Facing Head Government Bids & RFPs

Lot 1: Traffic control -

Lot 2: Grading complete -

Lot 3: Concrete pavers

Lot 4: Conc sidewalk, 4 in

Lot 5: Conc sidewalk, 6 in

Lot 6: Conc sidewalk, 8 in

Lot 7: Concrete header curb, 6 in, tp 2

Lot 8: Concrete header curb, 10 in, tp 4

Lot 9: Concrete header curb, 6 in, tp 7

Lot 10: Conc curb & gutter, 8 in x 24 in, tp 2

Lot 11: Class a concrete, type p1, retaining wall

Lot 12: Class a concrete, type p2, retaining wall

Lot 13: Class a concrete, incl reinf steel

Lot 14: Driveway concrete, 8 in tk

Lot 15: Aggr surf crs

Lot 16: Stone facing

Lot 17: Description UOM Qty 310- ****

Lot 18: Gr aggr base crs, incl matl

Lot 19: Recycled asph conc leveling, incl bitum matl & h lime

Lot 20: Recycled asph conc 25 mm superpave, gp 1 or 2, incl bitum matl & h lime

Lot 21: Recycled asph conc 12. 5 mm superpave, gp 2 only, incl bitum matl & h lime

Lot 22: Recycled asph conc 19 mm superpave, gp 1 or 2, incl bitum matl & h lime

Lot 23: Tack coat

Lot 24: Mill asph conc pvmt, variable depth

Lot 25: Pvmt reinf fabric strips, tp 2, 18 inch width

Lot 26: Class b conc, base or pvmt widening

Lot 27: Description UOM Qty 653- ****

Lot 28: Thermoplastic solid traf stripe, 6 in, white

Lot 29: Thermoplastic solid traf stripe, 6 in, yellow

Lot 30: Thermoplastic solid traf stripe, 24 in, white

Lot 31: Thermoplastic solid traf stripe, 8 in, white

Lot 32: Thermoplastic skip traf stripe, 6 in, white

Lot 33: Thermoplastic pvmt marking, arrow, tp 2

Lot 34: Thermoplastic pvmt marking, arrow, tp 3

Lot 35: Raised pvmt markers tp 1

Lot 36: Raised pvmt markers tp 3

Lot 37: Highway signs, tp 1 matl, refl sheeting, tp 11

Lot 38: Galv steel posts, tp 7

Lot 39: Highway signs, tp 1 matl, refl sheeting, tp 9

Lot 40: Description UOM Qty 636- ****

Lot 41: Highway signs, tp 2 matl, refl sheeting, tp 9

Lot 42: Steel strain pole, tp iv w/45' mast arm, black coated

Lot 43: Steel strain pole, tp iv w/50' mat arm, black coated

Lot 44: Steel strain pole, tp iv w/65' mast arm, black coated

Lot 45: Traffic signal installation no - 1

Lot 46: Pull box, type 2

Lot 47: Pull box, type 3

Lot 48: Pull box, type 4s

Lot 49: Pedestrian detection system, no - 1, type b

Lot 50: Microwave vehicle detection system, no - 1, type b

Lot 51: Highway signs, tp 1 matl, refl sheeting, tp 9

Lot 52: Remove and reset connected vehicle roadside unit

Lot 53: Remove and reset cctv system, type 1

Lot 54: Remove and reset cctv mounting arm, type 4

Lot 55: Description UOM Qty 163- ****

Lot 56: Temporary grassing

Lot 57: Mulch

Lot 58: Construct and remove construction exits

Lot 59: Construct and remove silt control gate, tp 3

Lot 60: Construct and remove rip rap check dams, stone plain rip rap/sand bags

Lot 61: Temporary silt fence, type c

Lot 62: Construct and remove inlet sediment trap

Lot 63: Construct and remove compost filter sock, 18 in

Lot 64: Maintenance of check dams - all types

Lot 65: Maintenance of silt control gate, tp 3

Lot 66: Maintenance of construction exit

Lot 67: Maintenance of inlet sediment trap

Lot 68: Maintenance of construction exit tire wash area ( per each)

Lot 69: Maintenance of compost filter sock ( all sizes)

