Wall Hook Government Bids & RFPs

Lot 1: Tracked Excavator with operator must be Diesel powered, minimum of 145 HP, and a minimum of 45, 000 LB operating weight. Vendor must be able to provide various buckets between 28 IN to 52 IN wide, with hydraulic grapple thumb attachment mounted on boom stick. Vendor must be capable of providing up to 2 of these excavators at any time. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________ ONLY ONLINE BIDS WILL BE ACCEPTED FOR THIS RFB. Emailed and hard copies delivered by any method WILL NOT BE ACCEPTED. See attached document How to Respond to an Online Bid through the Kentucky Vendor Self Service site ( updated). pdf. Please enter contact person, phone number and email in the Comments Section. Vendors should review and update, if necessary, all addresses and contact persons for their account prior to bid submission. This information will carry forward to a contract if awarded, therefore please ensure all information is correct.

Lot 2: Tracked Excavator must be Diesel powered, minimum of 175 HP, and have a minimum 58, 000 LB operating weight. Equipped with a minimum 50 FT Long Reach boom at ground level from center of machine, various buckets between 28 IN to 52 IN wide. Toothed and smooth buckets must be available, and an operator. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 3: SHALL BE COMPATIBLE WITH LINE ITEM # 1. MINIMUM 4, 000 FT- LBS ( ENERGY CLASS) TO BE USED ON TRACK EXCAVATOR WITH 25' BOOM, MIN GROUND WEIGHT OF 46, 000 LBS OR GRATER AND MIN OF 145 HP OR GREATER. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 4: MINIMUM 300 FT- LBS ( ENERGY CLASS) TO BE USED ON HIGH FLOW HYDRAULIC SKID STEER OR LONG REACH 50 FT MINIMUM EXCAVATOR. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 5: MULCHING HEAD WITH A MIN OF 24" CUTTING WIDTH. ATTACHMENT SHALL ALSO INCLUDE 90- DEGREE TILT MOUNT. TO BE USED ON TRACK EXCAVATOR WITH A MINIMUM OF 145 HP AND 46, 000 LB MINIMUM WEIGHT. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 6: MULCHING HEAD WITH A MINIMUM OF 36" CUTTING WIDTH. ATTACHMENT SHALL ALSO INCLUDE 90 DEGREE TILT MOUNT. TO BE USED ON TRACK EXCAVATOR. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 7: TRUCK RENTAL W/OPERATOR, FOR ON HIGHWAY USE, TANDEM WITH 350 HP MINIMUM, WITH MINIMUM 16 FOOT BED. VENDOR SHALL BE ABLE TO PROVIDE UP TO 12 TRUCKS. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 8: ARTICULATED TRUCK RENTAL W/OPERATOR, 25 TON OR GREATER 4 X 4 Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 9: 60 HP MIN DIESEL ENGINE, EQUIPPED WITH ANGLE/TILT AND CORNER CUTTING BLADE. 15, 000 LB MINIMUM OPERATING WEIGHT W/OPERATOR. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 10: 140 HP OR GREATER DIESEL ENGINE, EQUIPPED WITH ANGLE/TILT AND CORNER BLADE. 33, 000 LB MINIMUM OPERATING WEIGHT W/OPERATOR. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 11: OUTPUT OF MINIMAL 6 KW @60HZ WITH A HEIGHT OF 12 TO 30 FT, 4 LIGHTS PER UNIT. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 12: TRACKED SKID STEER MIN OF 70 HP WITH HIGH FLOW HYDRAULIC SYSTEM TO OPERATE SPECIAL ATTACHMENTS. SKID STEER WILL INCLUDE THE FOLLOWING BASIC ATTACHMENTS; BUCKET, HEAVY DUTY FORKS, SCRAP GRAPPLE BUCKET. THE FOLLOWING TWO ITEMS ARE HYDRAULIC FLOW SKIED STEER ATTACHMENTS THAT WILL BE PAID BY THE HOUR IN ADDITION TO SKID STEER/OPERATOR WHEN USED: 24 AND 40 INCH COLD PLANER ( MILLING HEAD) Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 13: CAPABLE OF WORKING WITH HIGH FLOW HYDRAULIC SKID STEER, MIN 70 HP. HIGH FLOW TYPE W/HYDRAULIC SIDE SHIFT. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 14: CAPABLE OF WORKING WITH HIGH FLOW HYDRAULIC SKID STEER 70 HP. HIGH FLOW TYPE W/HYDRAULIC SIDE SHIFT. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 15: CAPABLE OF WORKING WITH HIGH FLOW HYDRAULIC SKID STEER MIN 70 HP. HYDRAULIC- DRIVEN CONVEYOR HEAVY DUTY WITH 10" HEAD AND TAIL PULLEYS AND VARIABLE SPEED, RIGHT OR LEFT SIDE DISCHARGE WITH HYDRAULIC WIDTH/HEIGHT ADJUSTMENT. ADJUSTABLE SHOULDERING ANGLE AND SHOULDER WIDTHS OF 1- 3. 5', WEIGHT ( EMPTY) **** LBS. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 16: 125 HP MINIMUM WITH 84" SMOOTH DRUM AND ATTACHABLE SHEEP FOOT DRUM PAD. 10 TON MINIMUM OPERATING WEIGHT. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 17: 140 HP MINIMUM, 40 INCH WIDE DRUM CAPABLE TO MILL 12 INCHES IN DEPTH, MOUNTED ON MINIMUM 22, 000 LB RUBBER TIRED LOADER. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 18: ARTICULATED WHEEL LOADER W/OPERATOR A MINIMUM 150 HP AND 3. 5 CU YD MIN BUCKET CAPACITY. 18, 000 LB MINIMUM GROUND WEIGHT. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 19: Provide certified flaggers and traffic control for maintenance operations on highway projects. Price per hour includes one flagger, warning signs, flagger paddles, PPE, and work zone set up in accordance with KYTC Standard Drawings. Vendor must be able to provide up to 6 flaggers, at any one time, if needed. With permission from the Engineer, the vendor may elect to use temporary traffic signals or portable traffic signals with appropriate signing in accordance with MUTCD or as directed by the Engineer. Vendor must also place and maintain appropriate work zone signing, flagger signs, flagger paddles, etc. in accordance with the MUTCD or as directed by the Engineer. Flaggers are required to wear appropriate safety equipment and must stay in constant communication with one another. Flaggers must work in accordance with Kentucky Dept of Highways Standard Drawings, in accordance with the MUTCD, and must comply with Section 112 of the current Standard Specifications for Road and Bridge Construction at all times. Payment will be made for the total number of man- hours worked for supplied traffic control each day. If vendor supplies portable traffic signals, payment by the man- hour will be based on number of man- hours flaggers would have been utilized instead of portable signals.

