Latest US Roof Box Contracts & Bids

Lot 1: 20- foot box trailer - SPECIFICATIONS- Gross Vehicle Weight Rating ( GVWR): Minimum 14, 000 pounds. Size: Interior Net Height ( including beam width and lighting width): Minimum 7 feet, 4 inches ( 88 inches). Trailer Width: 8. 5 feet. Length: 20- foot box Both the 20- foot box and 24- foot box trailers to be built to work and look the same. Frame: Frame Type: Rectangular Tube. Frame Material: Aluminum ( Minimum 11 gauge for frame). Frame Configuration ( Spacing on Center): 12 inches of spacing. Nose Type: Flat. Tongue Option: A- Frame ( Extended). Front Jack Options: Electric. Ball Coupler: 2 5/16 inches. Wiring: Wire tubing around wires along the inside of frame. Roof: Rounded Aluminum with no seams. Seam: Aluminum ( Seamless). Vent: Minimum two ( 2) Vents Centered Vents must be hood covered and evenly distributed on center. Walls, Flooring, and Doors: Attachment Method: Screwless. Insulated walls, ceiling, and roof. Under Flooring Corrosion- Inhibiting Moisture Barrier. Rubber Tread Plate ( RTP) on interior floor and wheel wells. Skin Thickness: 0. 05 inches. Curb Side Door: Minimum 36 inches X 78 inches - forward placement. Rear Door Type: Heavy Duty Ramp Door with flap and extension Prefer gapless continuous hinge. Flooring Material: Aluminum. Axle, Suspension, Brake, and Tire: Number of Axles: Two ( 2) ( tandem) - 7, 000 pounds per axle. Type of Axles: Torsion. Brake System: Electric Tire Size: Must be ST235/80R16 Radial Tire Load Range: Minimum E- 10 ply rated. Spare tire and wheel must be included and the same as what on the trailer Cargo and Interior Area: E- Track t: Must be attached to frame by weld. Wall Locations: Three ( 3) recessed tracks the length of the entire wall - On center at 15 inches, 44 inches, 64 inches. Floor Locations: Three ( 3) recessed tracks - Entire length of floor - Placed on both outer edges and one on center. D- Rings: Attached to frame by weld. Floor Locations: Minimum six ( 6) recessed, 5, 000 pounds each, D- Ring anchors ( 2 - Front, 2 - On Center, 2 - Rear). Lighting: Inte
Lot 2: 24- foot box trailer - SPECIFICATIONS- Gross Vehicle Weight Rating ( GVWR): Minimum 14, 000 pounds. Size: Interior Net Height ( including beam width and lighting width): Minimum 7 feet, 4 inches ( 88 inches). Trailer Width: 8. 5 feet. Length: 24- foot box Both the 20- foot box and 24- foot box trailers to be built to work and look the same. Frame: Frame Type: Rectangular Tube. Frame Material: Aluminum ( Minimum 11 gauge for frame). Frame Configuration ( Spacing on Center): 12 inches of spacing. Nose Type: Flat. Tongue Option: A- Frame ( Extended). Front Jack Options: Electric. Ball Coupler: 2 5/16 inches. Wiring: Wire tubing around wires along the inside of frame. Roof: Rounded Aluminum with no seams. Seam: Aluminum ( Seamless). Vent: Minimum two ( 2) Vents Centered Vents must be hood covered and evenly distributed on center. Walls, Flooring, and Doors: Attachment Method: Screwless. Insulated walls, ceiling, and roof. Under Flooring Corrosion- Inhibiting Moisture Barrier. Rubber Tread Plate ( RTP) on interior floor and wheel wells. Skin Thickness: 0. 05 inches. Curb Side Door: Minimum 36 inches X 78 inches - forward placement. Rear Door Type: Heavy Duty Ramp Door with flap and extension Prefer gapless continuous hinge. Flooring Material: Aluminum. Axle, Suspension, Brake, and Tire: Number of Axles: Two ( 2) ( tandem) - 7, 000 pounds per axle. Type of Axles: Torsion. Brake System: Electric Tire Size: Must be ST235/80R16 Radial Tire Load Range: Minimum E- 10 ply rated. Spare tire and wheel must be included and the same as what on the trailer Cargo and Interior Area: E- Track: Must be attached to frame by weld. Wall Locations: Three ( 3) recessed tracks the length of the entire wall - On center at 15 inches, 44 inches, 64 inches. Floor Locations: Three ( 3) recessed tracks - Entire length of floor - Placed on both outer edges and one on center. D- Rings: Attached to frame by weld. Floor Locations: Minimum six ( 6) recessed, 5, 000 pounds each, D- Ring anchors ( 2 - Front, 2 - On Center, 2 - Rear). Lighting: Interi

Interested parties must review the site frequently for updates and amendments to documents. Prospective contractors must be registered in the System for Award Management (SAM) www. ***. *. * at the time the quote is submitted to be eligible for award. The tender is for a 6 dog compartment alumline trailer with attached salient characteristics or equal. The specifications include detailed descriptions of the trailer's components, such as doors, compartments, axles, wheels, lighting, vents, shocks, storage, and HVAC systems.

This is a small business sources sought notice, not a solicitation. The notice seeks information on qualified small businesses, hubzone small businesses, service-disabled, veteran-owned, 8(a) small businesses, veteran-owned small businesses, woman-owned small businesses, or small disadvantaged businesses to provide mouse headfixation with locomotor navigation system. Responses must include place of manufacturing (if domestic) and country of manufacture. Small businesses must address size status of the manufacturer. Interested companies must submit documentation of their ability to meet project requirements, including employee count, personnel qualifications, GSA schedule contracts, and other relevant information. Responses must include technical and administrative contact information. Responses must be submitted electronically to Andrew Varley by July 7, 2025, at 1:00 PM Eastern Time. No proprietary or confidential business data should be included.

