BidHits™ uses cookies to provide an individualized service and care for the privacy and protection of shared data.
By browsing this site, we understand that you agree to the terms of our Privacy Policy.
USNS SOJOURNER TRUTH ( T- AO 210) Stern Tube Seal Parts - USNS SOJOURNER TRUTH ( T- AO 210) Stern Tube Parts. See SF **** and Other than Full and Open Competition Memorandum for additional details.
Stern tube seal parts, stern tube parts aft chrome split non stand. size 670, fwd liner cast iron split size 630, aft seal system, fwd seal system
AI helper
This solicitation is for stern tube seal and parts for USNS Sojourner Truth (T-AO 210). Offers must include a price quote identifying requested supplies, unit price, extended price, and total firm fixed price. Technical submissions must include a description and part number for each item. Delivery must be on or before March 1, 2027, to MSC warehouse in Norfolk, VA. Quotes must be emailed to the contracting officer and contract specialist. The evaluation considers technical acceptability and price reasonableness.
Delivery must be on or before March 1, 2027, to MSC warehouse in Norfolk, VA. delivery on or before 2 each ship to delivery date 01 mar dodaac: **** fob details2027
Payment will be made by code, and invoices should be submitted to the address shown in block 18a. payment will be made by codeofferor codetelephone number
The government will evaluate quoted pricing for reasonableness, and the quote must be technically acceptable. the government will evaluate quoted pricing for reasonableness.
Ship and base access is required for preaward ship visits. ship and base access is required for preaward ship visits e. g. shipcheck and contractperformance.
Quotes containing vendors' standard commercial terms and conditions may be considered a material defect and rejected. any quote submitted in response to this solicitation, which includes the vendors standard commercial terms andconditions may be considered a material defect and may be rejected as being nonresponsive to the solicitation.
The successful quoter shall accept the purchase order in writing to form a binding contract. to form a binding contract between the parties, the successful quoter shall accept the purchase order inwriting.
Main Condenser and Air Injector Parts - The contract has been awarded for the procurement of new Main Condenser and Air Injector parts in support of the USS KEARSARGE ( LHD- 3). The parts procured under this contract include: Inlet GasketsOutlet GasketsInner GasketsTube Packing ( Copper) CU Fib
Main condenser and air injector parts Inlet gaskets, Outlet gaskets, Inner gaskets, Tube packing ( copper), Cu fib - **** ship and boat propulsion components, Packing, Ferrules
AI helper
Contract awarded for new main condenser and air injector parts for USS Kearsarge (LHD-3). Parts include inlet gaskets, outlet gaskets, inner gaskets, tube packing (copper), Cu fib - **** ship and boat propulsion components, packing, and ferrules.
CT7 Spare Parts - SOURCES SOUGHT NOTICE **** SYNOPSIS: This is not a solicitation announcement. This is a sources sought synopsis only. This is NOT a request for proposals and in no way obligate
Spare parts for CT7 engines Part Number Nomenclature, EST QTY, **** Power Turb. Mod. , **** Gearbox Propeller, **** Asy, GG Rotorstator, **** Comp Assy Rotor, Sta, **** H. M. U, **** Nozzle Assy. Stage, **** Inlet Frame, **** Cont Unitdigelec, **** Valve, **** Pump, **** Shaftprop. Gear. Dr. , **** Pump, **** Exciter, **** Fuel Filter Assy, **** Pump, Boost Fuel, **** Cable, **** Swirl Plate, **** Sensor, **** Trimmer, **** Housingbypass Port, **** Diferencial Pres Sw, **** Injector Assy Fuel, **** Bracket RH, **** Bracket LH, **** Sensor, **** Manifold Assylube, **** Valve Cold Oil Reli, **** No. 3 Bearing, **** Housing Seal Assy, **** Bracket, Main Frm RH, **** Tube, **** Tubehmutofuel Fi, **** Detector, **** Bowlfilter, **** Seal Encased, **** Leadelect. Ignition, **** Indicator, ****
AI helper
This is a Sources Sought Synopsis for spare parts for CT7 engines used on HC-144 maritime patrol aircraft. The USCG is seeking information on manufacturers and suppliers of new, zero-time components with FAA Form **** and OEM traceability. Responses are due by August 3, 2026, 3:00 PM EST, via email to ***@***. *. * company details, quality systems, product information, lead times, and warranty terms. This is not a request for proposals and does not obligate the government to award a contract.