Lot 20: OPERATING WEIGHT 63, 000 LBS MINIMUM, NET POWER 180 HP MIN, DIESEL- POWERED, 30 METRIC TON MIN CLASS EXCAVATOR, EQUIPPED WITH UP TO 48" WIDE CY BUCKET WITH TEETH. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 21: SHALL BE COMPATIBLE WITH TRACK EXCAVATOR, MIN 180 HP, 63, 000 LB MIN WEIGHT. MIN 8, 000 FT- LBS ( ENERGY CLASS) Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 22: CAPABLE OF WORKING WITH HIGH- FLOW HYDRAULIC SKID STEER, QUICK ATTACH, MINIMUM 6- FOOT CUT & 7- FOOT LONG. MINIMUM 70 HP. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 23: IMPACT FREQUENCY RANGE 700- ****, OPERATING RANGE ****- **** PSI. COMPATIBLE WITH SKID STEER WITH HIGH FLOW HYDRAULICS MIN 70 HP. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 24: MINIMUM 12 FT BLADE, MINIMUM 130 HP, 29, 000 LB OPER WEIGHT Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 25: MUST BE 4- WHEEL DRIVE EQUIPPED WITH FLASHING SAFETY LIGHTS. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 26: TREE TRIMMER SHALL MEET THE FOLLOWING MIN REQUIREMENTS: OPERATING WEIGHT - 24, 300 LBS. NET POWER - 127 HP, 75' REACH FROM GROUND, AND COMPOSITE BOOM ELECTRICALLY INSULATED. THIS EQUIPMENT SHALL BE EQUIPPED WITH A FRONT- MOUNTED HYDRAULIC BLADE THAT IS CAPABLE OF BEING OPERATED FROM THE CAB OF THE MACHINE. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 27: SHALL BE COMPATIBLE WITH LINE ITEM # 1. TO BE USED ON TRACK EXCAVATOR WITH BOOM. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 28: SHALL MEET THE MINIMUM SPECIFICATIONS: Excavator must be diesel- powered, minimum 52 HP, minimum 15, 900 LB operating weight with operator. Equipped with rubber tracks, front- mounted push blade, reduced tail swing of 26 inches or less, and offset boom for mobility and confined workspace. Vendor must be able to provide various buckets between 18 IN to 52 IN wide, toothed and smooth buckets, with hydraulic grapple thumb attachment mounted on boom stick as needed. Vendor must be capable of providing 3 of these excavators at any time. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 29: X- Large Excavator w/Operator Hydraulic Tracked Excavator must be a minimum of 350 HP, diesel- powered, and have a minimum operating weight of 105, 000 lbs. Vendor capable of providing a minimum 48- inch- wide general- purpose bucket. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 30: HYDRAULIC BREAKER ATTACHMENT Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 31: SHALL MEET THE MINIMUM SPECIFICATIONS: TRUCK MOUNTED HYDRAULIC CRANE 55 TON W/OPERATOR, DIESEL POWERED 392 HP SINGLE ENGINE, 73, 000 POUND OPERATING WEIGHT, 110 FOOT BOOM LENGTH, 8X4X4 AXLE CONFIGURATION, MINIMUM LIFT CAPACITY OF 54. 5 TONS. ABILITY TO LIFT AND SWING 9. 1 TON 30' LONG CONCRETE BARRIER WALL AT A 40 FOOT FULL RADIUS. SUPPLY 1. 25 TO 2 CY CLAMSHELL BUCKET AS NEEDED TO DREDGE CHANNELS, REMOVE FLOOD DEBRIS, CLEAN MUD SLIDES FROM ROADWAYS, OR REMOVE AND LOAD TREES/BRUSH FROM RIVER BRIDGE PIERS. PRICE PER HOUR INCLUDES SUPPLYING AS NEEDED THE ABILITY TO PROVIDE BLOCKS, HOOKS, TAG LINES, RIGGING, CABLES, AND CRIBBING. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 32: Must be minimum 65 HP. Strike- off blade that can vary in length from 1 foot to at least 6 feet. 18- inch- wide variable- speed hydraulic drive conveyor system. Width of receiving hopper a minimum of 9 Ft. with a reinforced rubber bib. To be MIDLAND SPD- 6 Self Propelled or approved equivalent. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 1: Tracked Excavator with operator must be Diesel powered, minimum of 145 HP, and a minimum of 45, 000 LB operating weight. Vendor must be able to provide various buckets between 28 IN to 52 IN wide, with hydraulic grapple thumb attachment mounted on boom stick. Vendor must be capable of providing up to 2 of these excavators at any time. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________ ONLY ONLINE BIDS WILL BE ACCEPTED FOR THIS RFB. Emailed and hard copies delivered by any method WILL NOT BE ACCEPTED. See attached document How to Respond to an Online Bid through the Kentucky Vendor Self Service site ( updated). pdf. Please enter contact person, phone number and email in the Comments Section. Vendors should review and update, if necessary, all addresses and contact persons for their account prior to bid submission. This information will carry forward to a contract if awarded, therefore please ensure all information is correct.

Lot 2: Tracked Excavator must be Diesel powered, minimum of 175 HP, and have a minimum 58, 000 LB operating weight. Equipped with a minimum 50 FT Long Reach boom at ground level from center of machine, various buckets between 28 IN to 52 IN wide. Toothed and smooth buckets must be available, and an operator. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 3: SHALL BE COMPATIBLE WITH LINE ITEM # 1. MINIMUM 4, 000 FT- LBS ( ENERGY CLASS) TO BE USED ON TRACK EXCAVATOR WITH 25' BOOM, MIN GROUND WEIGHT OF 46, 000 LBS OR GRATER AND MIN OF 145 HP OR GREATER. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 4: MIN 300 FT- LBS ( ENERGY CLASS) TO BE USED ON HIGH FLOW HYDRAULIC SKID STEER OR LONG REACH 50 FT MINIMUM EXCAVATOR. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 5: MULCHING HEAD WITH A MIN OF 24" CUTTING WIDTH. ATTACHMENT SHALL ALSO INCLUDE 90- DEGREE TILT MOUNT. TO BE USED ON TRACK EXCAVATOR WITH A MINIMUM OF 145 HP AND 46, 000 LB MINIMUM WEIGHT. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 6: MULCHING HEAD WITH A MINIMUM OF 36" CUTTING WIDTH. ATTACHMENT SHALL ALSO INCLUDE 90 DEGREE TILT MOUNT. TO BE USED ON TRACK EXCAVATOR. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 7: TRUCK RENTAL W/OPERATOR, FOR ON HIGHWAY USE, TANDEM WITH 350 HP MINIMUM, WITH MINIMUM 16 FOOT BED. VENDOR SHALL BE ABLE TO PROVIDE UP TO 12 TRUCKS. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 8: ARTICULATED TRUCK RENTAL W/OPERATOR, 25 TON OR GREATER 4 X 4 Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 9: 60 HP MIN DIESEL ENGINE, EQUIPPED WITH ANGLE/TILT AND CORNER CUTTING BLADE. 15, 000 LB MINIMUM OPERATING WEIGHT W/OPERATOR. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 10: 140 HP OR GREATER DIESEL ENGINE, EQUIPPED WITH ANGLE/TILT AND CORNER BLADE. 33, 000 LB MINIMUM OPERATING WEIGHT W/OPERATOR. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 11: OUTPUT OF MINIMAL 6 KW @60HZ WITH A HEIGHT OF 12 TO 30 FT, 4 LIGHTS PER UNIT. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 12: TRACKED SKID STEER MIN OF 70 HP WITH HIGH FLOW HYDRAULIC SYSTEM TO OPERATE SPECIAL ATTACHMENTS. SKID STEER WILL INCLUDE THE FOLLOWING BASIC ATTACHMENTS; BUCKET, HEAVY DUTY FORKS, SCRAP GRAPPLE BUCKET. THE FOLLOWING TWO ITEMS ARE HYDRAULIC FLOW SKIED STEER ATTACHMENTS THAT WILL BE PAID BY THE HOUR IN ADDITION TO SKID STEER/OPERATOR WHEN USED: 24 AND 40 INCH COLD PLANER ( MILLING HEAD) Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 13: CAPABLE OF WORKING WITH HIGH FLOW HYDRAULIC SKID STEER, MIN 70 HP. HIGH FLOW TYPE W/HYDRAULIC SIDE SHIFT. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 14: CAPABLE OF WORKING WITH HIGH FLOW HYDRAULIC SKID STEER 70 HP. HIGH FLOW TYPE W/HYDRAULIC SIDE SHIFT. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 15: CAPABLE OF WORKING WITH HIGH FLOW HYDRAULIC SKID STEER MIN 70 HP. HYDRAULIC- DRIVEN CONVEYOR HEAVY DUTY WITH 10" HEAD AND TAIL PULLEYS AND VARIABLE SPEED, RIGHT OR LEFT SIDE DISCHARGE WITH HYDRAULIC WIDTH/HEIGHT ADJUSTMENT. ADJUSTABLE SHOULDERING ANGLE AND SHOULDER WIDTHS OF 1- 3. 5', WEIGHT ( EMPTY) **** LBS. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 16: 125 HP MINIMUM WITH 84" SMOOTH DRUM AND ATTACHABLE SHEEP FOOT DRUM PAD. 10 TON MINIMUM OPERATING WEIGHT. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 17: 140 HP MINIMUM, 40 INCH WIDE DRUM CAPABLE TO MILL 12 INCHES IN DEPTH, MOUNTED ON MINIMUM 22, 000 LB RUBBER TIRED LOADER. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 18: ARTICULATED WHEEL LOADER W/OPERATOR A MINIMUM 150 HP AND 3. 5 CU YD MIN BUCKET CAPACITY. 18, 000 LB MINIMUM GROUND WEIGHT. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 19: Provide certified flaggers and traffic control for maintenance operations on highway projects. Price per hour includes one flagger, warning signs, flagger paddles, PPE, and work zone set up in accordance with KYTC Standard Drawings. Vendor must be able to provide up to 6 flaggers, at any one time, if needed. With permission from the Engineer, the vendor may elect to use temporary traffic signals or portable traffic signals with appropriate signing in accordance with MUTCD or as directed by the Engineer. Vendor must also place and maintain appropriate work zone signing, flagger signs, flagger paddles, etc. in accordance with the MUTCD or as directed by the Engineer. Flaggers are required to wear appropriate safety equipment and must stay in constant communication with one another. Flaggers must work in accordance with Kentucky Dept of Highways Standard Drawings, in accordance with the MUTCD, and must comply with Section 112 of the current Standard Specifications for Road and Bridge Construction at all times. Payment will be made for the total number of man- hours worked for supplied traffic control each day. If vendor supplies portable traffic signals, payment by the man- hour will be based on number of man- hours flaggers would have been utilized instead of portable signals.