Lot 70: Water quality monitoring and sampling

Lot 71: Water quality inspections

Lot 72: Maintenance of temporary silt fence, tp c

Lot 73: Description UOM Qty 700- ****

Lot 74: Agricultural lime

Lot 75: Fertilizer mixed grade

Lot 76: Fertilizer nitrogen content

Lot 77: Sod

Lot 78: Plain conc ditch paving, 4 in

Lot 79: Description UOM Qty 702- ****

Lot 80: Acer buergeranum -

Lot 81: Nyssa sylvatica -

Lot 82: Quercus lyrata -

Lot 83: Quercus phellos -

Lot 84: Distylium hybrid

Lot 85: Fothergilla gardenii -

Lot 86: Loropetalum chinense -

Lot 87: Yucca filamentosa -

Lot 88: Panicum virgatum -

Lot 89: Hypericum calycinum -

Lot 90: Liriope muscari -

Lot 91: Concrete seat wall

Lot 92: Bench

Lot 93: Bicycle rack

Lot 94: Waste receptacle unit

Lot 95: Bollards

Lot 96: Description UOM Qty 668- ****

Lot 97: Catch basin, gp 1

Lot 98: Drop inlet, gp 1

Lot 99: Storm drain pipe, 18 in, class iii

Lot 100: Storm drain pipe, 24 in, class iii

Lot 101: Storm drain pipe, 36 in, class iii

Lot 102: Flared end section 24 in, storm drain

Lot 103: Reconstr drop inlet, group 1

Lot 104: Reconstr catch basin, group 1

Lot 105: Reconstr junction box

Lot 106: Adjust manhole to grade

Lot 107: Storm sewer manhole, tp 1

Lot 108: Storm sewer manhole, tp 1, addl depth, cl 1

Lot 109: Drop inlet, gp 1, addl depth

Lot 110: Catch basin, gp 1, addl depth

Lot 1: Specifications attached at the header. ONLY ONLINE BIDS WILL BE ACCEPTED FOR THIS RFB. Emailed and hard copies delivered by any method WILL NOT BE ACCEPTED. During Phase 1 bidders must enter $ 0. 01 for price and zero ( 0) for delivery in the e- procurement system. See attached document How to Respond to an Online Bid through the Kentucky Vendor Self Service site ( updated). pdf. Please enter contact person, phone number and email in the Comments Section. Vendors should review and update, if necessary, all addresses and contact persons for their account prior to bid submission. This information will carry forward to a contract if awarded, therefore please ensure all information is correct. DO NOT SUBMIT PRICING DURING PHASE 1. This RFB will be conducted as a Multistep Competitive Sealed Bid in accordance with 200 KAR 5: 375 also referred to as a REVERSE AUCTION. The Commonwealth has partnered with eBridge to host this bidding event on its Web- Based Bidding Platform. Vendors who have not previously registered must register with eBridge by emailing ***@***. *. * Review the Attachment ( eBridge Bid Instructions). The awarded supplier is obligated to pay a transaction fee to eBridge pursuant to the Terms and Conditions accepted upon placement of initial bid. This RFB will consist of two phases: Phase 1: VENDORS SHALL SUBMIT UNPRICED OFFERS per instruction in Section 3. 04. Prices will be accepted only from bidders whose unpriced technical offer is found acceptable during Phase 1. Phase 2: PRICES WILL ONLY BE ACCEPTED IN THE SECOND PHASE DURING THE ONLINE REVERSE AUCTION BIDDING EVENT. If only one ( 1) responsive bid is received, the online reverse auction will be cancelled and the Division of Purchases, will request pricing from the vendor via email. The criteria that will be used to evaluate the offers at the conclusion of the online bidding event are located in section 5. 00.

Lot 2: Specifications attached at the header.

Lot 3: Specifications attached at the header.

Lot 4: Specifications attached at the header.

Lot 5: Specifications attached at the header.

Lot 6: Specifications attached at the header.

Lot 7: Specifications attached at the header.

Lot 8: Specifications attached at the header.

Lot 9: Specifications attached at the header.

Lot 10: The Anchor Sleeve receives the 2" x 2" sign posts and must be compatible with the 2" square sign posts in Items 1- 5. See Section 1. 0 for specifications.

Lot 11: Must fit the 2. 25" x 2. 25" anchor sleeve in Item 11 and be attached to two adjoining sides of the anchor. T009 - the Soil Stabilizer details depicted on the right side of the drawing correlate with Line 11

Lot 12: This item shall be the 8" Redi Torque Model 280 Slip Base for installation in new concrete by Xcessories Squared - Product Number RT8UX- ****- G. This is KYTC' s Type D omni- directional slip base that is MASH compliant and has a triangular slip plate with 8" sides. This Item is used with Items 6- 9 ( 2. 5" x 2. 5" square posts). This item includes a slip base top that accepts 2. 5" square posts, a match plate hardware kit ( which includes Redi- Torque Model 280 double hex torque- free bolts, flat washers, Teflon- coated plate separators, and large flange nuts), and a unibase anchor for installation in new concrete ( i. e. there is not a soil stablizer plate attached to this unibase anchor).