Responses must be received no later than 03, Aug 2026 at 3:00pm est.
Please provide the details and terms of any standard warranty included with the product.
Responses should include details on company quality systems and documentation that provides traceability to the OEM for each part.
Firms responding to this announcement that fail to provide all of the required information cannot be used to help the government make the appropriate contract decisions.
request for quotation 1 36 ea **** **** category descr: **** delineator reflectordescription: adhesive, highstrength, longlasting, heavy duty metalsealant, sb12 metalbond forms water resistant bonds, 10. 3 oz. tube, 12 tubes per case, 12 month shelf life, color: aluminum gray. manufacturer part number : sb12 surebond 2 100 ea **** **** category descr: **** delineator reflectordescription: anchor, hilti expansion, 14 in. x 1 in. , consisting ofa stainless steeldrive pin and an alloy expanding bodyfor fastening in concrete and masonry. 100 each perpackage. manufacturer part number : **** hilti
AI helper
This is a request for quotation for delineator reflectors. Bidders must indicate the delivery date in their bid response. If bidding on an item other than the specified manufacturer part number (MPN), a spec sheet and visible picture must be provided, and the item must be included in the vendor remarks. Freight charges will not be accepted unless listed in the comments. Bidders are approved to ship prior to the requested delivery date and should provide a delivery window timeframe in their remarks. Communicate if the order will be shipped in its entirety or split. A packing slip must be included with all shipments. For small procurements, if bidding anything other than the specified MPN, provide a spec sheet, visible picture, and item. Freight charges will not be accepted unless listed in the comments. Approved to ship prior to requested delivery date. Include the word prime or alternative in bidder remarks for each line item bid. Include the item for each prime item bid, and a spec sheet with each alternative item bid. A packing slip must be included with the shipment of items. Provide a delivery timeline in the bid response. Exceptions to PTC bid terms and conditions must be listed on a separate sheet labeled Exceptions to Bid Conditions and Specifications and attached to the bid. Failure to provide stock part number and manufacturer of alternate units, or illustrated bulletin/specification of alternate units, will be deemed sufficient reason for rejection of the bid.
The bid invitation details specify a required delivery date of **** for both line items.
The bid notice states that if bidding on items from a manufacturer other than the referenced manufacturer, the bidder must show for each item the stock part number and manufacturer of the item they propose to furnish, and illustrated bulletin or specification of alternate units proposed to be furnished must accompany the bid. Failure to do so will be deemed sufficient reason for rejection of the bid.
HRDWRWRK GLOVES D4STOR **** 1 5 ea **** **** category descr: **** compliant prot equipdescription: balaclava, fire resistant as per attached specification. manufacturer part number : h18cx national safety appareldelivery addressplymouth meeting dist 4 **** gallagher roadplymouth meeting, pa **** us 2 2 pr **** **** category descr: **** work glovesdescription: gloves, foam insulated lining, orange pvc, liquidproofnot necessarily chemical resistant, for cold weatheruse, vinyl coating over foam insulation and deep cottonfleece lining, curved fingers, wing thumb, fully coatedrubberized safety cuff. manufacturer part number : glosc federaldelivery addressplymouth meeting dist 4 **** gallagher roadplymouth meeting, pa **** us 3 5 ea **** **** category descr: **** delineator reflectordescription: adhesive, highstrength, longlasting, heavy duty metalsealant, sb12 metalbond forms water resistant bonds, 10. 3 oz. tube, 12 tubes per case, 12 month shelf life,
AI helper
This is a Request for Quotation for HRDWRWRK GLOVES D4STOR 41826. The bid due date is May 1, 2026, at 2:00 PM ET. Bidders must indicate the delivery date in their response. If bidding anything other than the specified MPN, a spec sheet and visible picture must be provided, and the item included in vendor remarks. Freight charges will not be accepted unless listed in the comments. Approved to ship prior to requested delivery date, and provide delivery window timeframe in bidder remarks. Communicate if the order will be shipped in its entirety or split. Include a packing slip with all shipments. For small procurements, if bidding anything other than the specified MPN, provide a spec sheet, visible picture, and item. Exceptions to bid conditions and specifications must be listed on a separate sheet attached to the bid. The delivery address for all items is Plymouth Meeting Dist 4 Inventory, **** Gallagher Road, Plymouth Meeting, PA **** US. Required delivery date for all items is May 18, 2026.