Lot 20: OPERATING WEIGHT 63, 000 LBS MINIMUM, NET POWER 180 HP MIN, DIESEL- POWERED, 30 METRIC TON MIN CLASS EXCAVATOR, EQUIPPED WITH UP TO 48" WIDE CY BUCKET WITH TEETH. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 21: SHALL BE COMPATIBLE WITH TRACK EXCAVATOR, MIN 180 HP, 63, 000 LB MIN WEIGHT. MIN 8, 000 FT- LBS ( ENERGY CLASS) Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 22: CAPABLE OF WORKING WITH HIGH- FLOW HYDRAULIC SKID STEER, QUICK ATTACH, MINIMUM 6- FOOT CUT & 7- FOOT LONG. MINIMUM 70 HP. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 23: IMPACT FREQUENCY RANGE 700- ****, OPERATING RANGE ****- **** PSI. COMPATIBLE WITH SKID STEER WITH HIGH FLOW HYDRAULICS MIN 70 HP. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 24: MINIMUM 12 FT BLADE, MINIMUM 130 HP, 29, 000 LB OPER WEIGHT Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 25: MUST BE 4- WHEEL DRIVE EQUIPPED WITH FLASHING SAFETY LIGHTS. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 26: TREE TRIMMER SHALL MEET THE FOLLOWING MIN REQUIREMENTS: OPERATING WEIGHT - 24, 300 LBS. NET POWER - 127 HP, 75' REACH FROM GROUND, AND COMPOSITE BOOM ELECTRICALLY INSULATED. THIS EQUIPMENT SHALL BE EQUIPPED WITH A FRONT- MOUNTED HYDRAULIC BLADE THAT IS CAPABLE OF BEING OPERATED FROM THE CAB OF THE MACHINE. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 27: SHALL BE COMPATIBLE WITH LINE ITEM # 1. TO BE USED ON TRACK EXCAVATOR WITH BOOM. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 28: SHALL MEET THE MINIMUM SPECIFICATIONS: Excavator must be diesel- powered, minimum 52 HP, minimum 15, 900 LB operating weight with operator. Equipped with rubber tracks, front- mounted push blade, reduced tail swing of 26 inches or less, and offset boom for mobility and confined workspace. Vendor must be able to provide various buckets between 18 IN to 52 IN wide, toothed and smooth buckets, with hydraulic grapple thumb attachment mounted on boom stick as needed. Vendor must be capable of providing 3 of these excavators at any time. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 29: X- Large Excavator w/Operator Hydraulic Tracked Excavator must be a minimum of 350 HP, diesel- powered, and have a minimum operating weight of 105, 000 lbs. Vendor capable of providing a minimum 48- inch- wide general- purpose bucket. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 30: HYDRAULIC BREAKER ATTACHMENT Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 31: SHALL MEET THE MINIMUM SPECIFICATIONS: TRUCK MOUNTED HYDRAULIC CRANE 55 TON W/OPERATOR, DIESEL POWERED 392 HP SINGLE ENGINE, 73, 000 POUND OPERATING WEIGHT, 110 FOOT BOOM LENGTH, 8X4X4 AXLE CONFIGURATION, MINIMUM LIFT CAPACITY OF 54. 5 TONS. ABILITY TO LIFT AND SWING 9. 1 TON 30' LONG CONCRETE BARRIER WALL AT A 40 FOOT FULL RADIUS. SUPPLY 1. 25 TO 2 CY CLAMSHELL BUCKET AS NEEDED TO DREDGE CHANNELS, REMOVE FLOOD DEBRIS, CLEAN MUD SLIDES FROM ROADWAYS, OR REMOVE AND LOAD TREES/BRUSH FROM RIVER BRIDGE PIERS. PRICE PER HOUR INCLUDES SUPPLYING AS NEEDED THE ABILITY TO PROVIDE BLOCKS, HOOKS, TAG LINES, RIGGING, CABLES, AND CRIBBING. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 32: Must be minimum 65 HP. Strike- off blade that can vary in length from 1 foot to at least 6 feet. 18- inch- wide variable- speed hydraulic drive conveyor system. Width of receiving hopper a minimum of 9 Ft. with a reinforced rubber bib. To be MIDLAND SPD- 6 Self Propelled or approved equivalent. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 1: TRACK HOE, HYDRAULIC, CRAWLER MOUNTED, DIESEL POWERED W/OPERATOR TO MEET THE FOLLOWING SPECIFICATIONS: BOOM LENGTH OF 25 FT MIN, MINIMUM 145 HP OR GREATER, 1. 5 CY BUCKET MIN, 42 INCHES WIDE TOOTHED ROCK BUCKET, MIN GROUND OPERATING WEIGHT OF 46, 000 LBS. EXCAVATOR SHALL HAVE HYDRAULIC THUMB ATTACHMENT OR A GRAPPLE ATTACHMENT AVAILABLE FOR USE. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________ ONLY ONLINE BIDS WILL BE ACCEPTED FOR THIS RFB. Emailed and hard copies delivered by any method WILL NOT BE ACCEPTED. See attached document How to Respond to an Online Bid through the Kentucky Vendor Self Service site ( updated). pdf. Please enter contact person, phone number and email in the Comments Section. Vendors should review and update, if necessary, all addresses and contact persons for their account prior to bid submission. This information will carry forward to a contract if awarded, therefore please ensure all information is correct.

