Bar Furniture Biddings - Procurement Opportunities

This is a sources sought notice for the replacement of 40 behavioral health mattresses. Interested contractors must submit information and capabilities/qualifications statements, including an overview of proposed solutions and a description of the product, in accordance with the statement of work draft. Responses must be submitted via email to ***@***. *. * no later than 14:00 MST on Friday, May 9, 2025. Delivery will be made to the svahcs warehouse, building 7. The contractor must deliver the requested items within 6 weeks of the date of award. Any changes to the statement of work must be authorized and approved through written correspondence from the CO.

This procurement is for 18 office tables via SAM. gov, set aside for small businesses. Quotes must be brand name or equal to the specified manufacturer and part number. Delivery is required 30 days after receipt of order. Quotes must include a copy of the specification sheet, letter of supply, authorized reseller letters, and/or teaming agreements. The award will be based on the lowest price technically acceptable (LPTA). Past performance evaluation will be part of the responsibility determination. All FOB destination quotations must be submitted electronically via email to ***@***. *. * by Monday, May 12, 2025, at 4:00 PM EST.

This is a combined synopsis solicitation for a firm fixed price commercial services contract for the cleanup, sanitization, removal of damaged materials, and repair of the horse corrals adoption office in Burns, Oregon. The contract covers tasks such as removing furniture, cleaning surfaces, removing damaged trim and sheetrock, replacing sheetrock, painting, installing trim, and disposing of waste materials. The period of performance is from the date of award through 6/30/2025. The contractor must provide a written work progress plan, and comply with various federal, state, and local laws, including environmental regulations, hazardous materials handling, and fire safety procedures during the fire season. Additional documents required, participation criteria, process stages, cost of the dispute, deadlines for clarification and objection, and other relevant information are not explicitly mentioned in the provided text.

