Latest US Range Hood Contracts & Bids

Lot 1: 20- foot box trailer - SPECIFICATIONS- Gross Vehicle Weight Rating ( GVWR): Minimum 14, 000 pounds. Size: Interior Net Height ( including beam width and lighting width): Minimum 7 feet, 4 inches ( 88 inches). Trailer Width: 8. 5 feet. Length: 20- foot box Both the 20- foot box and 24- foot box trailers to be built to work and look the same. Frame: Frame Type: Rectangular Tube. Frame Material: Aluminum ( Minimum 11 gauge for frame). Frame Configuration ( Spacing on Center): 12 inches of spacing. Nose Type: Flat. Tongue Option: A- Frame ( Extended). Front Jack Options: Electric. Ball Coupler: 2 5/16 inches. Wiring: Wire tubing around wires along the inside of frame. Roof: Rounded Aluminum with no seams. Seam: Aluminum ( Seamless). Vent: Minimum two ( 2) Vents Centered Vents must be hood covered and evenly distributed on center. Walls, Flooring, and Doors: Attachment Method: Screwless. Insulated walls, ceiling, and roof. Under Flooring Corrosion- Inhibiting Moisture Barrier. Rubber Tread Plate ( RTP) on interior floor and wheel wells. Skin Thickness: 0. 05 inches. Curb Side Door: Minimum 36 inches X 78 inches - forward placement. Rear Door Type: Heavy Duty Ramp Door with flap and extension Prefer gapless continuous hinge. Flooring Material: Aluminum. Axle, Suspension, Brake, and Tire: Number of Axles: Two ( 2) ( tandem) - 7, 000 pounds per axle. Type of Axles: Torsion. Brake System: Electric Tire Size: Must be ST235/80R16 Radial Tire Load Range: Minimum E- 10 ply rated. Spare tire and wheel must be included and the same as what on the trailer Cargo and Interior Area: E- Track t: Must be attached to frame by weld. Wall Locations: Three ( 3) recessed tracks the length of the entire wall - On center at 15 inches, 44 inches, 64 inches. Floor Locations: Three ( 3) recessed tracks - Entire length of floor - Placed on both outer edges and one on center. D- Rings: Attached to frame by weld. Floor Locations: Minimum six ( 6) recessed, 5, 000 pounds each, D- Ring anchors ( 2 - Front, 2 - On Center, 2 - Rear). Lighting: Inte
Lot 2: 24- foot box trailer - SPECIFICATIONS- Gross Vehicle Weight Rating ( GVWR): Minimum 14, 000 pounds. Size: Interior Net Height ( including beam width and lighting width): Minimum 7 feet, 4 inches ( 88 inches). Trailer Width: 8. 5 feet. Length: 24- foot box Both the 20- foot box and 24- foot box trailers to be built to work and look the same. Frame: Frame Type: Rectangular Tube. Frame Material: Aluminum ( Minimum 11 gauge for frame). Frame Configuration ( Spacing on Center): 12 inches of spacing. Nose Type: Flat. Tongue Option: A- Frame ( Extended). Front Jack Options: Electric. Ball Coupler: 2 5/16 inches. Wiring: Wire tubing around wires along the inside of frame. Roof: Rounded Aluminum with no seams. Seam: Aluminum ( Seamless). Vent: Minimum two ( 2) Vents Centered Vents must be hood covered and evenly distributed on center. Walls, Flooring, and Doors: Attachment Method: Screwless. Insulated walls, ceiling, and roof. Under Flooring Corrosion- Inhibiting Moisture Barrier. Rubber Tread Plate ( RTP) on interior floor and wheel wells. Skin Thickness: 0. 05 inches. Curb Side Door: Minimum 36 inches X 78 inches - forward placement. Rear Door Type: Heavy Duty Ramp Door with flap and extension Prefer gapless continuous hinge. Flooring Material: Aluminum. Axle, Suspension, Brake, and Tire: Number of Axles: Two ( 2) ( tandem) - 7, 000 pounds per axle. Type of Axles: Torsion. Brake System: Electric Tire Size: Must be ST235/80R16 Radial Tire Load Range: Minimum E- 10 ply rated. Spare tire and wheel must be included and the same as what on the trailer Cargo and Interior Area: E- Track: Must be attached to frame by weld. Wall Locations: Three ( 3) recessed tracks the length of the entire wall - On center at 15 inches, 44 inches, 64 inches. Floor Locations: Three ( 3) recessed tracks - Entire length of floor - Placed on both outer edges and one on center. D- Rings: Attached to frame by weld. Floor Locations: Minimum six ( 6) recessed, 5, 000 pounds each, D- Ring anchors ( 2 - Front, 2 - On Center, 2 - Rear). Lighting: Interi

