™Dept Of Defense- Defense Logistics Agency- Dla Aviation- Dla Av Richmond- Dla Aviation
Wear Protection Strip
15-- wear strip -
Wear Protection Government Bids & RFPs
Government bid alerts, regional filters, and fast access to documents
See also
90% recommend BidHits (1104 real users, 10/09/2026).
Methodology
Columbus Consolidated Government - GA
Body Protection/ Protective Wear
PROTECTIVE FIRE CLOTHING AND ACCESSORIES ( ANNUAL CONTRACT) - It is the intent of the Columbus Consolidated Government ( the City) to establish an annual contract with a Primary and a Secondary contractor to provide firefighters with body protection against extreme temperature, sharp objects, steam water penetration, hot particles, and other hazards encountered during structural firefighting. These items will be procured on an " as needed" basis and are to be utilized by the Columbus Fire & EMS Department a
protective fire clothing and accessories body protection against extreme temperature, sharp objects, steam water penetration, hot particles, and other hazards encountered during structural firefighting
Bid Close Date:
Renville County - MN
SAP 065- 603- 016- Bridge ****, CSAH 3, & SAP 065- 627- 016 - Bridge ****, CSAH 27
Bid Close Date:
Lot 1: Remove pipe drain
Lot 2: Sawing bituminous pavement ( full depth)
Lot 3: Remove bituminous pavement
Lot 4: Aggregatesurfacing, class 1
Lot 5: Aggregate base, class 5
Lot 6: Type sp 12. 5 wearing course mixture ( 2, b)
Lot 7: Type sp 12. 5 non- wearing course mixture ( 2, b)
Lot 8: Remove existing bridge
Lot 9: Granular backfill
Lot 10: 18 cs pipe apron
Lot 11: 18 cs pipe culvert
Lot 12: Storm drain inlet protection
Lot 13: Filter berm, type 5
Lot 14: Sediment control log trype straw
Lot 15: Rapid stabilization method 4
Lot 16: Mobilization
Lot 17: 12' x 11' precast concrete box culvert end section
Lot 18: 12' x 11' precast concrete box culvert
Lot 19: Granular backfill
Lot 20: Pipe bedding material
Lot 21: RANDOM RIPRAP, CLASS Ill
Lot 22: Lean mix backfill
Lot 23: Traffic control
Lot 24: Remove pipe drain
Lot 25: Sawing bituminous pavement ( full depth)
Lot 26: Remove bituminous pavement
Lot 27: Aggregate surfacing, class 1
Lot 28: Aggregate base, class 5
Lot 29: Type sp 12. 5 wearing course mixture ( 2, 8)
Lot 30: Type sp 12. 5 non- wearing course mixture ( 2, 8)
Lot 31: Remove existing bridge
Lot 32: Granular backfill
Lot 33: 18 cs pipe apron
Lot 34: 18 cs pipe culvert
Lot 35: 36 cs pipe culvert
Lot 36: Connect to existing storm pipe
Lot 37: Storm drain inlet protection
Lot 38: Filter berm, type 5
Lot 39: Sediment control log trype straw
Lot 40: Rapid stabilization method 4
Lot 41: Mobilization
Lot 42: 14' x 12' precast concrete box culvert end section
Lot 43: 14' x 12' precast concrete box culvert
Lot 44: Granular backfill
Lot 45: Pipe bedding material
Lot 46: RANDOM RIPRAP, CLASS Ill
Lot 47: Lean mix backfill
Lot 48: Traffic control
Veterans Affairs, Department Of- Veterans Affairs, Department Of- Sac Frederick ( 36C10X)
Ballistic Protection/ Covert Wear
NOTICE OF INTENT TO SOLICIT DIRECTLY FROM SUPPLIERS FOR CONCEALABLE BODY ARMOR T- SHIRT SYSTEMS - NOTICE OF INTENT TO SOLICIT DIRECTLY FROM SUPPLIERS FOR CONCEALABLE BODY ARMOR T- SHIRT SYSTEMS. In accordance with RFO ****( c)( 2), the U. S. Department of Veteran Affairs ( VA) is soliciting quotes directly from s
Concealable body armor t shirt system Complete concealable body armor t shirt system consisting of a low profile compression style t shirt carrier, and front and back, nij certified soft armor inserts panels.