The required delivery date for all items is May 18, 2026. The bid due date is May 1, 2026, at 2:00 PM ET.
If bidding anything other than the specified MPN, please provide a spec sheet and include item in vendor remarks. If bidding the prime, please indicate in vendor remarks. Illustrated bulletin or specification of alternate units proposed to be furnished must accompany your bid. Failure to do so will be deemed sufficient reason for rejection of your bid.
The bidder shall list on a separate sheet of paper any variations from, or exceptions to, the conditions and specifications of this bid. This sheet shall be labeled: exceptions to bid conditions and specifications and shall be attached to the bid.
We selected the most helpful reviews from real users. Order may change periodically.
You see a lot of tenders; you get emails with the alerts.
M. Camarasa
All bids related to our product are captured by you and sent to us. In my opinion, it’s perfect—broad coverage and easy searches across the bid documents.
R. M. Ferreira
It's an extremely useful tool.
M. M. Alv
Excellent information. Just what I was looking for.
L. H. Borrelli
It encompasses all portals in one place.
G. Ferrea
Efficiency in search times.
R. Chavez
I consistently received notifications about bids within the specific segment I chose to monitor. The system simplifies processes that used to be complex, offering a navigation experience that is easy, fast, and modern.
G. P. da S. E. Guimaraes
They notify me promptly when a contest is published.
L. Salazar
I like the way they provide information with the greatest possible accuracy. I love that.
M. A. Neil
I quickly find the bids that interest me.
S. Roque
The platform is very user-friendly.
N. Lobato
The idea of ​​using a keyword and sending the information by email is very good.
U. Solutions
I’m notified immediately about every bid that opens in my area. It really helps my work.
BidHits is a government bid search engine that monitors official portals and brings relevant federal, state and local opportunities into one place. You can search on the site and receive scheduled email alerts.
Enter your email and activate the trial. For 14 days you can use the main features, including alerts and access to results. When it ends, if you do not subscribe at /subscription.php, the bid list becomes limited and you will not be charged automatically.
1) Add keywords that describe what you sell. 2) Start the trial. 3) Adjust regions, delivery times and email style after signup.
Whenever possible, yes. Some official portals require login or block direct links; in those cases we point you to the official process page so you can download the documents.
Yes. You can filter by region, procurement method, dates and value ranges. You can also save preferences for future alerts and searches.
Yes. In the dashboard you can see bids on a map and use it to plan follow-up by location.
It can happen. Smart Search uses your keywords to find related opportunities, not only exact matches. Add specific terms and remove off-topic results to improve future alerts.
Yes. You can query bids via API. Documentation at /api_integration.php. Ideal for CRM, BI and automations.
In Settings you can pause alerts or adjust delivery times. If you want to delete your account, just contact us. During the free trial there is no auto-charge.
We monitor major official sources every day at the federal, state and local levels. New bid notices are added as soon as they are captured from the source portal.
Plans start at $ 43.00 per month, with options for different business needs and billing terms. Start with a free trial and evaluate the results before subscribing, with no automatic billing.
Add what you sell, get scheduled alerts, open documents or the official page, and use filters by region and method.
Transcript
Welcome to BidHits.
Finding public tenders and bids is important. But what really matters is quickly identifying the opportunities that match what your company sells.
To get started, enter a few keywords that describe your products or services. BidHits shows relevant opportunities, highlights your keywords, and organizes everything by date.
Smart search is already enabled and uses artificial intelligence to expand your results, even when the tender uses different words from the ones you searched for.
For each opportunity, you can view a summary, access documents, mark it as a favorite, add private notes, remove what is not relevant, or view it on the map.
You can also use filters, run searches, and explore the day's opportunities directly on the map.
Start using BidHits now. It's fast, practical, and you can try it for free.
AI Assistant
Ask me about the bid...
Loading summary...
Methodology
Unaided survey with 1097 active users, conducted through 09/18/2026.
Single question: "Would you recommend our services to a friend or colleague?" - 90% answered "yes".