Lot 1: 20- foot box trailer - SPECIFICATIONS- Gross Vehicle Weight Rating ( GVWR): Minimum 14, 000 pounds. Size: Interior Net Height ( including beam width and lighting width): Minimum 7 feet, 4 inches ( 88 inches). Trailer Width: 8. 5 feet. Length: 20- foot box Both the 20- foot box and 24- foot box trailers to be built to work and look the same. Frame: Frame Type: Rectangular Tube. Frame Material: Aluminum ( Minimum 11 gauge for frame). Frame Configuration ( Spacing on Center): 12 inches of spacing. Nose Type: Flat. Tongue Option: A- Frame ( Extended). Front Jack Options: Electric. Ball Coupler: 2 5/16 inches. Wiring: Wire tubing around wires along the inside of frame. Roof: Rounded Aluminum with no seams. Seam: Aluminum ( Seamless). Vent: Minimum two ( 2) Vents Centered Vents must be hood covered and evenly distributed on center. Walls, Flooring, and Doors: Attachment Method: Screwless. Insulated walls, ceiling, and roof. Under Flooring Corrosion- Inhibiting Moisture Barrier. Rubber Tread Plate ( RTP) on interior floor and wheel wells. Skin Thickness: 0. 05 inches. Curb Side Door: Minimum 36 inches X 78 inches - forward placement. Rear Door Type: Heavy Duty Ramp Door with flap and extension Prefer gapless continuous hinge. Flooring Material: Aluminum. Axle, Suspension, Brake, and Tire: Number of Axles: Two ( 2) ( tandem) - 7, 000 pounds per axle. Type of Axles: Torsion. Brake System: Electric Tire Size: Must be ST235/80R16 Radial Tire Load Range: Minimum E- 10 ply rated. Spare tire and wheel must be included and the same as what on the trailer Cargo and Interior Area: E- Track t: Must be attached to frame by weld. Wall Locations: Three ( 3) recessed tracks the length of the entire wall - On center at 15 inches, 44 inches, 64 inches. Floor Locations: Three ( 3) recessed tracks - Entire length of floor - Placed on both outer edges and one on center. D- Rings: Attached to frame by weld. Floor Locations: Minimum six ( 6) recessed, 5, 000 pounds each, D- Ring anchors ( 2 - Front, 2 - On Center, 2 - Rear). Lighting: Inte
Lot 2: 24- foot box trailer - SPECIFICATIONS- Gross Vehicle Weight Rating ( GVWR): Minimum 14, 000 pounds. Size: Interior Net Height ( including beam width and lighting width): Minimum 7 feet, 4 inches ( 88 inches). Trailer Width: 8. 5 feet. Length: 24- foot box Both the 20- foot box and 24- foot box trailers to be built to work and look the same. Frame: Frame Type: Rectangular Tube. Frame Material: Aluminum ( Minimum 11 gauge for frame). Frame Configuration ( Spacing on Center): 12 inches of spacing. Nose Type: Flat. Tongue Option: A- Frame ( Extended). Front Jack Options: Electric. Ball Coupler: 2 5/16 inches. Wiring: Wire tubing around wires along the inside of frame. Roof: Rounded Aluminum with no seams. Seam: Aluminum ( Seamless). Vent: Minimum two ( 2) Vents Centered Vents must be hood covered and evenly distributed on center. Walls, Flooring, and Doors: Attachment Method: Screwless. Insulated walls, ceiling, and roof. Under Flooring Corrosion- Inhibiting Moisture Barrier. Rubber Tread Plate ( RTP) on interior floor and wheel wells. Skin Thickness: 0. 