Latest US Boat Inspection Contracts & Bids

The document details specifications for dockside repairs on the USCGC James WMSL 754 for FY2026. It lists numerous work items, including air conditioning plant maintenance, cargo elevator inspection, deck covering repairs, and various tank cleaning and preservation tasks. The document also specifies numerous government-furnished property items and critical inspection items. It includes detailed requirements for contractors, including specific references to standards, drawings, and publications. Additional documents, such as fire safety plans, are required to be submitted. Quality control measures, including surface profile and soluble salt conductivity measurements, are also outlined. The document also specifies requirements for welding, environmental protection, and personnel qualifications. There are specific requirements for the renewal of resilient mounts, pipe flushing, hydrostatic testing, and refrigerant recovery. The document also includes a list of references, including Coast Guard drawings, technical publications, and standard specifications.

The solicitation is for OEM parts for rigid-hulled inflatable boats and lifeboats. The closing date for submission of quotes is July 31, 2025. Questions regarding the solicitation must be submitted one day prior to the closing date. Offerors must note any exceptions to the solicitation's terms, conditions, specifications, and statement of work. Delivery is FOB destination to USNS Charles Drew. Quotes must include shipping costs. The government reserves the right to make a single award to the offeror whose quote is considered in the best interest of the government. All offerors must be registered with the System for Award Management (SAM). Vendors requesting base access must register with DBIDS. Delivery requires 48-hour advance notification to mscpac ***@***. *. * must be via a fully traceable commercial freight method. Inspection and acceptance will be performed by N62387. The contract incorporates various FAR and DFARS clauses, including those related to payment, small business concerns, and equal opportunity.

This tender, a Request for Quote (RFQ), seeks quotations for three new, complete, and operational watercrafts with trailers. The Bureau of Reclamation requires watercrafts with specific minimum specifications (length, weight capacity, motor, etc. ) and trailers meeting DOT regulations. Delivery is to the Wyoming Area Office warehouse at 205 Chamberlain Road, Mills, WY 82644. The anticipated delivery date is on or before April 1, 2026. Offerors must provide detailed specification sheets with their quotations. Payment will be made via the Invoice Processing Platform (IPP). Various FAR and DIAR clauses are incorporated by reference, including requirements for security, small business set-asides, and other compliance matters. Additional documents are required, and the deadline for offer submission is June 25, 2025, at 10:00 AM MD.

The USCG Surface Forces Logistics Center requires the overhaul of Hamilton Jet HJ 292 and HJ213 jet drives. The overhaul must be completed within 60 calendar days after approval of the core condition report. The contractor must provide all labor, equipment, special tools, parts, and materials. OEM parts must be used. A one-year warranty from installation or **** operating hours, whichever occurs first, and 24 months of storage is required. The contractor must submit a core condition report within 10 calendar days of receiving the jet drive units, and a disassembly report 15 calendar days after the core condition report. Additional documents, such as bench test reports, are also required. The contractor must notify the contracting officer's representative (COR) at least 7 calendar days prior to inspections or monitored testing. The contractor must supply a technical representative to the designated location within 36 hours after notification. The government reserves the right to supply government-furnished property (GFP) at any time during the contract. The contractor is responsible for the performance of all inspection requirements and must maintain an inspection system that meets the requirements of ASQC Q9003-1994. The contractor must maintain a test equipment calibration program in compliance with ANSI/NCSL Z540, dated 2006. The contractor must provide space, personnel, and test equipment for conducting all inspection requirements. The contractor must perform all services onboard the USCG vessel unless otherwise directed by the contracting officer. The contractor employees shall generally perform all work between the hours of **** and **** local time, Monday through Friday. However, contractor employees shall be required to work other than normal business hours, including weekends and holidays. The services will primarily be required in vessel homeports located throughout the continental United States, Hawaii, and Alaska. The contractor shall be required to supply a technical representative to the designated location within thirty-six 36 hours after notification by the contracting officer. The contracting officer shall establish the dates the technical representative is required. Task orders will be issued by the Surface Forces Logistics Center (SFLC) stating where and when the services are required. The SFLC will supply the contractor with the nature of the problem if known along with a point of contact (POC) and phone number. The contractor shall be responsible to contact the POC within twenty-four 24 hours after notification by the contracting officer. The results of the representative's findings shall be provided in writing within twenty-four 24 hours of arrival. Approval to perform repairs will be made by the contracting officer after evaluation from the USCG contracting officer's technical representative. All internal/external surfaces of metal shipping containers shall have all scale and loose paint removed. The containers will then be primed and painted with two coats of the corresponding colors mentioned below and cited in FED STD 595 C with change notice 1 using paint in accordance with commercial item description (CID) AA2962A. The contractor shall place a total of 80 units of desiccant conforming to **** activated bag in the interior of the shipping container. Each preserved and packaged item shall be marked with the stock number, model number, item name, serial number, contract number, task order number, gross weight in lbs, condition code, quantity, and unit of issue, and labeled Coast Guard SFLC material. The contractor shall supply bar code labels on all contract line item numbers (CLIN) except for those that require data submissions only. All barcoded labels shall be in accordance with SFLC specification **** Rev G, Feb06. The actual labels shall be type V, grade A, style 2, composition B with plastic laminate. Each label shall contain encoded data for the stock number, contract number, and the t

This is a Request for Quotation (RFQ) for ship and boat propulsion components overhaul and repair. The USCG SFLC requires the opening, inspection, and possible overhaul of item(s) with National Stock Number (NSN) **** 01 627 **** are requested, and a written solicitation will not be issued. The deadline for submission of quotes is June 20, 2025, at **** AM Eastern Daylight Savings Time (EDT). All questions regarding this notice must be submitted in writing to ***@***. *. * no later than 2 days before the notice closes. Delivery is required by August 1, 2025. Delivery must be made Monday through Friday between 7:00 AM and 1:00 PM. Delivery is F. O. B. destination. Inspection and acceptance will take place after verification of preservation, individual packaging, and marking requirements, and confirmation of no damage during transit. Failure to comply with packaging requirements will result in rejection and nonpayment. The vendor must be registered at www. ***. *. * prior to quote submittal. Each offeror's record in FAPIIS will be reviewed prior to award. Award will not be made to any offeror with adverse financial information or exclusions. Offerors shall include a completed copy of the provision at ****, Offeror Representations and Certifications, with their offer. A total firm fixed price with inspection fee for all necessary equipment and shipping cost to the addresses shown under delivery must be provided. Several FAR clauses are incorporated by reference.