Lot 13: This item shall be the 8" Redi Torque Model 280 for installation in soil by Xcessories Squared - Product Number RT8UX- ****- G. This is KYTC' s Type D omni- directional slip base that is MASH compliant and has a triangular slip plate with 8" sides. This Item is used with Items 6- 9 ( 2. 5" x 2. 5" square posts). This item includes a slip base top that accepts 2. 5" square posts, a match plate hardware kit ( which includes Redi- Torque Model 280 double hex torque- free bolts, flat washers, Teflon- coated plate separators, and large flange nuts), and a unibase anchor that has a preattached soil stabilizer plate for installation in soil.

Lot 14: This item shall be the 8" Redi Torque Model 280 for installation in existing, hardened concrete by Xcessories Squared - Product Number SMSB8- 10- G. This is KYTC' s Type D omni- directional slip base that is MASH compliant and for surface mounting a sign assembly onto existing hardened concrete. It has a triangular slip plate with 8" sides. This item is to be used with Items 6- 9 ( the 2. 5" x 2. 5" square posts). This item includes a triangular slip base bottom plate stub that is welded to a flat base plate that has four holes for anchoring the suface mount assembly to existing concrete. This item does not include the slip base top that accepts 2. 5" square posts ( see Item 15). This item does not include the match plate hardware ( see Item 16). This item does not include the 5/8" x 6" Threaded Wedge Bolts needed to anchor this surface mount to existing hardened concrete ( see Item 26 for the wedge bolts).

Lot 15: This item shall be the 8" Redi- Torque Model Model 280 Slip Base Top for 2. 5" square posts by Xcessories Squared - Product Number SB8C- 250A- G. This item is the slip base top that accepts 2. 5" x 2. 5" square post and is a component of KYTC' s Type D Slip Base assemblies. This Item is typically used to replace missing Type D Slip Base Tops during repair of an existing Type D Slip Base assembly. It is also used when installing a new ( or repairing and existing) KYTC Type D Surface Mount ( see Item 14).

Lot 16: This item shall be the Redi- Torque Match- Plate Hardware - full set by Xcessorites Squared - Product Number RTSB- MPHDW. This match plate hardware kit is a component of KYTC' s Type D Slip Base assemblies. This kit is used during the repair of an existing Type D Slip Base assembly OR when installing a new ( or repairing an existing) Type D Surface Mount ( see Item 14). This is a full hardware set that includes the necessary Redi- Torque Model 280 1/2"- 13 x 3" Grade 8 double hex bolts, 5/8" flat washers, 1- 3/4" square x 3/16" thick Teflon- coated plate separators, and 1/2"- 13 x 3" Grade 8 large flange nuts necessary to replace the match plate hardware of a single Type D Slip Base.

Lot 17: This item shall be the Redi Torque Model 280 by Xcessories Squared - Product Number RT8UX- ****- G. This is the unibase anchor that is one component of the full Type D Slip Base set in Item 12. This unibase anchor is 48" long and has an 8" triangular slip plate welded to the top. This item will typically be used during repairs where a full Type D Slip Base set is not needed.

Lot 18: This item shall be the Redi Torque Model 280 by Xcessories Squared - Product Number RT8UX- ****- G. This is the unibase anchor that is one component of the full Type D Slip Base set in Item 13. This unibase anchor is a 42" long and has an 8" triangular slip plate welded to the top and a soil stablizer plate welded to the anchor stem just below the triangular slip plate. This item will typically be used for repairs where a full Type D Slip Base set is not needed.

Lot 19: This item shall be the Kleen Break Model 425 Sign Post Coupler System by Xcessories Squared - Product Number ****- G. This items includes a surface mount anchor with three holes for securing the anchor to existing hardened concrete, a rubber bushing, the Model 425 Shear Bolt, a top receiver that accepts 2" x 2" posts ( see Items 1- 5), and a locking wedge. See Item 29 for the Kleen Break Shear Bolt Wrench used to tighten the Model 425 Shear Bolt. This item does not included the three 1/2" x 4" threaded wedge bolts needed to secure the anchor plate to existing, hardened concrete - see Item 27 for the threaded wedge bolts.

Lot 20: This item shall be the Kleen Break Model 425 sign post receiver by Xcessories Squared - Product Number TX175- 200- G. This is the top portion of the Kleen Break that accepts 2" x 2" sign posts. This item will tyipcally used to replace missing Kleen Break post receivers during repair of an existing Kleen Break assembly.