05 inches. Curb Side Door: Minimum 36 inches X 78 inches - forward placement. Rear Door Type: Heavy Duty Ramp Door with flap and extension Prefer gapless continuous hinge. Flooring Material: Aluminum. Axle, Suspension, Brake, and Tire: Number of Axles: Two ( 2) ( tandem) - 7, 000 pounds per axle. Type of Axles: Torsion. Brake System: Electric Tire Size: Must be ST235/80R16 Radial Tire Load Range: Minimum E- 10 ply rated. Spare tire and wheel must be included and the same as what on the trailer Cargo and Interior Area: E- Track: Must be attached to frame by weld. Wall Locations: Three ( 3) recessed tracks the length of the entire wall - On center at 15 inches, 44 inches, 64 inches. Floor Locations: Three ( 3) recessed tracks - Entire length of floor - Placed on both outer edges and one on center. D- Rings: Attached to frame by weld. Floor Locations: Minimum six ( 6) recessed, 5, 000 pounds each, D- Ring anchors ( 2 - Front, 2 - On Center, 2 - Rear). Lighting: Interi

Lot 1: 20- foot box trailer - SPECIFICATIONS- Gross Vehicle Weight Rating ( GVWR): Minimum 14, 000 pounds. Size: Interior Net Height ( including beam width and lighting width): Minimum 7 feet, 4 inches ( 88 inches). Trailer Width: 8. 5 feet. Length: 20- foot box Both the 20- foot box and 24- foot box trailers to be built to work and look the same. Frame: Frame Type: Rectangular Tube. Frame Material: Aluminum ( Minimum 11 gauge for frame). Frame Configuration ( Spacing on Center): 12 inches of spacing. Nose Type: Flat. Tongue Option: A- Frame ( Extended). Front Jack Options: Electric. Ball Coupler: 2 5/16 inches. Wiring: Wire tubing around wires along the inside of frame. Roof: Rounded Aluminum with no seams. Seam: Aluminum ( Seamless). Vent: Minimum two ( 2) Vents Centered Vents must be hood covered and evenly distributed on center. Walls, Flooring, and Doors: Attachment Method: Screwless. Insulated walls, ceiling, and roof. Under Flooring Corrosion- Inhibiting Moisture Barrier. Rubber Tread Plate ( RTP) on interior floor and wheel wells. Skin Thickness: 0. 05 inches. Curb Side Door: Minimum 36 inches X 78 inches - forward placement. Rear Door Type: Heavy Duty Ramp Door with flap and extension Prefer gapless continuous hinge. Flooring Material: Aluminum. Axle, Suspension, Brake, and Tire: Number of Axles: Two ( 2) ( tandem) - 7, 000 pounds per axle. Type of Axles: Torsion. Brake System: Electric Tire Size: Must be ST235/80R16 Radial Tire Load Range: Minimum E- 10 ply rated. Spare tire and wheel must be included and the same as what on the trailer Cargo and Interior Area: E- Track t: Must be attached to frame by weld. Wall Locations: Three ( 3) recessed tracks the length of the entire wall - On center at 15 inches, 44 inches, 64 inches. Floor Locations: Three ( 3) recessed tracks - Entire length of floor - Placed on both outer edges and one on center. D- Rings: Attached to frame by weld. Floor Locations: Minimum six ( 6) recessed, 5, 000 pounds each, D- Ring anchors ( 2 - Front, 2 - On Center, 2 - Rear). Lighting: Inte
Lot 2: 24- foot box trailer - SPECIFICATIONS- Gross Vehicle Weight Rating ( GVWR): Minimum 14, 000 pounds. Size: Interior Net Height ( including beam width and lighting width): Minimum 7 feet, 4 inches ( 88 inches). Trailer Width: 8. 5 feet. Length: 24- foot box Both the 20- foot box and 24- foot box trailers to be built to work and look the same. Frame: Frame Type: Rectangular Tube. Frame Material: Aluminum ( Minimum 11 gauge for frame). Frame Configuration ( Spacing on Center): 12 inches of spacing. Nose Type: Flat. Tongue Option: A- Frame ( Extended). Front Jack Options: Electric. Ball Coupler: 2 5/16 inches. Wiring: Wire tubing around wires along the inside of frame. Roof: Rounded Aluminum with no seams. Seam: Aluminum ( Seamless). Vent: Minimum two ( 2) Vents Centered Vents must be hood covered and evenly distributed on center. Walls, Flooring, and Doors: Attachment Method: Screwless. Insulated walls, ceiling, and roof. Under Flooring Corrosion- Inhibiting Moisture Barrier. Rubber Tread Plate ( RTP) on interior floor and wheel wells. Skin Thickness: 0. 