Bid Close Date:
County Of Monmouth - NJ
Furnish and deliver gloves ( nitrile, work and utility) for various monmouth county departments on- call, as needed for the period january 1, 2027 through december 31, 2027
Bid Close Date:
Lot 36: Leather work gloves safety cuff split cowhide, kevlar stitched leather- wrapped fingertips knuckle strap for abrasion protection double palm with extra layer of leather in high- wear areas cotton back absorbent fleece lining sewn into thumb and forefinger glove leather grade: a gunn cut thumb style: wing not insulated size: large
Lot 37: Leather work gloves safety cuff split cowhide, kevlar stitched leather- wrapped fingertips knuckle strap for abrasion protection double palm with extra layer of leather in high- wear areas cotton back absorbent fleece lining sewn into thumb and forefinger glove leather grade: a gunn cut thumb style: wing not insulated size: x large
Lot 1: Lined rubber gloves, size: small
Lot 2: Lined rubber gloves, size: medium
Lot 3: Lined rubber gloves, size: large
Lot 4: Poly disposable gloves, 1. 25 mil. , size: medium, no powder
Lot 5: Poly disposable gloves, 1. 25 mil. , size: large, no powder
Lot 6: Nitrile disposable gloves, 5 mil. , size: ( s) small, no powder ** samples required at time of bid for this item
Lot 7: Nitrile disposable gloves, 5 mil. , size: ( m) medium, no powder ** samples required at time of bid for this item
Lot 8: Nitrile disposable gloves, 5 mil. , size: ( l) large, no powder ** samples required at time of bid for this item
Lot 9: Nitrile disposable gloves, 5 mil. , size: ( xl) extra large, no powder ** samples required at time of bid for this item
Lot 10: Nitrile disposable gloves, 5 mil. , size: ( xxl) extra, extra large, no powder ** samples required at time of bid for this item
Lot 11: Nitrile disposable gloves, black, 5 mil. Medical grade/food grade unpowdered 9. 5" long textured finish fda approved ambidextrous size: s ** samples required at time of bid for this item
Lot 12: Nitrile disposable gloves, black, 5 mil. Medical grade/food grade unpowdered 9. 5" long textured finish fda approved ambidextrous size: m ** samples required at time of bid for this item
Lot 13: Nitrile disposable gloves, black, 5 mil. Medical grade/food grade unpowdered 9. 5" long textured finish fda approved ambidextrous size: l ** samples required at time of bid for this item
Lot 14: Nitrile disposable gloves, black, 5 mil. Medical grade/food grade unpowdered 9. 5" long textured finish fda approved ambidextrous size: xl ** samples required at time of bid for this item
Lot 15: Nitrile disposable gloves, black, 5 mil. Medical grade/food grade unpowdered 9. 5" long textured finish fda approved ambidextrous size: xxl ** samples required at time of bid for this item
Lot 16: Nitrile disposable gloves, 5 mil. , 11" long, size: ( m) medium, powder free ** samples required at time of bid for this item
Lot 17: Nitrile disposable gloves, 5 mil. , 11" long, size: ( l) large, powder free ** samples required at time of bid for this item
Lot 18: Nitrile disposable gloves, 5 mil. , 11" long, size: ( xl) extra- large, powder free ** samples required at time of bid for this item
Lot 19: Nitrile disposable gloves, black, 6 mil. ( minimum thickness throughout, no exceptions) exam grade non- latex powder free beaded/textured grip heavy duty/industrial/automotive service size: medium ** samples required at time of bid for this item
Lot 20: Nitrile disposable gloves, black, 6 mil. ( minimum thickness throughout, no exceptions) exam grade non- latex powder free beaded/textured grip heavy duty/industrial/automotive service size: large ** samples required at time of bid for this item
Lot 21: Nitrile disposable gloves, black, 6 mil. ( minimum thickness throughout, no exceptions) exam grade non- latex powder free beaded/textured grip heavy duty/industrial/automotive service size: x- large ** samples required at time of bid for this item
Lot 22: Nitrile disposable gloves, black, 6 mil. ( minimum thickness throughout, no exceptions) exam grade non- latex powder free beaded/textured grip heavy duty/industrial/automotive service size: 2x- large ** samples required at time of bid for this item
Lot 23: Food service gloves, polyethylene, disposable, latex and powder free, clear, size x- large ** samples required at time of bid for this item
Lot 24: Gloves, brown jersey cotton, unlined, 9 oz. , medium weight
Lot 25: Gloves, brown jersey cotton, lined, 14 oz. , heavy weight, gunn cutt
Lot 26: Gloves, string knit with full palm coating including finger tips, blue latex size: large
Lot 27: Gloves, string knit with full palm coating including finger tips, blue latex size: x- large
Lot 28: Impact style work glove size: medium 13 gauge unpadded double palm coated standard medium weight gloves minimum ansi puncture level 2 minimum ansi 2016 cut level a1 minimum ansi impact level 1
Lot 29: Impact style work glove size: large 13 gauge unpadded double palm coated standard medium weight gloves minimum ansi puncture level 2 minimum ansi 2016 cut level a1 minimum ansi impact level 1
Lot 30: Impact style work glove size: x- large 13 gauge unpadded double palm coated standard medium weight gloves minimum ansi puncture level 2 minimum ansi 2016 cut level a1 minimum ansi impact level 1