Lot 2: TRACK HOE, HYDRAULIC, CRAWLER MOUNTED, DIESEL POWERED W/OPERATOR TO MEET THE FOLLOWING MIN SPECIFICATIONS: LONG REACH BOOM 50 FT AND BUCKET SIZE 1 CY, 140 HP, GROUND OPERATING WEIGHT OF 48, 000 LBS. EXCAVATOR SHALL HAVE HYDRAULIC THUMB ATTACHMENT OR A GRAPPLE ATTACHMENT AVAILABLE FOR USE. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 3: SHALL BE COMPATIBLE WITH LINE ITEM # 1. MINIMUM 4, 000 FT- LBS ( ENERGY CLASS) TO BE USED ON TRACK EXCAVATOR WITH 25' BOOM, MIN GROUND WEIGHT OF 46, 000 LBS OR GRATER AND MIN OF 145 HP OR GREATER. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 4: MIN 300 FT- LBS ( ENERGY CLASS) TO BE USED ON HIGH FLOW HYDRAULIC SKID STEER OR LONG REACH 50 FT MINIMUM EXCAVATOR. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 5: MULCHING HEAD WITH A MIN OF 24" CUTTING WIDTH. ATTACHMENT SHALL ALSO INCLUDE 90 DEGREE TILT MOUNT. TO BE USED ON TRACK EXCAVATOR 25' BOOM, MIN OF 145 HP AND 46, 000 LB MIN WEIGHT. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 6: MULCHING HEAD WITH A MINIMUM OF 36" CUTTING WIDTH. ATTACHMENT SHALL ALSO INCLUDE 90 DEGREE TILT MOUNT. TO BE USED ON TRACK EXCAVATOR 25' AND 50' BOOM LENGTH. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 7: TRUCK RENTAL W/OPERATOR, FOR ON HIGHWAY USE, TANDEM WITH 350 HP MINIMUM, WITH MINIMUM 16 FOOT BED. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 8: ARTICULATED TRUCK RENTAL W/OPERATOR , 25 TON OR GREATER 4 X 4 Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 9: 60 HP MIN DIESEL ENGINE, EQUIPPED WITH ANGLE/TILT AND CORNER CUTTING BLADE. 15, 000 LB MINIMUM OPERATING WEIGHT W/OPERATOR. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 10: 140 HP OR GREATER DIESEL ENGINE, EQUIPPED WITH ANGLE/TILT AND CORNER BLADE. 33, 000 LB MINIMUM OPERATING WEIGHT W/OPERATOR. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 11: OUTPUT OF MINIMAL 6 KW @60HZ WITH A HEIGHT OF 12 TO 30 FT, 4 LIGHTS PER UNIT. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 12: TRACKED SKID STEER MIN OF 70 HP WITH HIGH FLOW HYDRAULIC SYSTEM TO OPERATE SPECIAL ATTACHMENTS. SKID STEER WILL INCLUDE THE FOLLOWING BASIC ATTACHMENTS; BUCKET, HEAVY DUTY FORKS, SCRAP GRAPPLE BUCKET. THE FOLLOWING TWO ITEMS ARE HYDRAULIC FLOW SKIED STEER ATTACHMENTS THAT WILL BE PAID BY THE HOUR IN ADDITION TO SKID STEER/OPERATOR WHEN USED: 24 AND 40 INCH COLD PLANER ( MILLING HEAD) Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 13: CAPABLE OF WORKING WITH HIGH FLOW HYDRAULIC SKID STEER, MIN 70 HP. HIGH FLOW TYPE W/HYDRAULIC SIDE SHIFT. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 14: CAPABLE OF WORKING WITH HIGH FLOW HYDRAULIC SKID STEER 70 HP. HIGH FLOW TYPE W/HYDRAULIC SIDE SHIFT. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 15: CAPABLE OF WORKING WITH HIGH FLOW HYDRAULIC SKID STEER MIN 70 HP. HYDRAULIC- DRIVEN CONVEYOR HEAVY DUTY WITH 10" HEAD AND TAIL PULLEYS AND VARIABLE SPEED, RIGHT OR LEFT SIDE DISCHARGE WITH HYDRAULIC WIDTH/HEIGHT ADJUSTMENT. ADJUSTABLE SHOULDERING ANGLE AND SHOULDER WIDTHS OF 1- 3. 5', WEIGHT ( EMPTY) **** LBS. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 16: 125 HP MINIMUM WITH 84" SMOOTH DRUM AND ATTACHABLE SHEEP FOOT DRUM PAD. 10 TON MINIMUM OPERATING WEIGHT. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 17: 140 HP MINIMUM, 40 INCH WIDE DRUM CAPABLE TO MILL 12 INCHES IN DEPTH, MOUNTED ON MINIMUM 22, 000 LB RUBBER TIRED LOADER. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 18: ARTICULATED WHEEL LOADER W/OPERATOR A MINIMUM 150 HP AND 3. 5 CU YD MIN BUCKET CAPACITY. 18, 000 LB MINIMUM GROUND WEIGHT. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 19: PROVIDE FLAGGERS AND TRAFFIC CONTROL FOR MAINTENANCE OPERATIONS ON STREETS AND ROADS. PRICE PER MANHOUR INCLUDES FLAGGERS, WARNING SIGNS, FLAGGERS PADDLES, PPE, AND SET UP IN ACCORDANCE WITH KYTC STANDARD DRAWINGS. PRICE PER MANHOUR IS FOR EACH FLAGGER USED. VENDOR SHALL PROVIDE UP TO 6 FLAGGERS ( IF NEEDED) Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 20: OPERATING WEIGHT 63, 000 LBS MINIMUM, NET POWER 180 HP MIN, DIESEL POWERED, 30 METRIC TON MIN CLASS EXCAVATOR, EQUIPPED WITH UP TO 48" WIDE CY BUCKET WITH TEETH. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 21: SHALL BE COMPATIBLE WITH TRACK EXCAVATOR 25 FT BOOM, MIN 180 HP 63, 000 LB MIN WEIGHT. MIN 8, 000 FT- LBS ( ENERGY CLASS) Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 22: CAPABLE OF WORKING WITH HIGH FLOW HYDRAULIC SKID STEER, QUICK ATTACH, MINIMUM 6 FOOT CUT & 7 FT LONG. MIN 70 HP. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 23: IMPACT FREQUENCY RANGE 700- ****, OPERATING RANGE ****- **** PSI. COMPATIBLE WITH SKID STEER WITH HIGH FLOW HYDRAULICS MIN 70 HP. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 24: MINIMUM 12 FT BLADE MIN 130 HP, 29, 000 LB OPER WEIGHT Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 25: MUST BE 4 WHEEL DRIVE EQUIPPED WITH FLASHING SAFETY LIGHTS. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 26: TREE TRIMMER SHALL MEET THE FOLLOWING MIN REQUIREMENTS: OPERATING WEIGHT - 24, 300 LBS. NET POWER - 127 HP, 75' REACH FROM GROUND, AND COMOPOSITE BOOM ELECTRICALLY INSULATED. THIS EQUIPMENT SHALL BE EQUIPPED WITH A FRON MOUNTED HYDRAULIC BLADE THAT IS CAPABLE OF BEING OPERATED FROM THE CAB OF THE MACHINE. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 27: SHALL BE COMPATIBLE WITH LINE ITEM # 1. TO BE USED ON TRACK EXCAVATOR WITH BOOM. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 28: SHALL MEET THE MINIMUM SPECIFICATIONS: HYDRAULIC TRACKED EXCAVATOR W/OPERATOR; DIESEL POWERED 52 HP, 15, 900 POUND OPERATING WEIGHT, 7 METRIC TONS. RUBBER TRACKS, FRONT MOUNTED PUSH BLADE, ZERO TURN, OFFSET BOOM FOR MOBILITY AND CONFINED SPACE WORK. AS NEEDED THE ABILITY TO PROVIDE A 3 FOOT OR 18 INCH WIDE GENERAL PURPOSE BUCKET. VENDOR IS TO PROVIDE ON ( 1) PIECE OF THIS EQUIPMENT AT ANY GIVEN TIME. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 29: LARGE EXCAVATOR WITH BUCKET. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 30: HYDRAULIC BREAKER ATTACHMENT Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 31: SHALL MEET THE MINIMUM SPECIFICATIONS: TRUCK MOUNTED HYDRAULIC CRANE 55 TON W/OPERATOR, DIESEL POWERED 392 HP SINGLE ENGINE, 73, 000 POUND OPERATING WEIGHT, 110 FOOT BOOM LENGTH, 8X4X4 AXLE CONFIGURATION, MINIMUM LIFT CAPACITY OF 54. 5 TONS. ABILITY TO LIFT AND SWING 9. 1 TON 30' LONG CONCRETE BARRIER WALL AT A 40 FOOT FULL RADIUS. SUPPLY 1. 25 TO 2 CY CLAMSHELL BUCKET AS NEEDED TO DREDGE CHANNELS, REMOVE FLOOD DEBRIS, CLEAN MUD SLIDES FROM ROADWAYS, OR REMOVE AND LOAD TREES/BRUSH FROM RIVER BRIDGE PIERS. PRICE PER HOUR INCLUDES SUPPLYING AS NEEDED THE ABILITY TO PROVIDE BLOCKS, HOOKS, TAG LINES, RIGGING, CABLES, AND CRIBBING. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 32: THE VENDOR SHALL BE PAID $ **** IN EMERGENCY MOBILIZATION COSTS FOR EACH PIECE OF REQUIRED EQUIPMENT THAT IS DELIVERED TO THE WORK SITE AND BEGINS WORK WITHIN 24 HOURS OF NOTIFICATION. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 1: TRACK HOE, HYDRAULIC, CRAWLER MOUNTED, DIESEL POWERED W/OPERATOR TO MEET THE FOLLOWING SPECIFICATIONS: BOOM LENGTH OF 25 FT MIN, MINIMUM 145 HP OR GREATER, 1. 5 CY BUCKET MIN, 42 INCHES WIDE TOOTHED ROCK BUCKET, MIN GROUND OPERATING WEIGHT OF 46, 000 LBS. EXCAVATOR SHALL HAVE HYDRAULIC THUMB ATTACHMENT OR A GRAPPLE ATTACHMENT AVAILABLE FOR USE. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________ ONLY ONLINE BIDS WILL BE ACCEPTED FOR THIS RFB. Emailed and hard copies delivered by any method WILL NOT BE ACCEPTED. See attached document How to Respond to an Online Bid through the Kentucky Vendor Self Service site ( updated). pdf. Please enter contact person, phone number and email in the Comments Section. Vendors should review and update, if necessary, all addresses and contact persons for their account prior to bid submission. This information will carry forward to a contract if awarded, therefore please ensure all information is correct.