05 inches. Curb Side Door: Minimum 36 inches X 78 inches - forward placement. Rear Door Type: Heavy Duty Ramp Door with flap and extension Prefer gapless continuous hinge. Flooring Material: Aluminum. Axle, Suspension, Brake, and Tire: Number of Axles: Two ( 2) ( tandem) - 7, 000 pounds per axle. Type of Axles: Torsion. Brake System: Electric Tire Size: Must be ST235/80R16 Radial Tire Load Range: Minimum E- 10 ply rated. Spare tire and wheel must be included and the same as what on the trailer Cargo and Interior Area: E- Track: Must be attached to frame by weld. Wall Locations: Three ( 3) recessed tracks the length of the entire wall - On center at 15 inches, 44 inches, 64 inches. Floor Locations: Three ( 3) recessed tracks - Entire length of floor - Placed on both outer edges and one on center. D- Rings: Attached to frame by weld. Floor Locations: Minimum six ( 6) recessed, 5, 000 pounds each, D- Ring anchors ( 2 - Front, 2 - On Center, 2 - Rear). Lighting: Interi

Lot 1: 20- foot box trailer - SPECIFICATIONS- Gross Vehicle Weight Rating ( GVWR): Minimum 14, 000 pounds. Size: Interior Net Height ( including beam width and lighting width): Minimum 7 feet, 4 inches ( 88 inches). Trailer Width: 8. 5 feet. Length: 20- foot box Both the 20- foot box and 24- foot box trailers to be built to work and look the same. Frame: Frame Type: Rectangular Tube. Frame Material: Aluminum ( Minimum 11 gauge for frame). Frame Configuration ( Spacing on Center): 12 inches of spacing. Nose Type: Flat. Tongue Option: A- Frame ( Extended). Front Jack Options: Electric. Ball Coupler: 2 5/16 inches. Wiring: Wire tubing around wires along the inside of frame. Roof: Rounded Aluminum with no seams. Seam: Aluminum ( Seamless). Vent: Minimum two ( 2) Vents Centered Vents must be hood covered and evenly distributed on center. Walls, Flooring, and Doors: Attachment Method: Screwless. Insulated walls, ceiling, and roof. Under Flooring Corrosion- Inhibiting Moisture Barrier. Rubber Tread Plate ( RTP) on interior floor and wheel wells. Skin Thickness: 0. 05 inches. Curb Side Door: Minimum 36 inches X 78 inches - forward placement. Rear Door Type: Heavy Duty Ramp Door with flap and extension Prefer gapless continuous hinge. Flooring Material: Aluminum. Axle, Suspension, Brake, and Tire: Number of Axles: Two ( 2) ( tandem) - 7, 000 pounds per axle. Type of Axles: Torsion. Brake System: Electric Tire Size: Must be ST235/80R16 Radial Tire Load Range: Minimum E- 10 ply rated. Spare tire and wheel must be included and the same as what on the trailer Cargo and Interior Area: E- Track t: Must be attached to frame by weld. Wall Locations: Three ( 3) recessed tracks the length of the entire wall - On center at 15 inches, 44 inches, 64 inches. Floor Locations: Three ( 3) recessed tracks - Entire length of floor - Placed on both outer edges and one on center. D- Rings: Attached to frame by weld. Floor Locations: Minimum six ( 6) recessed, 5, 000 pounds each, D- Ring anchors ( 2 - Front, 2 - On Center, 2 - Rear). Lighting: Inte
