BidHits™ uses cookies to provide an individualized service and care for the privacy and protection of shared data.
By browsing this site, we understand that you agree to the terms of our Privacy Policy.
Reaction Frames and Floor Plates Fabrication - DISCLAIMER: THIS SOURCES SOUGHT NOTICE IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR QUOTE. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. NO FUND
performance work statementreaction frames and floor plates fabricationscopebackgroundthe naval surface warfare center nswc carderock division requires largescale test fixturing in support of structural fatigue testing. the fixturing is roughly broken into two categories: floor plates and reaction frames and referred to herein by those names or as test fixtures where referring to all required components. there are two potential designs for the reaction frames, only one design will be manufactured. objective: the purpose of this rfi is to conduct market research to identify potential vendors with the capability to manufacture the required test fixtures. the government is seeking information from industry to assess capabilities, determine the feasibility of the preliminary design, compare the feasibilitycost of the two reaction frame designs, and gather feedback for acquisition planning. disclaimer: this is a request for information rfi only. this rfi is issued solely for information and planning purposes and do
AI helper
This is a Request for Information (RFI) from the Naval Surface Warfare Center (NSWC) Carderock Division for large-scale test fixturing, specifically floor plates and reaction frames, to support structural fatigue testing. The government is seeking to identify potential vendors with the capability to manufacture these fixtures. Vendors are requested to submit a capabilities statement addressing their company information, technical capabilities, experience with large steel structures and tight tolerances, NDT and dimensional inspection capabilities, manufacturability of two potential reaction frame designs, and estimated lead times and rough order of magnitude (ROM) pricing for the fixtures. Capability statements must be submitted via email by 12:00 PM Eastern on May 26, 2026. Specific drawings for floor plates and reaction frames are available upon request by May 19, 2026.
The bid notice requires vendors to possess capabilities for manufacturing and quality assurance actions, including fabricating or procuring steel floor plates and reaction frames, machining components to specified dimensions and finishes, assembling structures, and conducting required inspections with a comprehensive certificate of conformance. The bid notice states, he vendor is required to possess the capabilities to perform the following manufacturing and quality assurance actions: manufacturing: floor plates: fabricate or procure steel floor plates to the material specifications and sizes in reference a. machine the floor plates to the final dimensions, surfaces finishes, and hole patterns detailed in reference a. reaction frames: fabricate or procure steel beams, plates, and material stock to the material specifications and sizes in reference b or reference c. fabricate the large weldments as shown in reference b or reference c. machine the components to the final dimensions, tolerances, and surface finishes provided in reference b or reference c. assemble and confirm fitup of the threepiece reaction frame structure. certification inspection: conduct all required inspections and provide a comprehensive certificate of conformance for acceptance.
Printed Materials - It is the intent of these specifications to describe the minimum requirements in sufficient detail to secure comparable bids. All equipment and accessories catalogued as standard shall be included as part of this specification. All plans, prints, designs, concepts, etc. shall become the property of Denton County.
Printed Materials
AI helper
This is an Invitation to Bid (ITB) for printed materials. The deadline for submitting questions is May 21st, 2026, and the bid close date is June 4th, 2026. Mandatory requirements include a questionnaire and a pricing form, both in Excel format. All plans, prints, designs, and concepts shall become the property of Denton County.
The bid notice states that mandatory requirements include a questionnaire and a pricing form, both in Excel format. you will need to fill out the provided response template for this questionnaire. and you will need to fill out the provided response template for this bidtable.
Football Supplies and Equipment - Awarded Vendors: Please respond to the lines listed below with your name. Please note that if you were not awarded on the original proposal for a specific line item, than you are not eligible for an award on the renewal for that line item. Advanced Exercise - Line 1 Alert Services, Inc. - Line 1 America Team Sports - Line 1, 6, 11- 13, 15- 16, 18, 20, 21 Au Concepts & amp; Designs, LLC - Line 1 Big Game Sports, Inc. - Line 1 Cardinals Sports Center ( WYT) - Line 1, 6 Dougla
football supplies and equipment 1 percent discount off catalogpricelist 2 belts, football, white, polypropylene web with two metal d rings, 1x60 long 1 dozen 3 belts, football, variety of colors, polypropylene with two d rings 1x60 long 1 dozen 4 football pants, white, bsg, slotted football pants 5 football pants, color pants with or without pads 6 girdles, 5 padded girdle, youth and adult sizes. russell or alleson brand preferred 7 chin strap, 4 point high hookup, hardcup, varsity 8 football, composite, youth 9 football, leather 10 football, leather, youth 11 helmet, white, with roporopodw grey facemask attached with white hardcup, schutt vengeance pro 12 helmet, white with roporopodw grey facemask attached, youth, schutt vengeance a3 13 earjaw pads, compatible to fit schutt helmets 14 knee pads, vent air, 6. 5 15 knee pads, skilled knee pad, round, small in size 16 knee pads, skilled position 17 mouthguards, football, boilnbite, black or maroon, package of 100 18 rule book, football, ncaa 19 scrimmage vest,
AI helper
This is a Request for Proposal (RFP) for football supplies and equipment with a 3-year auto-renewal option. The response deadline is April 3, 2026, at 07:00 AM CT. Awarded vendors from the original proposal are eligible for renewal on specific line items. The contract term is firm for one year from the award date and can automatically extend for four additional one-year periods upon agreement of both parties. Plano ISD has the option to extend the RFP for up to 120 days if in the best interest of the district. Vendors must provide a percentage discount off their catalog price list. Specific items require adherence to brand or existing stock, with no alternates considered for certain items. Vendors providing reconditioning services must provide a certificate of insurance and be certified by the manufacturer. A Conflict of Interest Questionnaire (CIQ) must be completed if applicable. Additional documents required include Plano ISD Standard Terms and Conditions, W9, and Insurance Requirements. Suppliers must certify they are authorized to represent and bind their company.