Lot 2: TRACK HOE, HYDRAULIC, CRAWLER MOUNTED, DIESEL POWERED W/OPERATOR TO MEET THE FOLLOWING MIN SPECIFICATIONS: LONG REACH BOOM 50 FT AND BUCKET SIZE 1 CY, 140 HP, GROUND OPERATING WEIGHT OF 48, 000 LBS. EXCAVATOR SHALL HAVE HYDRAULIC THUMB ATTACHMENT OR A GRAPPLE ATTACHMENT AVAILABLE FOR USE. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 3: SHALL BE COMPATIBLE WITH LINE ITEM # 1. MINIMUM 4, 000 FT- LBS ( ENERGY CLASS) TO BE USED ON TRACK EXCAVATOR WITH 25' BOOM, MIN GROUND WEIGHT OF 46, 000 LBS OR GRATER AND MIN OF 145 HP OR GREATER. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 4: MIN 300 FT- LBS ( ENERGY CLASS) TO BE USED ON HIGH FLOW HYDRAULIC SKID STEER OR LONG REACH 50 FT MINIMUM EXCAVATOR. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 5: MULCHING HEAD WITH A MIN OF 24" CUTTING WIDTH. ATTACHMENT SHALL ALSO INCLUDE 90 DEGREE TILT MOUNT. TO BE USED ON TRACK EXCAVATOR 25' BOOM, MIN OF 145 HP AND 46, 000 LB MIN WEIGHT. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 6: MULCHING HEAD WITH A MINIMUM OF 36" CUTTING WIDTH. ATTACHMENT SHALL ALSO INCLUDE 90 DEGREE TILT MOUNT. TO BE USED ON TRACK EXCAVATOR 25' AND 50' BOOM LENGTH. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 7: TRUCK RENTAL W/OPERATOR, FOR ON HIGHWAY USE, TANDEM WITH 350 HP MINIMUM, WITH MINIMUM 16 FOOT BED. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 8: ARTICULATED TRUCK RENTAL W/OPERATOR, 25 TON OR GREATER 4 X 4 Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 9: 60 HP MIN DIESEL ENGINE, EQUIPPED WITH ANGLE/TILT AND CORNER CUTTING BLADE. 15, 000 LB MINIMUM OPERATING WEIGHT W/OPERATOR. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 10: 140 HP OR GREATER DIESEL ENGINE, EQUIPPED WITH ANGLE/TILT AND CORNER BLADE. 33, 000 LB MINIMUM OPERATING WEIGHT W/OPERATOR. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 11: OUTPUT OF MINIMAL 6 KW @60HZ WITH A HEIGHT OF 12 TO 30 FT, 4 LIGHTS PER UNIT. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 12: TRACKED SKID STEER MIN OF 70 HP WITH HIGH FLOW HYDRAULIC SYSTEM TO OPERATE SPECIAL ATTACHMENTS. SKID STEER WILL INCLUDE THE FOLLOWING BASIC ATTACHMENTS; BUCKET, HEAVY DUTY FORKS, SCRAP GRAPPLE BUCKET. THE FOLLOWING TWO ITEMS ARE HYDRAULIC FLOW SKIED STEER ATTACHMENTS THAT WILL BE PAID BY THE HOUR IN ADDITION TO SKID STEER/OPERATOR WHEN USED: 24 AND 40 INCH COLD PLANER ( MILLING HEAD) Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 13: CAPABLE OF WORKING WITH HIGH FLOW HYDRAULIC SKID STEER, MIN 70 HP. HIGH FLOW TYPE W/HYDRAULIC SIDE SHIFT. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 14: CAPABLE OF WORKING WITH HIGH FLOW HYDRAULIC SKID STEER 70 HP. HIGH FLOW TYPE W/HYDRAULIC SIDE SHIFT. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 15: CAPABLE OF WORKING WITH HIGH FLOW HYDRAULIC SKID STEER MIN 70 HP. HYDRAULIC- DRIVEN CONVEYOR HEAVY DUTY WITH 10" HEAD AND TAIL PULLEYS AND VARIABLE SPEED, RIGHT OR LEFT SIDE DISCHARGE WITH HYDRAULIC WIDTH/HEIGHT ADJUSTMENT. ADJUSTABLE SHOULDERING ANGLE AND SHOULDER WIDTHS OF 1- 3. 5', WEIGHT ( EMPTY) **** LBS. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 16: 125 HP MINIMUM WITH 84" SMOOTH DRUM AND ATTACHABLE SHEEP FOOT DRUM PAD. 10 TON MINIMUM OPERATING WEIGHT. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 17: 140 HP MINIMUM, 40 INCH WIDE DRUM CAPABLE TO MILL 12 INCHES IN DEPTH, MOUNTED ON MINIMUM 22, 000 LB RUBBER TIRED LOADER. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 18: ARTICULATED WHEEL LOADER W/OPERATOR A MINIMUM 150 HP AND 3. 5 CU YD MIN BUCKET CAPACITY. 18, 000 LB MINIMUM GROUND WEIGHT. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 19: PROVIDE FLAGGERS AND TRAFFIC CONTROL FOR MAINTENANCE OPERATIONS ON STREETS AND ROADS. PRICE PER MANHOUR INCLUDES FLAGGERS, WARNING SIGNS, FLAGGERS PADDLES, PPE, AND SET UP IN ACCORDANCE WITH KYTC STANDARD DRAWINGS. PRICE PER MANHOUR IS FOR EACH FLAGGER USED. VENDOR SHALL PROVIDE UP TO 6 FLAGGERS ( IF NEEDED) Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 20: OPERATING WEIGHT 63, 000 LBS MINIMUM, NET POWER 180 HP MIN, DIESEL POWERED, 30 METRIC TON MIN CLASS EXCAVATOR, EQUIPPED WITH UP TO 48" WIDE CY BUCKET WITH TEETH. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 21: SHALL BE COMPATIBLE WITH TRACK EXCAVATOR 25 FT BOOM, MIN 180 HP 63, 000 LB MIN WEIGHT. MIN 8, 000 FT- LBS ( ENERGY CLASS) Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 22: CAPABLE OF WORKING WITH HIGH FLOW HYDRAULIC SKID STEER, QUICK ATTACH, MINIMUM 6 FOOT CUT & 7 FT LONG. MIN 70 HP. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 23: IMPACT FREQUENCY RANGE 700- ****, OPERATING RANGE ****- **** PSI. COMPATIBLE WITH SKID STEER WITH HIGH FLOW HYDRAULICS MIN 70 HP. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 24: MINIMUM 12 FT BLADE MIN 130 HP, 29, 000 LB OPER WEIGHT Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 25: MUST BE 4 WHEEL DRIVE EQUIPPED WITH FLASHING SAFETY LIGHTS. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 26: TREE TRIMMER SHALL MEET THE FOLLOWING MIN REQUIREMENTS: OPERATING WEIGHT - 24, 300 LBS. NET POWER - 127 HP, 75' REACH FROM GROUND, AND COMOPOSITE BOOM ELECTRICALLY INSULATED. THIS EQUIPMENT SHALL BE EQUIPPED WITH A FRON MOUNTED HYDRAULIC BLADE THAT IS CAPABLE OF BEING OPERATED FROM THE CAB OF THE MACHINE. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 27: SHALL BE COMPATIBLE WITH LINE ITEM # 1. TO BE USED ON TRACK EXCAVATOR WITH BOOM. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 28: SHALL MEET THE MINIMUM SPECIFICATIONS: HYDRAULIC TRACKED EXCAVATOR W/OPERATOR; DIESEL POWERED 52 HP, 15, 900 POUND OPERATING WEIGHT, 7 METRIC TONS. RUBBER TRACKS, FRONT MOUNTED PUSH BLADE, ZERO TURN, OFFSET BOOM FOR MOBILITY AND CONFINED SPACE WORK. AS NEEDED THE ABILITY TO PROVIDE A 3 FOOT OR 18 INCH WIDE GENERAL PURPOSE BUCKET. VENDOR IS TO PROVIDE ON ( 1) PIECE OF THIS EQUIPMENT AT ANY GIVEN TIME. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 29: LARGE EXCAVATOR WITH BUCKET. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 30: HYDRAULIC BREAKER ATTACHMENT Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 31: SHALL MEET THE MINIMUM SPECIFICATIONS: TRUCK MOUNTED HYDRAULIC CRANE 55 TON W/OPERATOR, DIESEL POWERED 392 HP SINGLE ENGINE, 73, 000 POUND OPERATING WEIGHT, 110 FOOT BOOM LENGTH, 8X4X4 AXLE CONFIGURATION, MINIMUM LIFT CAPACITY OF 54. 5 TONS. ABILITY TO LIFT AND SWING 9. 1 TON 30' LONG CONCRETE BARRIER WALL AT A 40 FOOT FULL RADIUS. SUPPLY 1. 25 TO 2 CY CLAMSHELL BUCKET AS NEEDED TO DREDGE CHANNELS, REMOVE FLOOD DEBRIS, CLEAN MUD SLIDES FROM ROADWAYS, OR REMOVE AND LOAD TREES/BRUSH FROM RIVER BRIDGE PIERS. PRICE PER HOUR INCLUDES SUPPLYING AS NEEDED THE ABILITY TO PROVIDE BLOCKS, HOOKS, TAG LINES, RIGGING, CABLES, AND CRIBBING. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 32: THE VENDOR SHALL BE PAID $ **** IN EMERGENCY MOBILIZATION COSTS FOR EACH PIECE OF REQUIRED EQUIPMENT THAT IS DELIVERED TO THE WORK SITE AND BEGINS WORK WITHIN 24 HOURS OF NOTIFICATION. Vendor must include the manufacturer and model # for each piece of equipment bid. During the evaluation process, vendor will be asked to provide specifications for the models listed to allow for verification that the equipment meets the required specifications. Manufacturer and Model # ______________________________________________