Lot 2: 24- foot box trailer - SPECIFICATIONS- Gross Vehicle Weight Rating ( GVWR): Minimum 14, 000 pounds. Size: Interior Net Height ( including beam width and lighting width): Minimum 7 feet, 4 inches ( 88 inches). Trailer Width: 8. 5 feet. Length: 24- foot box Both the 20- foot box and 24- foot box trailers to be built to work and look the same. Frame: Frame Type: Rectangular Tube. Frame Material: Aluminum ( Minimum 11 gauge for frame). Frame Configuration ( Spacing on Center): 12 inches of spacing. Nose Type: Flat. Tongue Option: A- Frame ( Extended). Front Jack Options: Electric. Ball Coupler: 2 5/16 inches. Wiring: Wire tubing around wires along the inside of frame. Roof: Rounded Aluminum with no seams. Seam: Aluminum ( Seamless). Vent: Minimum two ( 2) Vents Centered Vents must be hood covered and evenly distributed on center. Walls, Flooring, and Doors: Attachment Method: Screwless. Insulated walls, ceiling, and roof. Under Flooring Corrosion- Inhibiting Moisture Barrier. Rubber Tread Plate ( RTP) on interior floor and wheel wells. Skin Thickness: 0. 05 inches. Curb Side Door: Minimum 36 inches X 78 inches - forward placement. Rear Door Type: Heavy Duty Ramp Door with flap and extension Prefer gapless continuous hinge. Flooring Material: Aluminum. Axle, Suspension, Brake, and Tire: Number of Axles: Two ( 2) ( tandem) - 7, 000 pounds per axle. Type of Axles: Torsion. Brake System: Electric Tire Size: Must be ST235/80R16 Radial Tire Load Range: Minimum E- 10 ply rated. Spare tire and wheel must be included and the same as what on the trailer Cargo and Interior Area: E- Track: Must be attached to frame by weld. Wall Locations: Three ( 3) recessed tracks the length of the entire wall - On center at 15 inches, 44 inches, 64 inches. Floor Locations: Three ( 3) recessed tracks - Entire length of floor - Placed on both outer edges and one on center. D- Rings: Attached to frame by weld. Floor Locations: Minimum six ( 6) recessed, 5, 000 pounds each, D- Ring anchors ( 2 - Front, 2 - On Center, 2 - Rear). Lighting: Interi

The Navajo Nation Department of Child Care and Development (DCCD) is seeking proposals for fire inspection services at various child care centers. The bid deadline is June 27, 2025, at 5:00 PM MDT. Vendors must be licensed, bonded, and have general liability insurance. A written workplan schedule must be provided, and services must be performed Monday through Friday, between 9 AM and 11 AM, and/or 2 PM and 5 PM. Vendors must comply with all applicable codes and standards, including Navajo Nation Occupational Safety and Health Administration (NNOHSA) and National Fire Protection Association (NFPA) standards. Inspection reports and invoices must be submitted to the DCCD facility maintenance and/or planner estimator. Vendors are responsible for the disposal of damaged and replaced materials to an approved environmental protection agency landfill, off the Navajo reservation. Vendors must respond to all requested emergency services within 24 hours upon notification. The successful vendor will be responsible for providing all equipment, labor, materials, supervision, and transportation. The contract term is approximately four years with an option for a negotiable contract or a purchase order. The proposal must include detailed information on approach to scope of work, providing service and delivery, inspection with report, credentials, and past performance. The technical proposal factors will be rated on a scale of **** with weight relations. Cost factors will be evaluated for reasonableness, realism, and cost-effectiveness. The proposal must include detailed cost for the overall proposal with Navajo Nation tax included. The Navajo Nation reserves the right to incorporate standard contract provisions into any contract negotiations. The Navajo Nation is a sovereign government and all contracts entered into as a result of the RFP shall comply with Navajo Nation law, rules and regulations, including the Navajo preference in employment act, the Navajo Nation business opportunity act, 5 N. N. C. 201 et. seq. , Navajo procurement act, 12 N. N. C. 301, and applicable federal law, rules and regulations, 45 CFR part **** C 45 health safety requirements regarding building and physical premises safety.