Lot 31: Impact style work glove size: xx- large 13 gauge unpadded double palm coated standard medium weight gloves minimum ansi puncture level 2 minimum ansi 2016 cut level a1 minimum ansi impact level 1
Lot 32: Ironclad command impact glove size: medium color: black reinforced touchscreen permissive synthetic suede padded palm breathable polyester knit back of hand tpr back of hand impact protection thumb saddle reinforcement terry cloth sweat wipe ansi cut rating: a2 ansi abrasion rating: 3 ansi puncture rating: 3 grip rating: dry 4/5, wet 4/5, oily 4/5
Lot 33: Ironclad command impact glove size: large color: black reinforced touchscreen permissive synthetic suede padded palm breathable polyester knit back of hand tpr back of hand impact protection thumb saddle reinforcement terry cloth sweat wipe ansi cut rating: a2 ansi abrasion rating: 3 ansi puncture rating: 3 grip rating: dry 4/5, wet 4/5, oily 4/5
Lot 34: Ironclad command impact glove size: x- large color: black reinforced touchscreen permissive synthetic suede padded palm breathable polyester knit back of hand tpr back of hand impact protection thumb saddle reinforcement terry cloth sweat wipe ansi cut rating: a2 ansi abrasion rating: 3 ansi puncture rating: 3 grip rating: dry 4/5, wet 4/5, oily 4/5
Lot 35: Ironclad command impact glove size: xx- large color: black reinforced touchscreen permissive synthetic suede padded palm breathable polyester knit back of hand tpr back of hand impact protection thumb saddle reinforcement terry cloth sweat wipe ansi cut rating: a2 ansi abrasion rating: 3 ansi puncture rating: 3 grip rating: dry 4/5, wet 4/5, oily 4/5
Lot 36: Leather work gloves safety cuff split cowhide, kevlar stitched leather- wrapped fingertips knuckle strap for abrasion protection double palm with extra layer of leather in high- wear areas cotton back absorbent fleece lining sewn into thumb and forefinger glove leather grade: a gunn cut thumb style: wing not insulated size: large
Lot 37: Leather work gloves safety cuff split cowhide, kevlar stitched leather- wrapped fingertips knuckle strap for abrasion protection double palm with extra layer of leather in high- wear areas cotton back absorbent fleece lining sewn into thumb and forefinger glove leather grade: a gunn cut thumb style: wing not insulated size: x large
Lot 38: Radians rwg560 axis polyurethane coated glove size: small 13 gauge, gray, hppe/fiberglass seamless knit, black polyurethane coating on palm, thumb and fingertips, knit wrist cut protection level a4 ansi/isea 105 cut level a4, abrasion level 6 and puncture level 5
Lot 39: Radians rwg560 axis polyurethane coated glove size: medium 13 gauge, gray, hppe/fiberglass seamless knit, black polyurethane coating on palm, thumb and fingertips, knit wrist cut protection level a4 ansi/isea 105 cut level a4, abrasion level 6 and puncture level 5
Lot 40: Radians rwg560 axis polyurethane coated glove size: large 13 gauge, gray, hppe/fiberglass seamless knit, black polyurethane coating on palm, thumb and fingertips, knit wrist cut protection level a4 ansi/isea 105 cut level a4, abrasion level 6 and puncture level 5
Lot 41: Radians rwg560 axis polyurethane coated glove size: x- large 13 gauge, gray, hppe/fiberglass seamless knit, black polyurethane coating on palm, thumb and fingertips, knit wrist cut protection level a4 ansi/isea 105 cut level a4, abrasion level 6 and puncture level 5
Lot 42: Radians rwg27 cut protection glove size: small dipped winter gripper glove 7- guage high visibility yellow polyester shell with a blue crinkle latex coating. Liner: 80% acrylic, 20% polyester seamless elastic slip- on cuff tested to ansi/isea cut level a3, tested to en388 standards for abrasions, cuts, tear and puncture en511- **** test against cold contact achieved performance level 2 thermal resistance
Lot 43: Radians rwg27 cut protection glove size: medium dipped winter gripper glove 7- guage high visibility yellow polyester shell with a blue crinkle latex coating. Liner: 80% acrylic, 20% polyester seamless elastic slip- on cuff tested to ansi/isea cut level a3, tested to en388 standards for abrasions, cuts, tear and puncture en511- **** test against cold contact achieved performance level 2 thermal resistance
Lot 44: Radians rwg27 cut protection glove size: large dipped winter gripper glove 7- guage high visibility yellow polyester shell with a blue crinkle latex coating. Liner: 80% acrylic, 20% polyester seamless elastic slip- on cuff tested to ansi/isea cut level a3, tested to en388 standards for abrasions, cuts, tear and puncture en511- **** test against cold contact achieved performance level 2 thermal resistance
Lot 45: Radians rwg27 cut protection glove size: x- large dipped winter gripper glove 7- guage high visibility yellow polyester shell with a blue crinkle latex coating. Liner: 80% acrylic, 20% polyester seamless elastic slip- on cuff tested to ansi/isea cut level a3, tested to en388 standards for abrasions, cuts, tear and puncture en511- **** test against cold contact achieved performance level 2 thermal resistance
More bid opportunities are waiting for you!