Lot 1: DOUBLE A DURACELL PRO CELL **** * ( or Energizer) PK/24 Manufacturer Duracell Part # ****BKD Brand Preference Brand Name Only

Lot 2: TRIPLE A ( AAA) DURACELL PRO CELL **** * ( or Energizer) PK/24 Manufacturer Duracell Part # ****BKD Brand Preference Brand Name Only

Lot 3: NINE VOLT DURACELL PRO CELL * ( or Energizer) PK/12 Manufacturer Duracell Part # **** Brand Preference Brand Name Only

Lot 4: C DURACELL PRO CELL **** * ( or Energizer) PK/12 Manufacturer Duracell Part # **** Brand Preference Brand Name Only

Lot 5: BINDER VIEW WHITE 1. 5 INCH, SLANT RING Brand Preference All Brands are acceptable

Lot 6: BINDERS VIEW WHITE 1. 5 INCH , D RING Brand Preference All Brands are acceptable

Lot 7: BINDER WHITE 2 INCH ROUND D RING 375 SHEET CAPACITY Brand Preference All Brands are acceptable

Lot 8: BINDER NON- VIEW, BLACK 1 INCH , 275 SHEET CAPACITY Brand Preference All Brands are acceptable

Lot 9: BINDER BLACK 1. 5 INCH, SLANT D RING, 480 SHEET CAPACITY Brand Preference All Brands are acceptable

Lot 10: BINDER VIEW BLACK 2 INCH 3 RING, D RING, 175 SHEET CAPACITY Brand Preference All Brands are acceptable

Lot 11: BINDER VIEW, BLACK 1 INCH, 175 SHEET CAPACITY Brand Preference All Brands are acceptable

Lot 12: BINDER BLACK 3 INCH W/SLANT D RINGS, 600 SHEET CAPACITY Brand Preference All Brands are acceptable

Lot 13: WHITE 3 INCH , 460 SHEET CAPACITY BINDER Brand Preference All Brands are acceptable

Lot 14: BINDER WHITE 2 INCH ROUND RING BINDER , 375 SHEET CAPACITY Brand Preference All Brands are acceptable

Lot 15: BINDER BLACK 4 INCH, SLANT D RING, 775 SHEET CAPACITY Brand Preference All Brands are acceptable

Lot 16: BOOK PRESENTATION 12 CLEAR SLEEVES, LETTER SIZE, PROFESSIONAL DISPLAY Brand Preference All Brands are acceptable

Lot 17: SHEET PROTECTOR, LETTER, LIGHT WEIGHT, CLEARSHEET PROTECTOR BOX/100 Brand Preference All Brands are acceptable

Lot 18: BUSINESS CARDS, 2 X 3 1/2, MATTE WHITE Brand Preference All Brands are acceptable

Lot 19: BUSINESS CARDS, 2 x 3 1/2, MATTE IVORY, Brand Preference All Brands are acceptable

Lot 20: CALCULATOR TAPE 2 1/4" WIDE, 150 FT Brand Preference All Brands are acceptable

Lot 21: CLIP, BINDER, MINI . 25" WIDE Brand Preference All Brands are acceptable

Lot 22: BINDER CLIP 3/4" WIDE 3/8" CAPACITY * SMALL BOX/12 Brand Preference All Brands are acceptable

Lot 23: BINDER CLIP 1 1/4" WIDE 5/8" CAPACITY * MEDIUM BOX/36 Brand Preference All Brands are acceptable

Lot 24: CLIP , BINDER, LARGE 2" WIDTH, 1" CAPACITY Brand Preference All Brands are acceptable

Lot 25: CLIP, PAPER, STANDARD Brand Preference All Brands are acceptable

Lot 26: CLIP, PAPER, JUMBO Brand Preference All Brands are acceptable

Lot 27: CLIP, BUTTERFLY Brand Preference All Brands are acceptable

Lot 28: CORRECTION LIQUID PAPER - WHITE Brand Preference All Brands are acceptable

Lot 29: CORRECTION FILM 1/5 " WIDTH X 335 " LENGTH Brand Preference All Brands are acceptable

Lot 30: DIVIDERS PRE PRINTED TABLE OF CONTENTS PAPER DIVIDERS 1- 8 TABS, MULTICOLORED Brand Preference All Brands are acceptable

Lot 31: DIVIDERS BIG TAB INSERTABLE 8 TAB CLEAR PAPER BINDER Brand Preference All Brands are acceptable

Lot 32: DIVIDERS BUFF STOCK RING BINDER INDEXES, 8, LETTER, 3 HOLE PUNCH, CLEAR TABS SET/8 Brand Preference All Brands are acceptable

Lot 33: ENVELOPES NO. 10, PLAIN WHITE, DIAGONAL SEAM BOX/500 Brand Preference All Brands are acceptable

Lot 34: ENVELOPES NO. 10, WINDOW, WHITE, DIAGONAL SEAM BOX/500 Brand Preference All Brands are acceptable

Lot 35: ENVELOPE SUB 28, 6" X 9" BOX/100 CLASP Brand Preference All Brands are acceptable

Lot 36: ENVELOPE SUB 28, 9 X 12 BOX/100 CLASP Brand Preference All Brands are acceptable

Lot 37: ENVELOPE SUB 28, 10" X 13" BOX/100 CLASP Brand Preference All Brands are acceptable

Lot 38: SUB 28, 7. 5" X 10. 5" BOX/100 CLASP ENVELOPE Brand Preference All Brands are acceptable

Lot 39: ENVELOPE SUB 32, 12" X 15. 5" BOX/100 CLASP Brand Preference All Brands are acceptable

Lot 40: ENVELOPE SUB 28, 7. 5" X 10. 5" BOX/100 CLASP Brand Preference All Brands are acceptable

Lot 41: ENVELOPE 6" x 9" BOX/100 SELF SEAL Brand Preference All Brands are acceptable

Lot 42: ENVELOPE MOISTENER, QUICKSEAL ROLLER APPICATOR FOR ENVELOPE SEALING Brand Preference All Brands are acceptable

Lot 43: FASTENERS 2 " CAPACITY 2 3/4 " C. TO C. BASE AND COMPRESSOR Brand Preference All Brands are acceptable

Lot 44: FASTENER INDUSTRIAL STRENGTH 2 x 4 HOOK & LOOP STRIPS, WHITE, 2/PACK Brand Preference All Brands are acceptable

Lot 45: FILE EXPANSION W/CORD WALLET 15" x 10", 3 1/2" ( LEGAL) Brand Preference All Brands are acceptable

Lot 46: FILE FOLDER MANILA, LEGAL SIZE, SINGLE TOP 1/3 CUT * ASSORTED POSITIONS BOX/100 Brand Preference All Brands are acceptable

Lot 47: FILE FOLDERS MANILA, LETTER SIZE, SINGLE TOP 1/3 CUT, ASSORTED POSITION BOX/100 Brand Preference All Brands are acceptable

Lot 48: FILE FOLDERS MANILA, LETTER SIZE, SINGLE TOP 1/3 CUT, THIRD POSITION BOX/100 Brand Preference All Brands are acceptable

