that your company can meet the requirements outlined in this sources sought.
Add keywords for your products or services. Smart Search helps catch related opportunities beyond exact matches.
2
Start the trial and receive alerts
Use the 14-day free trial and get email alerts with documents or official posting links.
3
Tune your feed
Adjust keywords, regions, email schedule and email style. Use map view and filters when you want to explore.
What our users say
All bids related to our product are captured by you and sent to us. In my opinion, it’s perfect—broad coverage and easy searches across the bid documents.
R. M. Ferreira
They deliver on their promises. The information is simple and straightforward.
G. G
They provide information on a wide and varied range of purchasing processes. All the necessary details are also included.
J. M. Defelitto
Very good and accurate information about the tenders: consistent and precise.
G. R. Ortiz
I consistently received notifications about bids within the specific segment I chose to monitor. The system simplifies processes that used to be complex, offering a navigation experience that is easy, fast, and modern.
We selected the most helpful reviews from real users. Order may change periodically.
I like the way they provide information with the greatest possible accuracy. I love that.
M. A. Neil
I closed deals thanks to the information gathered by the search tool. There’s no need to research across multiple media outlets.
J. Comunale
The platform is very user-friendly.
N. Lobato
Excellent information. Just what I was looking for.
L. H. Borrelli
The tool is truly effective at scanning bid documents, efficiently delivering bids.
G. D. Reis
The idea of ​​using a keyword and sending the information by email is very good.
U. Solutions
Very good and very clear information.
D. Ramos
It encompasses all portals in one place.
G. Ferrea
I liked the way they search for bids and provide us with the link to view them.
C. J. P. Perez
The search tool really works and satisfactorily meets our needs.
D. L. Cairuga
Sending job opportunities via email is very good. Their information sources are rich in opportunities. The ease of use and advanced search options also make the work easier. The great advantage is the well-organized compilation that facilitates the search for opportunities.
V. De Folga
Efficiency in search times.
R. Chavez
You see a lot of tenders; you get emails with the alerts.
BidHits is a government bid search engine that monitors official portals and brings relevant federal, state and local opportunities into one place. You can search on the site and receive scheduled email alerts.
Enter your email and activate the trial. For 14 days you can use the main features, including alerts and access to results. When it ends, if you do not subscribe at /subscription.php, the bid list becomes limited and you will not be charged automatically.
1) Add keywords that describe what you sell. 2) Start the trial. 3) Adjust regions, delivery times and email style after signup.
Whenever possible, yes. Some official portals require login or block direct links; in those cases we point you to the official process page so you can download the documents.
Yes. You can filter by region, procurement method, dates and value ranges. You can also save preferences for future alerts and searches.
Yes. In the dashboard you can see bids on a map and use it to plan follow-up by location.
It can happen. Smart Search uses your keywords to find related opportunities, not only exact matches. Add specific terms and remove off-topic results to improve future alerts.
Yes. You can query bids via API. Documentation at /api_integration.php. Ideal for CRM, BI and automations.
In Settings you can pause alerts or adjust delivery times. If you want to delete your account, just contact us. During the free trial there is no auto-charge.
We monitor major official sources every day at the federal, state and local levels. New bid notices are added as soon as they are captured from the source portal.
Plans start at $ 43.00 per month, with options for different business needs and billing terms. Start with a free trial and evaluate the results before subscribing, with no automatic billing.
Add what you sell, get scheduled alerts, open documents or the official page, and use filters by region and method.
Transcript
Welcome to BidHits.
Finding public tenders and bids is important. But what really matters is quickly identifying the opportunities that match what your company sells.
To get started, enter a few keywords that describe your products or services. BidHits shows relevant opportunities, highlights your keywords, and organizes everything by date.
Smart search is already enabled and uses artificial intelligence to expand your results, even when the tender uses different words from the ones you searched for.
For each opportunity, you can view a summary, access documents, mark it as a favorite, add private notes, remove what is not relevant, or view it on the map.
You can also use filters, run searches, and explore the day's opportunities directly on the map.
Start using BidHits now. It's fast, practical, and you can try it for free.
AI Assistant
Ask me about the bid...
Loading summary...
Methodology
Unaided survey with 1093 active users, conducted through 09/04/2026.
Single question: "Would you recommend our services to a friend or colleague?" - 90% answered "yes".
