Government bid alerts, regional filters, and fast access to documents
Last updated on 04/19/2026.
Nonmagnetic Encoders/ Linear Motorized Stages
3- Axis Motorized Stages - Please see attached combined synopsis/solicitation.
Scanning stage system
Bid Close Date:
Linear Stage System/ Encoders
3- Axis Motorized Stages - NIST- SS26- CHIPS- 82 PLEASE NOTE THIS A SOURCES SOUGHT NOTICE ONLY Title: 3- Axis Motorized Stages BACKGROUND Sensor Science Division, we are developing a magnetic imagin
3 axis motorized stages linear motorized stages of the xyz stage stack travel ranges x stage: 300 mm travel y stage: 100 mm travel z stage: at least 50 mm travel motion requirements accuracy: 2 m repeatability: 1. 5 m smallest step size: 1. 5 m maximum velocity: 10 mm s must be possible to execute repeated xy scanning z stage specific requirements z stage mounted on top z stage must be low profile lift type stage in order keep stack height small assembly and mapping by vendor the xyz stack must be assembled by the vendor the xyz stack must calibrated at least for x and y directions by the vendor, to show that accuracy and repeatability requirements have been met other stage requirements total stack height must be must operate within specs with payload up to 4 kg 40 n must have non magnetic body e. g. , aluminum must have non magnetic encoders all cables and accessories must be included must have imperial unit dimensions for mounting holes additional linear stages for the 4th axis we will mount these on our own
Bid Close Date:
Encoder/ Linear Array
Paut equipment - sole source solicitation attached
salient characteristics **** item 01 standard wedge for angle beam phasedarray probe type a32, normal scan, 55 refracted angle in steel, shear wave, with ihc option irrigation, holesand carbides. part number sa32n55sihc, item **** item 02 cobra wedge for conventional tofd ut probe, st1 evident typewith 3 mm element diameter, 70 degree refracted angle in steel, longitudinal wave, with ih option irrigation, holes and without carbides. the wedge features a curvaturematching **** in. 73. 0 3 mm to 3. 5 in. 88. 9 mm outside diameter od pipe for inspectionof circumferential welds. importantnote: the use of those wedges will increase theminimum clearance required for the use of the cobra scanner. part number st170lihaod3. 5cobra. item **** item 03 cobra wedge for conventional tofd ut probe, st1 evident typewith 3 mm element diameter, 70 degree refracted angle in cuni, longitudinal wave, with ih option irrigation, holes and without carbides. the wedge features a curvaturema
Bid Close Date:
Encoder/ Linear Array
Paut equipment - sole source solicitation attached
salient characteristics **** item 01 standard wedge for angle beam phasedarray probe type a32, normal scan, 55 refracted angle in steel, shear wave, with ihc option irrigation, holesand carbides. part number sa32n55sihc, item **** item 02 cobra wedge for conventional tofd ut probe, st1 evident typewith 3 mm element diameter, 70 degree refracted angle in steel, longitudinal wave, with ih option irrigation, holes and without carbides. the wedge features a curvaturematching **** in. 73. 0 3 mm to 3. 5 in. 88. 9 mm outside diameter od pipe for inspectionof circumferential welds. importantnote: the use of those wedges will increase theminimum clearance required for the use of the cobra scanner. part number st170lihaod3. 5cobra. item **** item 03 cobra wedge for conventional tofd ut probe, st1 evident typewith 3 mm element diameter, 70 degree refracted angle in cuni, longitudinal wave, with ih option irrigation, holes and without carbides. the wedge features a curvaturema
Bid Close Date:
Amendment # 1 High Speed Precision Motor, Controller and Accessories - NO SUBSTITUTIONS - AMENDMENT # 1 TO REMOVE SMALL BUSINESS SET ASIDE REQUIREMENT AND ADD QA CODE 4. 43 AS NOTED BELOW: & ldquo; Products that are not purchased directly from the Original Equipment Manufacturer ( OEM)/Original Component Manufacturer ( OCM) must be p
Supplier Quality Assurance Requirements qty 1 rgv100bl s high speed precision rotary stage, brushless motor, direct encoder, 360 qty 1 xps d8 high performance universal motion controller, 8 axis, dc brush, stepper, linear and piezo motor control, ethernet, gpio, pco qty 1 xps drv11 universal digital driver card for stepper, dc, brushless and direct motors qty 1 xps dk21 cable kit for rgv100hl s and rgv100bl s motorized stages, driven by xpsdrv11
Bid Close Date:
Monitor opportunities across federal, state and local sources without checking them one by one.
Receive matching bids by email, then open documents or the official posting from one place.
Filter by region, method and value. Use favorites, notes and removals to keep only what matters.
Add keywords for your products or services. Smart Search helps catch related opportunities beyond exact matches.
Use the 14-day free trial and get email alerts with documents or official posting links.
Adjust keywords, regions, email schedule and email style. Use map view and filters when you want to explore.
I closed deals thanks to the information gathered by the search tool. There’s no need to research across multiple media outlets.
It's an extremely useful tool.
Excellent information. Just what I was looking for.
It is complete and optimal, it improves my time.
The idea of ​​using a keyword and sending the information by email is very good.
I’ve landed several contracts through this platform. There’s no need to search—they send the service notifications directly to you.
The information helps me submit my bids on time for bids, and I also have readily available information on upcoming bids. So far, I am very satisfied with what I have received.
I’m notified immediately about every bid that opens in my area. It really helps my work.
Efficiency in search times.
Simple, easy to use, and always up to date.
Excellent platform to help promote and expand the reach of your work.
Great recommendations appear. Having the bid process link right in the email body helps a lot and saves time.
Add what you sell, get scheduled alerts, open documents or the official page, and use filters by region and method.