Lot 1: Dumor Model 71 Series Item# 71- 60PLC 6- foot Picnic Table, CDR PL, cedar planks and black frame - OR APPROVED EQUAL- Table dimensions: Overall: 71
long x 58 7/8 deep x 30 high Table and seat supports shall be 1 1/4 ( 1 5/8 OD) ASTM A513 schedule 40 steel tubing and 1 1/2 x 2 x 1/8 ASTM A36 steel angle. Table top assembly shall be manufactured from 1 ( 1 5/16 OD) ASTM A500 schedule 40 steel tubing, 3/16 thick ASTM A36 steel plate and 2 x 10 nominal HDPE recycled plastic slats.
Anchoring: Stainless steel expansion anchors ( 1/2 x 3 3/4) provided. Powder Coating Finish: All parts are processed through an 8- stage iron phosphorous wash system. Parts are coated with a zinc- rich epoxy primer to an AVERAGE of 4- 5 mils. Parts are then finished with a top- coat of TGIC- polyester powder to an AVERAGE of 4- 5 mils. * Delivery only- installation is not needed. * Shipping is to be included in bid offer* Shipping address: Kentucky Department of Highways District 1 - Paducah District Office **** Ky Dam Road Paducah, ****
Lot 2: Dumor Model 71 Series Item# 71- 68- 1PLC WHLCHR Picnic Table, CDR PL, cedar planks and black frame. - OR APPROVED EQUAL- Table dimensions: ( ADA accessible table) Overall: 71
long x 58 7/8 deep x 30 high Table and seat supports shall be 1 1/4 ( 1 5/8 OD) ASTM A513 schedule 40 steel tubing and 1 1/2 x 2 x 1/8 ASTM A36 steel angle. Table top assembly shall be manufactured from 1 ( 1 5/16 OD) ASTM A500 schedule 40 steel tubing, 3/16 thick ASTM A36 steel plate and 2 x 10 nominal HDPE recycled plastic slats.
Anchoring: Stainless steel expansion anchors ( 1/2 x 3 3/4) provided. Powder Coating Finish: All parts are processed through an 8- stage iron phosphorous wash system. Parts are coated with a zinc- rich epoxy primer to an AVERAGE of 4- 5 mils. Parts are then finished with a top- coat of TGIC- polyester powder to an AVERAGE of 4- 5 mils. * Delivery only- installation is not needed. * Shipping is to be included in bid offer* Shipping address: Kentucky Department of Highways District 1 - Paducah District Office **** Ky Dam Road Paducah, ****
Lot 3: Dumor Model Series Item# 71- 80PLC 8- foot Picnic Table, CDR PL, cedar planks and black frame - OR APPROVED EQUAL - Table dimensions: Overall: 95
long x 58 7/8 deep x 30 high. Table and seat supports shall be 1 1/4 ( 1 5/8 OD) ASTM A513 schedule 40 steel tubing and 1 1/2 x 2 x 1/8 ASTM A36 steel angle. Table top assembly shall be manufactured from 1 ( 1 5/16 OD) ASTM A500 schedule 40 steel tubing, 3/16 thick ASTM A36 steel plate and 2 x 10 nominal HDPE recycled plastic slats.