Lot 49: FILE FOLDERS 3- TAB POSITION LETTER, MANILA W/2- FASTENERS BOX/50 Brand Preference All Brands are acceptable

Lot 50: FILE FOLDERS 1/3 CUT LETTER, PLASTIC, ASSORTED POSITIONS BOX/100 Brand Preference All Brands are acceptable

Lot 51: FILE FOLDERS1/3 CUT TOP TAB, LETTER, ASSORTED COLORS BOX/100 Brand Preference All Brands are acceptable

Lot 52: FILE FOLDERSLETTER SIZE, 1/5 CUT BOX/25 HANGING Brand Preference All Brands are acceptable

Lot 53: FILE FOLDERSLEGAL SIZE, 1/5 CUT BOX/25 HANGING Brand Preference All Brands are acceptable

Lot 54: FILE JACKET, SLASH, LETTER. MANILA, ANGLED FRONT, FRONT SLIT Brand Preference All Brands are acceptable

Lot 55: FILE JACKET, OPEN TOP LETTER, MANILA Brand Preference All Brands are acceptable

Lot 56: EXPANSION FILE LETTER SIZE 5 1/4" Brand Preference All Brands are acceptable

Lot 57: EXPANSION FILE LEGAL SIZE 5 1/4" Brand Preference All Brands are acceptable

Lot 58: GLUE STICK . 28 OZ Brand Preference All Brands are acceptable

Lot 59: HIGHLIGHTER YELLOW Brand Preference All Brands are acceptable

Lot 60: HIGHLIGHTER ASSORTED Brand Preference All Brands are acceptable

Lot 61: 3 X 5 WHITE LINED INDEX CARD PK/100 Brand Preference All Brands are acceptable

Lot 62: 4 X 6 WHITE RULED INDEX CARDS PK/100 Brand Preference All Brands are acceptable

Lot 63: KEYBOARD CLEANER NON- FLAMMABLE 10 OZ DISPOSABLE COMPUTER Brand Preference All Brands are acceptable

Lot 64: LABELS, ADDRESS, 1" x 2 5/8" , WHITE LASER & INK JET LABEL Brand Preference All Brands are acceptable

Lot 65: LABELS, ADDRESS, 1" x 2 5/8" PERMANENT Brand Preference All Brands are acceptable

Lot 66: LABELS, ADDRESS, EASY PEEL, 1 X 4 Brand Preference All Brands are acceptable

Lot 67: MICROPORE BLACK# 1 INK PAD Brand Preference All Brands are acceptable

Lot 68: LABELS, ADDRESS, EASY PEEL, 1 1/3 X 4 Brand Preference All Brands are acceptable

Lot 69: LABELS, ADDRESS, PRES- A- PLY, LASER/INKJET 1 X 2 5/8 WHITE 7, 500/BOX Brand Preference All Brands are acceptable

Lot 70: LABELS, ADDRESS, PRES- A- PLY, LASER/INKJET 2/3 X 3 7/16 WHITE 252/BOX Brand Preference All Brands are acceptable

Lot 71: LABELS, MAILING, 2" x 4" PERMANENT Brand Preference All Brands are acceptable

Lot 72: LABLES, NAME BADGE, 2 1/3 X 3 38/8 100/PACK Brand Preference All Brands are acceptable

Lot 73: MARKER BROAD CHISEL TIP, BLACK Brand Preference All Brands are acceptable

Lot 74: MARKERS SHARPIE FINE POINT BLACK Brand Preference All Brands are acceptable

Lot 75: MARKERS DRY ERASE 4- COLOR SET PK/4 Brand Preference All Brands are acceptable

Lot 76: MARKERS SHARPIE EXTRA- FINE, BLACK BOX/12 Brand Preference All Brands are acceptable

Lot 77: MARKERS SHARPIE CHISEL, KING- SIZE BOX/12 Brand Preference All Brands are acceptable

Lot 78: NOTEBOOK 8 1/2 X 11 1 SUBJECT Brand Preference All Brands are acceptable

Lot 79: NOTEBOOK 8 1/2 X 11 5 SUBJECT Brand Preference All Brands are acceptable

Lot 80: NOTEBOOK REPORTER, 4" x 8", SPIRAL BOUND, WHITE, 70 SHEETS Brand Preference All Brands are acceptable

Lot 81: PAD, LINED LETTER SIZE, GUMMED, WHITE, Brand Preference All Brands are acceptable

Lot 82: PAD, LINED LETTER SIZE, 8. 5 X **** PERFORATED, WHITE, Brand Preference All Brands are acceptable

Lot 83: PAD, LINED LETTER SIZE, 8. 5 X **** PERFORATED, CANARY Brand Preference All Brands are acceptable

Lot 84: PAD, LINED LEGAL SIZE, PERFORATED, WHITE, WIDE RULED Brand Preference All Brands are acceptable

Lot 85: PAD LINED LEGAL SIZE, CANARY YELLOW, WIDE RULED Brand Preference All Brands are acceptable

Lot 86: PAD LINED 5" x 8", WHITE, GLUE TOP, WIDE RULED Brand Preference All Brands are acceptable

Lot 87: PAD, MEMO, 3 X 5 COLLEGE RULED, ASSORTED COLORS, 75 SHEETS TOP BOUND Brand Preference All Brands are acceptable

Lot 88: PAD, STENO, 6 X 9 GREGG- RULED 80 SHEETS Brand Preference All Brands are acceptable

Lot 89: PAD, STENO, 6" x 9", WHITE, GREGG RULED, CENTER LINE Brand Preference All Brands are acceptable

Lot 90: PAD, PHONE MESSAGE, 5. 5 X 11, WHITE, 100 SHEETS/PAD. 2 PADS/PACK Brand Preference All Brands are acceptable

Lot 91: PAPER - COPY WHITE, 20 LB. LETTER, 8 1/2 x 11 in, 10 REAMS/CTN 5, 000 SHEETS Brand Preference All Brands are acceptable

Lot 92: PAPER WHITE, 20 LB. , LEGAL, 8. 5 x 14 in. , 10 REAMS/CTN 5, 000 SHEETS Brand Preference All Brands are acceptable

Lot 93: PAPERWHITE, 20 LB. , LEDGER, 11 x 17 in, 10 REAMS/CTN 2, 500 SHEETS Brand Preference All Brands are acceptable

Lot 94: PAPER THREE- HOLE PUNCH, 500 SHEET PER REAM, 20 # Brand Preference All Brands are acceptable

Lot 95: PAPER CARDSTOCK 67 # WHITE, LETTER SIZE , VELLUM BRISTOL 250 SHEETS/REAM Brand Preference All Brands are acceptable

Lot 96: PAPER CARDSTOCK 110 #, WHITE, 8 1/2 X 11, 250 SHEETS/REAM Brand Preference All Brands are acceptable

Lot 97: PAPER 20 LB BLUE, 500 SHEETS/REAM Brand Preference All Brands are acceptable

Lot 98: PAPER 20 LB GREEN, 500 SHEETS/REAM Brand Preference All Brands are acceptable

Lot 99: PAPER 20 LB CANARY, 500 SHEETS/REAM Brand Preference All Brands are acceptable

Lot 100: PAPER 20 LB LILAC, 500 SHEETS/REAM Brand Preference All Brands are acceptable

Lot 101: PAPER 20 LB SALMON, 500 SHEETS/REAM Brand Preference All Brands are acceptable

Lot 102: PAPER 20 LB PINK, 500 SHEETS/REAM Brand Preference All Brands are acceptable

Lot 103: PAPER 20 LB GREY, 500 SHEETS/REAM Brand Preference All Brands are acceptable

Lot 104: PAPER 20 LB RED, 500 SHEETS/REAM Brand Preference All Brands are acceptable

Lot 105: PAPER, BUSINESS CARDS, 3. 5 X 2, MATTE WHITE 250/PACK Brand Preference All Brands are acceptable

Lot 106: PAPER, CALCULATOR ADD ROLLS 2 1/4 X 150', ROLL Brand Preference All Brands are acceptable

Lot 107: PEN RETRACTABLE BALLPOINT, FINE POINT, 0. 07 MM, BLACK INK Brand Preference All Brands are acceptable

Lot 108: PEN RETRACTABLE BALLPOINT, FINE POINT, 0. 07 MM, BLUE INK Brand Preference All Brands are acceptable

Lot 109: PEN RETRACTABLE BALLPOINT, FINE POINT, 0. 07 MM, RED INK Brand Preference All Brands are acceptable