Lot 21: This item shall be the Kleen Break Model 425 shear bolt and associated hardware by Xcessories Squared - Product Number ****- Z. This is the replacement shear bolt for Item 14 and is typically used when repairing an existing Kleen Break.

Lot 22: This shall be the Kleen Break Model 425 rubber bushing by Xcessories Squared - Product Number RB30- EPDM. This is the replacement rubber bushing for Item 14 and is typically used when repairing an existing Kleen Break.

Lot 23: This item shall be the Kleen Break Model 425 stem anchor by Xcessories Squared - Product Number CKBA- 8- G. The stem anchor is 8 inches long and can be used with either a new concrete installation OR a soil intallation. The stem portion of this anchor is set in either new concrete or inserted into a 2. 25" x 2. 25" anchor sleeve with soil stablizer plate ( see Items 10 and 11) that has been driven into soil.

Lot 24: Must be able to mount square tube sign posts specified in items 1- 9 and the post receiver cannot be more than 4" in height.

Lot 25: Galvanized Steel Bracket. All brackets must be able to mount square sign posts specified in Items 1- 9. Must be able to anchor to top and one side of barrier wall. Bracket will be 3/8" thick and is either 4" x 7" or 2. 5" x **** - the Barrier Mounting Bracket details depicted on the right side of drawing correlates with Line 25.

Lot 26: Must have a rust resistant finish. To be used to attached the base plate of Item 14 onto existing, hardened concrete.

Lot 27: Must have a rust resistant finish. To be used to attached the Kleen Break anchor that is within Item 19 onto existing, hardened concrete.

Lot 28: This item shall be the Post Locking Wedge for Square Posts by Xcessories Squared - Product Number LWX35F- G. This a replacement locking wedge for use with the Redi- Torque Model 280 Slip Base System ( KYTC' s Type D Slip Base) or for use with the Kleen Break Model 425 Sign Post Coupler System. This item is usually used when repairing an existing Type D Slip Base or an existing Kleen Break.

Lot 29: This item shall be the Kleen Break Shear Bolt Wrench by Xcessories Squared - Product Number XKBW- 1516. This is the tool used to reinstall the Kleen Break Shear Bolt ( see Item 21) when repairing an existing Kleen Break.

Lot 30: For securing telescoping sections of sign posts. Bolt must have a rust resistant finish and have a 90 degree bend designed for placement in 7/16" holes on adjacent sides.

Lot 31: Must have a rust resistant finish. For use with corner bolts ( see Items 30 and 33).

Lot 32: To be used with corner bolts. For use with corner bolts ( see Items 30 and 33).

Lot 33: 5/16" diameter large corner bolt, 3 inches long.

Lot 34: 3/8"- 16 x 3" HHCS Gr8 Zinc/Yellow

Lot 35: Case- hardened 3/8" flange nut

Lot 36: 2" Aluminum Sign Bracing 12' w/Holes.

Lot 37: Stainless Steel - Must fit the 2" square posts in Items 1- 5.

Lot 38: Stainless Steel - Must fit the 2. 5" square posts in Items 6- 9.

Lot 39: Galvanized Steel Rivets ( for additional strength) with attached vinyl washer shall have a rust resistant finish and shall be designed for attaching sign with 3/8 " diameter holes to posts with 7/16 " diameter holes.

Lot 40: To be used with Item 39.

Lot 41: 1/2" x 2" Grade 8 flange bolt

Lot 42: 1/2" drop in anchor

Lot 43: 1/2" x 5 1/2" expansion anchor

Lot 44: 5/16"- 18x3 NC Slotted Round Washer

Lot 45: 5/16"- **** NC Slotted Round Washer

Lot 46: 4" Diameter Pole, Tapped Hole for 5/16th"- 18 Bolts

Lot 47: 100 Per Box - Hex Head Bolts 5/16"- 18 x 3/4" long

Lot 48: 100 Per Box - 5/16" Fiber Washer ( 1/16" x 7/8" OD)

Lot 49: 2" x 48" High Intensity Prismatic ( Type XI) Red Sign Post Facing, 3 Hole

Lot 50: 2" x 48" High Intensity Prismatic ( Type XI) Yellow Sign Post Facing, 3 Hole

Lot 51: 2" x 48" High Intensity Prismatic ( Type XI) White Sign Post Facing, 3 Hole

Lot 52: 2" x 48" High Intensity Prismatic ( Type XI) Fluorescent Yellow Green Sign Post Facing, 3 Hole