Lot 1: - DuMor # 502- 32TX- BT Exterior Trash cans- OR APPROVED EQUAL- SPECIFICATIONS: - Trash cans should have a receptacle body and cover. - The liner should have at least a thirty- two ( 32)- gallon capacity. - Expansion anchors should be provided. - All products must be 100% BLEACH cleanable to reduce the spread of infectious diseases. - Materials that needs to be used for the outdoor furniture is as follows: wood- grain recycled plastic slats, steel tubing, steel sheets, stainless steel, cast aluminum, steel plate, carbon steel flat bars, and steel expansion anchors. - All finished powder- coated parts should comply with the following ASTM methods for coating and coating method: ASTM- D- 523, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- B- 117, and ASSTM- D- ****- Minimum twenty ( 20)- year limited warranty on structural failure of frame, a ten ( 10)- year limited warranty on structural failure of recycled plastic, a five ( 5) year limited warranty against finish failure on all powder- coated products, and a one ( 1)- year limited warranty on all other items. SHIPPING IS TO BE INCLUDED IN BID OFFER. Bidders who propose alternate brands/specifications should enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non- responsive bid. If the brands are not changed, the contract will be written accordingly and the successful bidder shall be required to deliver the brand/specification stated in the solicitation.
Lot 2: - DuMor # 505- 60TX OUTDOOR BENCHES- OR APPROVED EQUAL- SPECIFICATIONS: - The seat height for outdoor benches should be approximately eighteen ( 18) inches. - Benches should be approximately seventy- five ( 75) inches wide, twenty- six ( 26) inches deep, and thirty- five ( 35) inches in height. - Benches should bear a weight capacity of seven hundred fifty ( 750) pounds. - All products must be 100% BLEACH cleanable to reduce the spread of infectious diseases. - Materials that needs to be used for the outdoor furniture is as follows: wood- grain recycled plastic slats, steel tubing, steel sheets, stainless steel, cast aluminum, steel plate, carbon steel flat bars, and steel expansion anchors. - All finished powder- coated parts should comply with the following ASTM methods for coating and coating method: ASTM- D- 523, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- B- 117, and ASSTM- D- ****- Minimum twenty ( 20)- year limited warranty on structural failure of frame, a ten ( 10)- year limited warranty on structural failure of recycled plastic, a five ( 5) year limited warranty against finish failure on all powder- coated products, and a one ( 1)- year limited warranty on all other items. SHIPPING IS TO BE INCLUDED IN BID OFFER. Bidders who propose alternate brands/specifications should enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non- responsive bid. If the brands are not changed, the contract will be written accordingly and the successful bidder shall be required to deliver the brand/specification stated in the solicitation.
Lot 3: - DuMor # 481- 20TX OUTDOOR CHAIRS- OR APPROVED EQUAL- SPECIFICATIONS: - The seat height for outdoor chairs should be approximately seventeen ( 17) inches. - The chairs should be approximately twenty- seven ( 27) inches wide and twenty- five ( 25) inches deep. - Chairs should bear a weight capacity of three hundred fifty ( 350) pounds. - All products must be 100% BLEACH cleanable to reduce the spread of infectious diseases. - Materials that needs to be used for the outdoor furniture is as follows: wood- grain recycled plastic slats, steel tubing, steel sheets, stainless steel, cast aluminum, steel plate, carbon steel flat bars, and steel expansion anchors. - All finished powder- coated parts should comply with the following ASTM methods for coating and coating method: ASTM- D- 523, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- B- 117, and ASSTM- D- ****- Minimum twenty ( 20)- year limited warranty on structural failure of frame, a ten ( 10)- year limited warranty on structural failure of recycled plastic, a five ( 5) year limited warranty against finish failure on all powder- coated products, and a one ( 1)- year limited warranty on all other items. SHIPPING IS TO BE INCLUDED IN BID OFFER. Bidders who propose alternate brands/specifications should enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non- responsive bid. If the brands are not changed, the contract will be written accordingly and the successful bidder shall be required to deliver the brand/specification stated in the solicitation.
Lot 4: - DuMor # 6B- 519TX- UMB OUTDOOR TABLES- OR APPROVED EQUAL- SPECIFICATIONS: - Outdoor tables should be approximately forty- eight ( 48) inches in diameter and thirty ( 30) inches in height. - Tables should have an umbrella hole in the center. - Expansion anchors should be provided. - All products must be 100% BLEACH cleanable to reduce the spread of infectious diseases. - Materials that needs to be used for the outdoor furniture is as follows: wood- grain recycled plastic slats, steel tubing, steel sheets, stainless steel, cast aluminum, steel plate, carbon steel flat bars, and steel expansion anchors. - All finished powder- coated parts should comply with the following ASTM methods for coating and coating method: ASTM- D- 523, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- B- 117, and ASSTM- D- ****- Minimum twenty ( 20)- year limited warranty on structural failure of frame, a ten ( 10)- year limited warranty on structural failure of recycled plastic, a five ( 5) year limited warranty against finish failure on all powder- coated products, and a one ( 1)- year limited warranty on all other items. SHIPPING IS TO BE INCLUDED IN BID OFFER. Bidders who propose alternate brands/specifications should enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non- responsive bid. If the brands are not changed, the contract will be written accordingly and the successful bidder shall be required to deliver the brand/specification stated in the solicitation.
Lot 5: - DuMor # 441- **** OUTDOOR PLANTERS- OR APPROVED EQUAL- SPECIFICATIONS: - Outdoor planters should be approximately twenty ( 20) to thirty ( 30) inches in height. - Expansion anchors should be provided. - All products must be 100% BLEACH cleanable to reduce the spread of infectious diseases. - Materials that needs to be used for the outdoor furniture is as follows: wood- grain recycled plastic slats, steel tubing, steel sheets, stainless steel, cast aluminum, steel plate, carbon steel flat bars, and steel expansion anchors. - All finished powder- coated parts should comply with the following ASTM methods for coating and coating method: ASTM- D- 523, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- D- ****, ASTM- B- 117, and ASSTM- D- ****- Minimum twenty ( 20)- year limited warranty on structural failure of frame, a ten ( 10)- year limited warranty on structural failure of recycled plastic, a five ( 5) year limited warranty against finish failure on all powder- coated products, and a one ( 1)- year limited warranty on all other items. SHIPPING IS TO BE INCLUDED IN BID OFFER. Bidders who propose alternate brands/specifications should enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non- responsive bid. If the brands are not changed, the contract will be written accordingly and the successful bidder shall be required to deliver the brand/specification stated in the solicitation.

Bid invitation for **** barber chairs. Mandatory questions regarding compliance with attached solicitation document (sections submission ****) are required.