Lot 110: PEN RETRACTABLE BALLPOINT, MEDIUM POINT, 1. 0 MM, BLACK INK Brand Preference All Brands are acceptable

Lot 111: PEN RETRACTABLE BALLPOINT, MEDIUM POINT, 1. 0 MM, BLUE INK Brand Preference All Brands are acceptable

Lot 112: PEN RETRACTABLE BALLPOINT, BOLD POINT, BLACK INK Brand Preference All Brands are acceptable

Lot 113: PEN RETRACTABLE BALLPOINT, BOLD POINT, BLACK INK Brand Preference All Brands are acceptable

Lot 114: PEN RETRACTABLE BALLPOINT, BOLD POINT, BLUE INK Brand Preference All Brands are acceptable

Lot 115: PEN STICK BALLPOINT, MEDIUM POINT, 1. 0 MM, BLACK INK Brand Preference All Brands are acceptable

Lot 116: PEN STICK BALLPOINT, MEDIUM POINT, 1. 0 MM, BLUE INK, Brand Preference All Brands are acceptable

Lot 117: PEN STICK BALLPOINT, MEDIUM POINT, RED INK Brand Preference All Brands are acceptable

Lot 118: PEN STICK BALLPOINT, FINE POINT, 0. 8 MM, BLACK INK Brand Preference All Brands are acceptable

Lot 119: PEN STICK BALLPOINT, FINE POINT, 0. 8 MM, BLUE INK Brand Preference All Brands are acceptable

Lot 120: PEN STICK BALLPOINT, FINE POINT, 0. 8 MM, RED INK Brand Preference All Brands are acceptable

Lot 121: PEN STICK BALLPOINT, BOLD POINT, BLACK Brand Preference All Brands are acceptable

Lot 122: PEN GEL RETRACTABLE, FINE POINT, BLACK Brand Preference All Brands are acceptable

Lot 123: PEN GEL RETRACTABLE, FINE POINT, BLUE Brand Preference All Brands are acceptable

Lot 124: PEN GEL RETRACTABLE, MEDIUM POINT, BLACK Brand Preference All Brands are acceptable

Lot 125: PEN GEL RETRACTABLE, MEDIUM POINT, BLUE Brand Preference All Brands are acceptable

Lot 126: PEN GEL REFILLS, FINE POINT, 0. 7 MM, BLUE/ASST COLORS Brand Preference All Brands are acceptable

Lot 127: PEN RETRACTABLE ROLLERBALL, EXTRA FINE POINT, 0. 5 MM, BLACK Brand Preference All Brands are acceptable

Lot 128: PEN RETRACTABLE ROLLERBALL, EXTRA FINE POINT, 0. 5 MM, BLUE Brand Preference All Brands are acceptable

Lot 129: PEN FELT/FIBER TIP , MEDIUM POINT, 0. 7 MM, BLACK Brand Preference All Brands are acceptable

Lot 130: PENCIL SHARPENER ELECTRIC, EXACTO MODEL ****, OR EQUAL Brand Preference All Brands are acceptable

Lot 131: PENCIL # 2 SOFT ECONOMY Brand Preference All Brands are acceptable

Lot 132: PENCIL WOODEN, # 2, PRE- SHARPENED, Brand Preference All Brands are acceptable

Lot 133: POCKET PORTFOLIO YELLOW TWIN Brand Preference All Brands are acceptable

Lot 134: POCKET PORTFOLIO LIGHT BLUE BOX/25 TWIN Brand Preference All Brands are acceptable

Lot 135: POCKET PORTFOLIO DARK BLUE BOX/25 TWIN Brand Preference All Brands are acceptable

Lot 136: POCKET PORTFOLIO RED BOX/25 TWIN Brand Preference All Brands are acceptable

Lot 137: POST IT POP- UP DISPENSER 3" x 3" MMM C **** Brand Preference All Brands are acceptable

Lot 138: POST IT 3" x 3" STANDARD PK/18 Brand Preference All Brands are acceptable

Lot 139: POST IT 3" x 5" MMM 655 Brand Preference All Brands are acceptable

Lot 140: POST IT 4" x 6" RULED PK/5 Brand Preference All Brands are acceptable

Lot 141: POST IT REFILL 3" x 3" MMM R 330, FANFOLD Brand Preference All Brands are acceptable

Lot 142: POST IT 4" x4" 6 PK, Brand Preference All Brands are acceptable

Lot 143: POST IT ECONOMY, 1 1/2" x 2" Brand Preference All Brands are acceptable

Lot 144: PUSH PINS, ASSORTED COLORS, 100/PACK Brand Preference All Brands are acceptable

Lot 145: RECEIPT BOOK CARBONLESS, 2- PART SPIRAL- COVER Brand Preference All Brands are acceptable

Lot 146: RUBBER BANDS SIZE 19; 3 1/2" X 1/16" ( THIN) BOX/1500 Brand Preference All Brands are acceptable

Lot 147: RUBBER BANDS SIZE 33; 3 1/2" X 1/8" ( MEDIUM WIDTH) PK/700 Brand Preference All Brands are acceptable

Lot 148: RUBBER BANDS SIZE 64; 3 1/2" X 1/4" ( THICK) 1 LB BAG Brand Preference All Brands are acceptable

Lot 149: RUBBER BANDS SIZE 117B; 7" X 1/8" ( LONG W/MEDIUM WIDTH) 1 LB BAG Brand Preference All Brands are acceptable

Lot 150: SCISSORS 8", STAINLESS STEEL STANDARD , POINTED TIP Brand Preference All Brands are acceptable

Lot 151: STAMP PAD PRE- INKED STAMP, 1 5/8 X1/2 BLUE AND RED Brand Preference All Brands are acceptable

Lot 152: STAPLE REMOVER, PLASTIC, LIGHTWEIGHT Brand Preference All Brands are acceptable

Lot 153: STAPLER DESKTOP , 20 SHEET CAPACITY, Brand Preference All Brands are acceptable

Lot 154: STAPLES STANDARD, 1/4" BOX/5000 Brand Preference All Brands are acceptable

Lot 155: STAPLES HEAVY DUTY, 3/8" BOX/1000 Brand Preference All Brands are acceptable

Lot 156: STORAGE BOXES LETTER/LEGAL WITH LID WHITE, MAX STRENGTH, Brand Preference All Brands are acceptable

Lot 157: STORAGE BOXES LETTER/LEGAL WITH LID WHITE, Brand Preference All Brands are acceptable

Lot 158: TAPE DISPENSER STANDARD, DESK Brand Preference All Brands are acceptable

Lot 159: TAPE FOR DESK DISPENSER 3/4" x ****, Brand Preference All Brands are acceptable

Lot 160: TAPE FLAG 1" x 1. 7" MMM 680, SOLID PURPLE Brand Preference All Brands are acceptable

Lot 161: TAPE FLAG 1" x 1. 7" MMM 680, SOLID RED PK/50 Brand Preference All Brands are acceptable

Lot 162: TAPE FLAG 1" x 1. 7" MMM 680 BRIGHT PINK PK/50 Brand Preference All Brands are acceptable

Lot 163: TAPE FLAG 1" x 1. 7" MMM 680 BRIGHT GREEN PK/50 Brand Preference All Brands are acceptable

Lot 164: TAPE FLAG 1" x 1. 7" MMM 680 ORANGE PK/50 Brand Preference All Brands are acceptable

Lot 165: TAPE FLAG 1" x 1. 7" MMM 680 WHITE PK/50 Brand Preference All Brands are acceptable

Lot 166: TAPE FLAG 1" x 1. 7" MMM 680 ASSORTED COLORS PK/120 Brand Preference All Brands are acceptable

Lot 167: TAPE PACKING HEAVY DUTY Brand Preference All Brands are acceptable

Lot 168: TAPE PACKING HEAVY DUTY WITH DISPENSER Brand Preference All Brands are acceptable

Lot 169: DURACELL BATTERY COPPERTOP AAA ALKALINE Manufacturer DURACELL Part # **** Brand Preference Brand Name Only

Lot 170: DURACELL BATTERY ALK SPECIALTY 76A Manufacturer DURACELL Part # **** Brand Preference Brand Name Only

Lot 171: BATTERY ALKALINE AAA Brand Preference All Brands are acceptable

Lot 172: BATTERY ALKALINE AA Brand Preference All Brands are acceptable

Lot 173: BINDER WHITE 1 INCH WITH LABEL HOLDER, 275 SHEET CAPACITY Brand Preference All Brands are acceptable