Start your free 14-day trial to see all results and access the bid documents.
Get bid alerts running in 3 simple steps
-
Tell us what you sell
Add keywords for your products or services. Smart Search helps catch related opportunities beyond exact matches.
-
Start the trial and receive alerts
Use the 14-day free trial and get email alerts with documents or official posting links.
-
Tune your feed
Adjust keywords, regions, email schedule and email style. Use map view and filters when you want to explore.
User testimonials
We selected the most helpful reviews from real users. Order may change periodically.
Very good and accurate information about the tenders: consistent and precise.
I consistently received notifications about bids within the specific segment I chose to monitor. The system simplifies processes that used to be complex, offering a navigation experience that is easy, fast, and modern.
I like the way they provide information with the greatest possible accuracy. I love that.
The tool is truly effective at scanning bid documents, efficiently delivering bids.
It's an extremely useful tool.
The idea of ​​using a keyword and sending the information by email is very good.
I closed deals thanks to the information gathered by the search tool. There’s no need to research across multiple media outlets.
It helps me identify areas of opportunity and find bids related to my work area.
You see a lot of tenders; you get emails with the alerts.
It encompasses all portals in one place.
A very good platform.
Smart search helped discover bids I hadn't even imagined receiving notifications for.
The information helps me submit my bids on time for bids, and I also have readily available information on upcoming bids. So far, I am very satisfied with what I have received.
Why use BidHits for government bidding
-
One workflow for scattered portals
Monitor opportunities across federal, state and local sources without checking them one by one.
-
Alerts and documents in less time
Receive matching bids by email, then open documents or the official posting from one place.
-
Tools to focus your pipeline
Filter by region, method and value. Use favorites, notes and removals to keep only what matters.
For teams and integrations
Send bid data into your CRM, BI or internal workflow via the Bid API, with JSON or XML output.
Frequently asked questions
BidHits is a government bid search engine that monitors official portals and brings relevant federal, state and local opportunities into one place. You can search on the site and receive scheduled email alerts.
Enter your email and activate the trial. For 14 days you can use the main features, including alerts and access to results. When it ends, if you do not subscribe at /subscription.php, the bid list becomes limited and you will not be charged automatically.
1) Add keywords that describe what you sell. 2) Start the trial. 3) Adjust regions, delivery times and email style after signup.
Whenever possible, yes. Some official portals require login or block direct links; in those cases we point you to the official process page so you can download the documents.
Yes. You can filter by region, procurement method, dates and value ranges. You can also save preferences for future alerts and searches.
Yes. In the dashboard you can see bids on a map and use it to plan follow-up by location.
It can happen. Smart Search uses your keywords to find related opportunities, not only exact matches. Add specific terms and remove off-topic results to improve future alerts.
Yes. You can query bids via API. Documentation at /api_integration.php. Ideal for CRM, BI and automations.
In Settings you can pause alerts or adjust delivery times. If you want to delete your account, just contact us. During the free trial there is no auto-charge.
We monitor major official sources every day at the federal, state and local levels. New bid notices are added as soon as they are captured from the source portal.
Plans start at $ 43.00 per month, with options for different business needs and billing terms. Start with a free trial and evaluate the results before subscribing, with no automatic billing.
See how it works
Start free trial
Add what you sell, get scheduled alerts, open documents or the official page, and use filters by region and method.
Transcript
Welcome to BidHits.
Finding public tenders and bids is important. But what really matters is quickly identifying the opportunities that match what your company sells.
To get started, enter a few keywords that describe your products or services. BidHits shows relevant opportunities, highlights your keywords, and organizes everything by date.
Smart search is already enabled and uses artificial intelligence to expand your results, even when the tender uses different words from the ones you searched for.
For each opportunity, you can view a summary, access documents, mark it as a favorite, add private notes, remove what is not relevant, or view it on the map.
You can also use filters, run searches, and explore the day's opportunities directly on the map.
Start using BidHits now. It's fast, practical, and you can try it for free.
AI Assistant
Ask me about the bid...
Loading summary...