Lot 1: 20- foot box trailer - SPECIFICATIONS- Gross Vehicle Weight Rating ( GVWR): Minimum 14, 000 pounds. Size: Interior Net Height ( including beam width and lighting width): Minimum 7 feet, 4 inches ( 88 inches). Trailer Width: 8. 5 feet. Length: 20- foot box Both the 20- foot box and 24- foot box trailers to be built to work and look the same. Frame: Frame Type: Rectangular Tube. Frame Material: Aluminum ( Minimum 11 gauge for frame). Frame Configuration ( Spacing on Center): 12 inches of spacing. Nose Type: Flat. Tongue Option: A- Frame ( Extended). Front Jack Options: Electric. Ball Coupler: 2 5/16 inches. Wiring: Wire tubing around wires along the inside of frame. Roof: Rounded Aluminum with no seams. Seam: Aluminum ( Seamless). Vent: Minimum two ( 2) Vents Centered Vents must be hood covered and evenly distributed on center. Walls, Flooring, and Doors: Attachment Method: Screwless. Insulated walls, ceiling, and roof. Under Flooring Corrosion- Inhibiting Moisture Barrier. Rubber Tread Plate ( RTP) on interior floor and wheel wells. Skin Thickness: 0. 05 inches. Curb Side Door: Minimum 36 inches X 78 inches - forward placement. Rear Door Type: Heavy Duty Ramp Door with flap and extension Prefer gapless continuous hinge. Flooring Material: Aluminum. Axle, Suspension, Brake, and Tire: Number of Axles: Two ( 2) ( tandem) - 7, 000 pounds per axle. Type of Axles: Torsion. Brake System: Electric Tire Size: Must be ST235/80R16 Radial Tire Load Range: Minimum E- 10 ply rated. Spare tire and wheel must be included and the same as what on the trailer Cargo and Interior Area: E- Track t: Must be attached to frame by weld. Wall Locations: Three ( 3) recessed tracks the length of the entire wall - On center at 15 inches, 44 inches, 64 inches. Floor Locations: Three ( 3) recessed tracks - Entire length of floor - Placed on both outer edges and one on center. D- Rings: Attached to frame by weld. Floor Locations: Minimum six ( 6) recessed, 5, 000 pounds each, D- Ring anchors ( 2 - Front, 2 - On Center, 2 - Rear). Lighting: Inte
Lot 2: 24- foot box trailer - SPECIFICATIONS- Gross Vehicle Weight Rating ( GVWR): Minimum 14, 000 pounds. Size: Interior Net Height ( including beam width and lighting width): Minimum 7 feet, 4 inches ( 88 inches). Trailer Width: 8. 5 feet. Length: 24- foot box Both the 20- foot box and 24- foot box trailers to be built to work and look the same. Frame: Frame Type: Rectangular Tube. Frame Material: Aluminum ( Minimum 11 gauge for frame). Frame Configuration ( Spacing on Center): 12 inches of spacing. Nose Type: Flat. Tongue Option: A- Frame ( Extended). Front Jack Options: Electric. Ball Coupler: 2 5/16 inches. Wiring: Wire tubing around wires along the inside of frame. Roof: Rounded Aluminum with no seams. Seam: Aluminum ( Seamless). Vent: Minimum two ( 2) Vents Centered Vents must be hood covered and evenly distributed on center. Walls, Flooring, and Doors: Attachment Method: Screwless. Insulated walls, ceiling, and roof. Under Flooring Corrosion- Inhibiting Moisture Barrier. Rubber Tread Plate ( RTP) on interior floor and wheel wells. Skin Thickness: 0. 05 inches. Curb Side Door: Minimum 36 inches X 78 inches - forward placement. Rear Door Type: Heavy Duty Ramp Door with flap and extension Prefer gapless continuous hinge. Flooring Material: Aluminum. Axle, Suspension, Brake, and Tire: Number of Axles: Two ( 2) ( tandem) - 7, 000 pounds per axle. Type of Axles: Torsion. Brake System: Electric Tire Size: Must be ST235/80R16 Radial Tire Load Range: Minimum E- 10 ply rated. Spare tire and wheel must be included and the same as what on the trailer Cargo and Interior Area: E- Track: Must be attached to frame by weld. Wall Locations: Three ( 3) recessed tracks the length of the entire wall - On center at 15 inches, 44 inches, 64 inches. Floor Locations: Three ( 3) recessed tracks - Entire length of floor - Placed on both outer edges and one on center. D- Rings: Attached to frame by weld. Floor Locations: Minimum six ( 6) recessed, 5, 000 pounds each, D- Ring anchors ( 2 - Front, 2 - On Center, 2 - Rear). Lighting: Interi

The tender specifies detailed requirements for the supply and installation of a solar PV system, including electrical characteristics of PV modules, inverter specifications (IEEE ****, UL **** compliance, anti-islanding, anti-export features, monitoring, and safety), combiner box specifications, roof mounting structure (with seismic and wind load considerations), PV system monitoring and metering, operating instructions, nameplates, marking, grounding, bonding, and lightning protection. The document also outlines installation procedures, commissioning, testing, quality control, and training requirements. Additional documents required, participation criteria, process stages, cost of the dispute, deadlines for clarification and objection, exclusivity for certain types of companies, deadline for starting services, deadline for total delivery of services, and other relevant information are not explicitly mentioned.