Anchoring: Stainless steel expansion anchors ( 1/2 x 3 3/4) provided. Powder Coating Finish: All parts are processed through an 8- stage iron phosphorous wash system. Parts are coated with a zinc- rich epoxy primer to an AVERAGE of 4- 5 mils. Parts are then finished with a top- coat of TGIC- polyester powder to an AVERAGE of 4- 5 mils. * Delivery only- installation is not needed. * Shipping to be included in bid offer* Shipping address: Kentucky Department of Highways District 7 Roadside Maintenance Storage Facility **** Frankfort Court Lexington, ****
Lot 4: Dumor Model Series Item# 443- 82/S- 2, STL Picnic Table, Plates. - OR APPROVED EQUAL- Table Dimensions: Overall: 98 1/4
long x 83 3/4 deep x 30 high. Supports:
Bench end supports shall be ASTM A48 Class 30 cast iron. Table supports shall be manufactured from 1 x 2 ASTM A36 steel flat bar. Seat Assembly: Seat straps shall be manufactured from 1/4 x 1 1/2 ASTM A36 carbon steel flat bar. Support pipes shall be manufactured from 2 ( 2 3/8 OD) ASTM A513 schedule 40 steel tubing. Pipe brace shall be manufactured from 3/4 ( 1 1/16 OD) ASTM A500 schedule 40 steel tubing. Table Assembly: Table straps shall be manufactured from 1/4 x 1 1/2 ASTM A36 carbon steel flat bar. Support pipes shall be manufactured from 2 ( 2 3/8 OD) ASTM A513 schedule 40 steel tubing. Pipe brace shall be manufactured from 3/4 ( 1 1/16 OD) ASTM A500 schedule 40 steel tubing.
Anchoring: Stainless steel expansion anchors ( 1/2 x 3 3/4) provided. Powder Coating Finish: All parts are processed through an 8- stage iron phosphorous wash system. Parts are coated with a zinc- rich epoxy primer to an AVERAGE of 4- 5 mils. Parts are then finished with a top- coat of TGIC- polyester powder to an AVERAGE of 4- 5 mils. * Delivery only- installation is not needed. * Shipping to be included in bid offer* Shipping Address: Kentucky Department of Highways District 11 Roadside Maintenance Storage Facility Two Miles North of Manchester on US 421 Manchester, ****
Lot 6: Dumor Model 119 Series Item# 119- 80, 8- foot Cast
Bench, STL Seat, 2 Arms, Color Black - OR APPROVED EQUAL-
Bench dimensions: Overall: 100 1/4
long x 28 1/16 deep x 32 11/16 high. Supports: End Supports shall be ASTM A48 Class 30 cast iron. Seat Assembly: Seat straps shall be manufactured from 1/4 x 1 1/2 ASTM A36 carbon steel flat bar. Support pipes shall be manufactured from 2 ( 2 3/8 OD) ASTM A513 schedule 40 steel tubing. Pipe braces shall be manufactured from 3/4 ( 1 1/16 OD) ASTM A500 schedule 40 steel tubing.
Anchoring: Stainless steel expansion anchors ( 1/2 x 3 3/4) provided. Powder Coating Finish: All parts are processed through an 8- stage iron phosphorous wash system. Parts are coated with a zinc- rich epoxy primer to an AVERAGE of 4- 5 mils. Parts are then finished with a top- coat of TGIC- polyester powder to an AVERAGE of 4- 5 mils. * Delivery only- installation is not needed. * Shipping to be included in bid offer* Shipping address: Kentucky Department of Highways District 3 Roadside Maintenance Storage Facility **** Three Springs Road Bowling Green, ****
Lot 8: Dumor Model Series Item# 71- 80PLC 8- foot Picnic Table, CDR PL, cedar planks and black frame - OR APPROVED EQUAL- Table dimensions: Overall: 95
long x 58 7/8 deep x 30 high. Table and seat supports shall be 1 1/4 ( 1 5/8 OD) ASTM A513 schedule 40 steel tubing and 1 1/2 x 2 x 1/8 ASTM A36 steel angle. Table top assembly shall be manufactured from 1 ( 1 5/16 OD) ASTM A500 schedule 40 steel tubing, 3/16 thick ASTM A36 steel plate and 2 x 10 nominal HDPE recycled plastic slats.
Anchoring: Stainless steel expansion anchors ( 1/2 x 3 3/4) provided. Powder Coating Finish: All parts are processed through an 8- stage iron phosphorous wash system. Parts are coated with a zinc- rich epoxy primer to an AVERAGE of 4- 5 mils. Parts are then finished with a top- coat of TGIC- polyester powder to an AVERAGE of 4- 5 mils. * Delivery only- installation is not needed. * Shipping to be included in bid offer* Shipping address: Kentucky Department of Highways District 2 Roadside Maintenance Storage Facility **** North Main Street Madisonville, ****