The response deadline for this bid is April 3, 2026, at 07:00 AM CT.
Awarded vendors from the original proposal are eligible for renewal on specific line items. Vendors providing reconditioning services must be certified by the manufacturer for reconditioning and provide documentation.
The questions deadline for this bid is April 1, 2026, at 07:00 AM CT.
CUSTOME TEXTILE PROTYPE - ** THIS IS A SOLE SOURCE REQUIREMENT** for CUSTOME TEXTILE PROTYPE ** AUTHORIZED RESELLERS ONLY** ** SEE ATTACHMENTS** ** WE DO NOT PAY BY CREDIT CARD**
statement of work sow for asmweaving project weave two fabric blankets kevlar 200d warp and vectran 200d warp with six weft filling yarn combinations and five weave designs. deliverables include approximately 7 yards of fabric with testing reports for weight, thickness, and end counts. weave two fabric blankets using nasa selected coated warp yarns, following the same pattern structure as phase 1. weave one selected design fabric, 610 meters in length and 12 inches wide, based on results from phases 1 and 2. deliverables include final woven fabric and testing reports.
AI helper
The vendor will design, weave, and test fabrics for NASA. The work is divided into three phases. Payment terms are net 30 from the date of the invoice. The use of AI during contract performance must be disclosed.
The estimated completion dates are: phase 1 atp 14 weeks, phase 2a atp 3 weeks, phase 2b atp 17 weeks, nasa decision for phase 3 atp 21 weeks, and phase 3 atp 29 weeks.
The bid notice states, Payment terms: net 30 from date of invoice.
WCF Towels/Wipes Rental & Laundering - **** The Bureau of Engraving and Printing ( BEP) designs, prints, and furnishes a large variety of security documents, including Federal Reserve Notes, identification cards, naturalization certificates, and other special security
AI helper
A solicitation for services contract for the weekly rental and laundering of cloth wipes and towels will be released in October 2025. The period of performance includes a base year and two option periods of 12 months each, starting November 28, 2025. Interested parties must be registered under NAICS code **** at www. ***. *. * requirement is a 100% small business set-aside.
Interested parties shall be registered under the NAICS code at www. ***. *. *
Add keywords for your products or services. Smart Search helps catch related opportunities beyond exact matches.
2
Start the trial and receive alerts
Use the 14-day free trial and get email alerts with documents or official posting links.
3
Tune your feed
Adjust keywords, regions, email schedule and email style. Use map view and filters when you want to explore.
What our users say
They deliver on their promises. The information is simple and straightforward.
G. G
They provide information on a wide and varied range of purchasing processes. All the necessary details are also included.
J. M. Defelitto
I consistently received notifications about bids within the specific segment I chose to monitor. The system simplifies processes that used to be complex, offering a navigation experience that is easy, fast, and modern.
G. P. da S. E. Guimaraes
All bids related to our product are captured by you and sent to us. In my opinion, it’s perfect—broad coverage and easy searches across the bid documents.
R. M. Ferreira
Very good and accurate information about the tenders: consistent and precise.
BidHits is a government bid search engine that monitors official portals and brings relevant federal, state and local opportunities into one place. You can search on the site and receive scheduled email alerts.
Enter your email and activate the trial. For 14 days you can use the main features, including alerts and access to results. When it ends, if you do not subscribe at /subscription.php, the bid list becomes limited and you will not be charged automatically.
1) Add keywords that describe what you sell. 2) Start the trial. 3) Adjust regions, delivery times and email style after signup.
Whenever possible, yes. Some official portals require login or block direct links; in those cases we point you to the official process page so you can download the documents.
Yes. You can filter by region, procurement method, dates and value ranges. You can also save preferences for future alerts and searches.
Yes. In the dashboard you can see bids on a map and use it to plan follow-up by location.
It can happen. Smart Search uses your keywords to find related opportunities, not only exact matches. Add specific terms and remove off-topic results to improve future alerts.
Yes. You can query bids via API. Documentation at /api_integration.php. Ideal for CRM, BI and automations.
In Settings you can pause alerts or adjust delivery times. If you want to delete your account, just contact us. During the free trial there is no auto-charge.
We monitor major official sources every day at the federal, state and local levels. New bid notices are added as soon as they are captured from the source portal.
Plans start at $ 43.00 per month, with options for different business needs and billing terms. Start with a free trial and evaluate the results before subscribing, with no automatic billing.
Add what you sell, get scheduled alerts, open documents or the official page, and use filters by region and method.
Transcript
Welcome to BidHits.
Finding public tenders and bids is important. But what really matters is quickly identifying the opportunities that match what your company sells.
To get started, enter a few keywords that describe your products or services. BidHits shows relevant opportunities, highlights your keywords, and organizes everything by date.
Smart search is already enabled and uses artificial intelligence to expand your results, even when the tender uses different words from the ones you searched for.
For each opportunity, you can view a summary, access documents, mark it as a favorite, add private notes, remove what is not relevant, or view it on the map.
You can also use filters, run searches, and explore the day's opportunities directly on the map.
Start using BidHits now. It's fast, practical, and you can try it for free.
AI Assistant
Ask me about the bid...
Loading summary...
Methodology
Unaided survey with 1096 active users, conducted through 09/16/2026.
Single question: "Would you recommend our services to a friend or colleague?" - 90% answered "yes".
™
